628507
79
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
EF1210 C
OMMAND
S
ET
R
EFERENCE
ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 77
SAVENV
M
-
SAVE
CURRENT
SETTINGS
TO
NON
-
VOLATILE
MEMORY
IN
MEMORY
SLOT
M
The SAVENV
m
saves the EF1210’s current settings to non-volatile memory. These
settings will be used as the default settings each time the EF1210 is powered on. The
default settings may also be restored by sending the RESTNV
m
command.
Please note that audio may drop out for a second while the EF1210 writes to non-vol-
atile memory. Normally, the SAVENV
m
command is used during the configuration
process, when a conversation is not taking place.
Once the SAVENVm command is sent from the host to the EF1210, the save process
begins. When the save process is completed, the EF1210 sends the SAVENVm com-
mand back to the host as an acknowledgment. The variables that are saved as a result
of this command are listed at the end of this document. Refer to “Default Values and
Saved Parameter List” on page 84.
There are 4 storage locations for saving settings. These can be used to store different
user configurations. When the EF1210 boots up, it loads the settings from slot 0. In
other words, whatever settings you save to slot 0 will be restored every time you reset
the EF1210. This provides a way of setting the power-on defaults. Also, every time
you perform a front-panel setup, the results of the setup are saved to slot 0. This is
done so that you don’t have to set up the EF1210 every time you lose power.
Remote Commands
The following commands can be sent by the remote control device to save the current
settings in non-volatile memory.
EF1210 Messages
The EF1210 sends the following message in response to a SAVENV
m
command, if
acknowledgment mode is enabled.
Example
In the following example, the remote control device saves the settings of the EF1210
with Device ID number 12 in memory slot 0
Remote Command Effects
SAVENV
m
Save settings to non-volatile memory slot m.
m ranges from 0 to 3.
EF1210 Message Message meaning
SAVENV
m
The settings were successfully saved to non-vola-
tile memory slot m.
m ranges from 0 to 3.
Remote Command EF1210 Message
C12SAVENV0 C12SAVENV0
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aspi EF1210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aspi EF1210 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Aspi EF1210

Aspi EF1210 Aanvulling / aanpassing - English - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info