629246
1
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
1 LED
Visual call indicator
2 Hotkey
Freely-programmable key for up to 6 numbers/names or functions
3 Foxkeys
The current function is indicated in the bottom display line. Both Foxkeys are freely
programmable.
4 Display
The backlit display consists of 3 lines of text, each with 12 symbols/characters. The first line
consists only of symbols, the two others consist of information or menu options.
5 C/End key (deletion or correction key)
Deletion or correction key (clear).
Return to previous menu option or to the idle state.
6 Loudspeaker key
Switches the loudspeaker on/off
7 Call key
Has the same effect as lifting or replacing the handset of a corded terminal.
Also used for switching on the handset.
8 M-key (menu key)
This key is used to search for a menu option you desire. It operates cyclically, i.e. each
depression of the menu key will scroll you through the menu options.
9 i-key (information key)
Pressed to obtain further information (active i-symbol).
10 Volume adjustment keys (not visible)
Adjust the volume during conversation.
11 Keypad with 0 to 9 (A to Z), * and #
Used for entering characters, selecting extended-feature functions utilising */# procedures. In-
put of names and/or texts in alpha mode. (Automatic switchover from numeric to alpha input
following selection of corresponding menu option.)
Example: 1 x key 2 = D, 2 x key 2 = E, 3 x key 1 = C, 2 x key 7 = T
In alpha mode the #-key can also be used to create a space.
Operation and display elements
III
Specifications subject to change without notice.
The usable services and features depend on the installed software release.
20310997en_ba_a0
20310997en_ba_a0 1
English
Operation and display elements
Special display symbols
Charge state of battery pack
Not displayed: Charge is ok, handset is ready for operation
Blinking display: Charge is low (warning)
Blinking +
warning tone: Charge is very low
Antenna symbol
Not displayed: Outside of radio coverage range
Continuous display: Ready for incoming and outgoing calls
Continuous display: Handset is registered and ready for operation
in system A (B, C, or D).
Blinking: Handset is not ready for operation.
Blinking: Handset is not registered in any system.
Continuous display: Alpha dial feature is activated
Supplementary information (accessed by pressing i-key)
A function stored under the Hotkey/Foxkey is active or the vibrator
is active.
Further menus (trigger with M-key)
Microphone switched off
Programming mode
Continuous display: Connection made
Blinking: Visual signal indicating a call always present!
2 20310997en_ba_a0
Operation and display elements
Other symbols on the information or menu line:
Scrolling forwards through a list (the digit shows the entry’s
number)
Call for user group (internal subscriber group)
Diverted call
Function is active
Quality of the radio connection (only on idle display)
$$$$ Very good connection quality
$$$ Good connection quality
$$ Telephone calls possible, interference probable
$ Telephone calls possible only in part, severely restricted
.... No telephone calls possible
Note
You can also obtain the connection quality reading using "Long Click 4". The number of
the relevant radio unit is displayed at the same time.
12¥
G
D
|
20310997en_ba_a0 3
English
Operation: the menu system
You can program your new handset to meet your own requirements. Besides mobility, it
offers you every telephony function you could wish for. The menu technique and the cle-
ver Foxkeys see to that. To make full use of the extended-feature functions, please refer to
the chapter "How to program your telephone" and the special programming instructions.
In addition to the non-acoustic call display with LED a call can also be indicated by a
vibrator. The handset is splashwater-proof and dust-proof (IP 54). It is available for use in
potentially explosive environments with explosion protection as per Eex ib IIC T4.
General rules of operation
There are two types of menus:
Everyday operating menus for telephony functions.
Programming menus for setting your telephone to meet your requirements.
Display in idle state In the idle state the display features a number of symbols, the
quality indicator, the date and time as well as a personal standby
text (e.g. name, department, tel. no., etc.). (The display immediately
switches to "Discreet" or to "Enqui" "Micro" if a call comes in or
during a call.)
—> —> —> Press the M-key (briefly once or several times) to proceed to the
menu option you desire.
————————> A "Long click" of the M-key (at least 2 seconds) takes you to the
programming mode.
————————> A "Long click" of the Foxkey under "¥" changes the search
direction to "ß".
Idle state
Call up the desired menu using the M-key
Press M-key once
Press M-key a second time
Press M-key a third time
Press M-key a fourth time
Press M-key a fifth time
10.Apr 11:55
ABC Redial
10.Apr 11:55
Div. Discr
10.Apr 11:55
Msg. Announ
10.Apr 11:55
Pick–up Page
10.Apr 11:55
$$$$
M
M
M
M
M
10.Apr 11:55
Programming
4 20310997en_ba_a0
Safety advice
Read this operating instructions booklet carefully and keep it in a safe place. Please make
a thorough study of the safety advice presented here. Not following these guidelines may
be hazardous and may violate existing laws.
Medical devices
Your telephone should not be used near pacemakers, hearing aids or other
personal medical devices of this type.
Availability of service
The base network is not always available. Do not depend on a mobile phone as
your only means of communication in critical situations.
Ambient conditions
Only use your telephone in a temperature range from +5°C to approx. +40°C.
Avoid exposing it to direct sunlight and other heat sources. The handset is
splashwater-proof and dust-proof (IP 54).
Protect your telephone from aggressive liquids, and vapors.
Do not place your telephone near electromagnetic fields (electrical motors,
household appliances). The voice quality could be reduced. Avoid positioning it
close to computers, radios, TVs, video players and phones, in order to avoid
noise during a call .
Do not use your telephone in areas where there is a risk of explosions.
The version with explosion protection complies with requirements as per
Eex ib IIC T4.
Do not use your telephone in areas where blasting work is going on. Observe the
restrictions and follow the pertinent regulations.
Maintenance and repairs
Use original accessories only. Call on an expert to do installation and repairs.
Never touch the recharging contacts with optioned, metallic and/or greasy
objects.
Clean your telephone with a soft, slightly moist or antistatic cloth. Do not use
cleaning solvents or other chemical substances.
20310997en_ba_a0 5
English
Safety advice
Important information
There is a constant code exchange between radio base and handset to ensure that no one
with another handset can telephone at your expense. If the codes do not match, the call
is disconnected or no connection is established.
Locking the keypad
Your handset can be locked to prevent the accidental activation of keys. You can still
receive calls using the Call key. The keypad must be unlocked before outgoing calls can be
made.
Changing the code/password
When the handset is turned on for the first time, the code/password is "0000". We
recommend that you immediately programme a personal code consisting of 2 to 10 digits
so the personal settings of your handset and the data stored in it are protected from
unauthorized use.
Battery
The handset is supplied with a rechargeable battery.
Do not immerse the battery in water or throw into a fire.
Use only the plug-in power supply delivered with the telephone for the charging base.
The battery must be charged for at least 1 hour without interruption before being
used for the first time.
Notes
The battery may become warm during charging: this is normal and perfectly safe.
It takes several days of use for the battery to reach its full capacity and thus the full
standby and calling time.
After a prolonged period of non-use as a result of a power shutoff (e.g. while you are on
holiday), the handset (i.e. the battery) should be recharged prior to being used again.
Please dispose of defective batteries correctly (they are not household refuse).
6 20310997en_ba_a0
Installation and putting into service
Contents of package, handset
The following items are included with your telephone in the package:
Handset
Clip
Battery
Operating instructions booklet
Contents of package, charging base
Plug-in power supply
Charging base
Connecting the headset
Connecting the plug-in power supply
Feed the cord through the channel, placing it under the tabs so it cannot be pulled out.
Bedienungsanleitung
Mode d'emploi
Istruzioni per l'uso
Operating instructions
20310997en_ba_a0 7
English
Installation and putting into service
Installing the battery
1. Hold the handset with the clip facing downwards and insert the battery.
2. Press the battery and handset firmly together (see Figure) and slide the two locks
outwards.
Charging the battery
The battery is delivered uncharged. To charge the battery, you must place the handset on
the charging base. If there is a second battery available, it can be charged without the
handset being in the charging base. In the meantime the other can be used to operate
the handset.
LED display on the charging base:
red = The battery is being charged
green = The battery is charged
One battery charge lasts for approx. 80 hours of standby or
for approx. 8 hours of talk time
Charging takes approx. 1 hour
unlocked locked
8 20310997en_ba_a0
Before you telephone for the first time
Setting the display language
The language spoken in the area is usually preset in your handset. If you prefer another
one, you can select among several different languages.
Press the M-key repeatedly in programming
mode until, "*Language" appears. (look for the
"*" symbol with a foreign language). Press the
Foxkey under "*Language". By pressing the
Foxkey under "¥" select the desired language.
Confirm the selected language by pressing the
Foxkey under "Ok". Press the C/End key to
return to the standby display.
Register the PBX system
You can register your handset for as many as 4 different PBX systems (A, B, C, D). So, you
can be reached on your handset even while you are at a branch of your company.
Press the M-key repeatedly in programming
mode until "System" appears. Then press Foxkey
under "System". "Auto" or the current system
(A, B, C, or D) will appear in the display.
Press the M-key. If "Register: A" and "Delete"
appear, the handset is registered with PBX system
"A" (this registration could be canceled by
pressing the Foxkey under "Delete").
Using the Foxkey under "¥", the handset can be
registered with another three PBX systems (B, C
or D). The display then changes to "Register: B (C
or D)" and "New". Pressing the Foxkey under
"New" and "Home" causes the handset to be
registered in system "B" (provided this is allowed
and the system is available).
System
*Lang ¥
M
Ok
C
M
¥
New Home
Delete
M
20310997en_ba_a0 9
English
Before you telephone for the first time
The handset can also be registered with a PBX
system from a different manufacturer by using
GAP (Generic Access Profile) and the required
"Authentication code.
Press the Foxkey under "New" and "GAP".
When "AC: _____" appears, enter the
authentication code and acknowledge by
pressing the Foxkey under "Ok".
GAP log-on, compatibility with other DECT products
Ascotel DECT supports all the basic telephony features as defined in the Generic Access
Profile (GAP) standard (end 1997 version). They include setting up and clearing down
outgoing and incoming calls, inquiry call, DTMF and */# procedures. In other words:
You can log on and use your DECT system terminal on a third-party PBX. The only
requirement to be able to use all the basic features defined in the GAP standard is that
they are fully implemented on the relevant PBX.
Third-party DECT handsets that comply with the GAP standard can also be logged on
to and used on your system. However, they will provide only the functionality limited
by the GAP standard and not the same quality of radio connection. In particular the
software for Mobility Management with handover/roaming is virtually fully dependent
on the handsets used and cannot be adapted 100% to your system.
Setting the PBX system
Press the M-key repeatedly in programming
mode until "System" appears. Then press Foxkey
under "System". "Auto" or the current system
(A, B, C, or D) will appear in the display.
Select the desired system or „Auto“ with the
Foxkey under "¥" and confirm by pressing "Ok".
(If more than one system is available, and "Auto"
is selected the handset automatically establishes
a connection with the system that offers the best
radio connection.)
Notes
With "Long Click 1" (min. 2 seconds) you can switch your handset over to the next
available PBX system (A, B, C or D). Provided the switchover is not set on "Auto",
manual switchover of the PBX system is compulsory to ensure that your handset is
ready to operate in the new PBX system.
"Long Click 2" is used to display the International Portable Equipment Identity (IPEI)
and PARK (Portable Access Right Key).
"Long Click 5" displays the software version number of the handset along with the
date.
¥Ok
M
System
Ok
New GAP
0
7 98
4 65
1 32
10 20310997en_ba_a0
Telephoning
Answering an incoming call
An incoming call is signalled on the handset.
If the handset is not in the charging base, simply
press the Call key to answer the call.
Or
The handset is in the charging base. The call can
be answered directly by lifting the handset (see
"How to program your telephone", "Direct
seizure").
Pick up a call
Under "Pick_up" the system offers you "Sub" (Subscriber), "Bell" (Central bell with
coded ringing) and "Page" (paging system).
To answer for instance a call directed to a terminal of a absent subscriber, press the M-key
repeatedly until "Pick_up" appears, press the Foxkey at this position and enter the
subscriber number of the called terminal.
During the call
During a call, you can use the M-key to execute other functions, for example, initiating an
enquiry call, muting the microphone ("Mic mute"), switching the volume on the receiver
from "Quiet" to "Loud" (or vice versa)
Press the M-key once or twice in order to execute
other functions.
Ending a call
A call is ended by pressing the Call key or by returning the handset to the charging base.
Of course, the party you are talking to can also end the call. The handset returns to idle
state shortly afterwards.
Adjusting the receiver volume during a call
The volume can be set on "loud" or "quiet" via the menu.
Press the M-key repeatedly until "Loud" appears.
Press the Foxkey under "Loud".
Note
The new selting is retained until changed back.
Quiet Loud
M
M
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ascom Ascotel Office 150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ascom Ascotel Office 150 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Ascom Ascotel Office 150

Ascom Ascotel Office 150 Gebruiksaanwijzing - Deutsch - 47 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info