496152
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
5.1
8b: Operation - 2
Digital Modes
Selecting an Analogue Input
The 8000AP will detect and display the format of the source
material received. Press the MODE key on the handset or
front panel to cycle through the options relevant to that
format. For example, when receiving Dolby Digital 3/2.1
(5.1) you have the option to apply “EX” processing to create a
back channel or “Stereo Downmix” if you just want to listen to
2 channels.
If, for any given input source, a mode option is changed the
8000AP will remember this change and use the last option
applied whenever the same encoded material is detected.
There are four Analogue inputs:
Additionally there is a input and a input.
may be selected by pressing the
appropriate input keys on the remote handset or by pressing
the button on the front panel until the desired
source is shown in the display window.
allows a tape monitor function (if you have a
three head recorder).This enables you to compare the quality
of a tape recording to the original at the time of recording.
The selected analogue input, the left and right channel of the
5.1 input or the left and right channel of a processed digital
signal are connected to the output when you
select the relevant input.
You may listen to the analogue tape input by pressing the tape
key on the remote control, or the tape button on the front
panel of the 8000AP.
routes the 5.1 analogue inputs on the rear
panel directly to the volume control on the 8000AP. When you
select this input you will hear a relay operate as the input is
selected and all processing functions are disabled.
When this input is selected you can only alter the volume and
balance. You can also trim the channel parameters via the
OSD menu.
VCR, SAT, TV, AUX.
TAPE 5.1 bypass
An analogue source
analogue
The TAPE input
TAPE OUT
The 5.1 input
Note: The titles of the analogue inputs are descriptors: all the
analogue inputs are identical as are the digital optical inputs
and the two HDMI inputs.
Analogue Screen Displays and Modes
Active Channels
The four regular analogue inputs and the Tape input all
operate in the same way.
Pressing the MODE button will invoke several matrixed post
processing modes. With the exception of PLII Movie
DTS Neo 6 Cinema, parameter adjustments for the other
modes can be accessed in the Setup menu. (
The options available will reflect only your chosen
loudspeaker configuration. For example, if you only have
Stereo loudspeakers or have enabled only the Front
loudspeakers the available options will default to Stereo only.
All processing modes are disabled when this input is selected
The Active channel lights tell you which outputs, at any given
moment, have audio present.
The basic operating mode is 2 Channel Stereo.
5.1 bypass input
Dolby
and
See Page11).
NOTE:
centre
subwoofer/LFE
front rightfront left
surround rightsurround left
back rightback left
AUX
TV
VCR
SAT
analogue
tape
TAPE
5.1 bypass
AUX VOL -30dB
ANALOG Stereo
AUX VOL -30dB
ANALOG PLII Movie
AUX VOL -30dB
ANALOG PLII Music
AUX VOL -30dB
ANALOG NEO:6 Cinema
AUX VOL -30dB
ANALOG NEO:6 Music
5.1 Bypass VOL -30dB
Page14
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Audiolab 8000AP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Audiolab 8000AP in de taal/talen: Engels als bijlage per email.

De handleiding is 3,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info