520130
18
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
18
Do not use any device where the switch can not be
switched on and off. Damaged switches must be repaired
or replaced immediately by the customer service.
The hedge shears has a two-hand protective shut-down which
prevents an unintended switching on.
Â
Push the circuit closer/breaker on the rear handhold (7)
and operate at the same time with the other hand the switch
button on the front handhold (5).
Switching off
For switching off the device release the circuit closer/breaker or
the switch button.
Adjustments on the hedge trimmer
Turn handhold (Type HA 620/55; HA 710/61)
The handhold can be set to 5 working positions (45° raster)
 During the setting the circuit closer/breaker on the rear
handhold (7) can not be operated.
Â
Hold the hedge shear on the front handhold (5).
 Push the switch (11) backwards.
 The rear handhold (7) can be turned into the desired
position.
 Release the switch (11) and make sure that it engages. The
handhold is fixed.
Working instructions
You may not start to operate the machine until
you have read these operating instructions,
observed all the instructions given and installed
the machine as described!
Observe all safety instructions in any case.
Before commencing work, ensure the following:
Workplace tidied?
You may not start to operate the machine until you have
read these operating instructions, observed all the
instructions given and installed the machine as described!
Always keep the ventilation apertures free.
Scare animals off the hedge before starting to cut in order to
prevent them from being injured.
 Best time for hedge trimming:
Leaved hedge: June and October
Conifer hedge: April and August
Quickly growing hedge: from May and then every 6
weeks
Working with the hedge trimmer
Hold the hedge trimmer with both hands on a safe
distance from the body.
 The extension cable must be kept behind the hedge
trimmer when cutting so that it cannot be caught by the
knives.
Â
Due to its double sided knives the hedge trimmer can
be guided forward and backward or by oscillating
movements from one to another side?
Â
At first cut the sides of the hedge and then the upper
edge.
Â
Cut the hedge from the bottom up.
 Cut the hedge in trapezium shape.
 Stretch a guide over the complete length of the hedge when
you want to shorten the upper edge of the hedge evenly.
 Remove unconditionally any foreign objects out of the
hedge (e.g. wires) as these can damage the knives of the
hedge trimmer.
Maintenance and Care
Remove the plug from the power socket
before starting any maintenance or
cleaning work.
Maintenance and repair work other than those described in this
chapter is only allowed to be carried out by service staff.
For maintaining and cleaning, removed security devices must
unconditionally be mounted properly and proved again.
Use only original parts. Other parts can result in unexpected
damages and injuries.
Maintenance
The cutting tool will not come to a standstill immediately after
cut-off. Before starting any service work wait until all parts are
stationary.
To guarantee a long and reliable usage of the product carry out
the following maintenance works regularly.
Check the machine for obvious defects such as
loose, hung out or damaged cutting tools
worn or damaged components
correct assembly and faultless covers and protective
devices.
Necessary repair works or maintenance have to be carried
out before using the power tool.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Atika HA500-51 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Atika HA500-51 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info