Change degree of measurement for temperature
The temperature can only be displayed in either °C or in °F on the
base sensor and radio sensor.
Base unit
X Keep the MIN/MAX button pressed for approx. 2 seconds, in
order to change the displayed unit of measurement.
Radio sensor
1. Open the battery panel on the back.
2. Press the C/F button 1x.
Reset weather station
If obviously incorrect values are being displayed, you should reset
the weather station to its factory settings.
1. Remove the batteries from the weather station and reinsert
them.
When the batteries are inserted in the base station, all indica-
tions will briefly been shown in the display. The display will also
briefly illuminate and sound a beep tone.
After approx. 20 seconds, the display begins to flash and the data
from the radio sensors is queried.
2. Pay attention to the displayed values.
3. If incorrect values continue to be displayed: Remove the
batteries from the radio sensors used and reinsert them.
4. Proceed as described from page 10.
