748333
81
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
13.1.3.2. Editing a sequence
Once you have entered the desired notes you can fine-tune the sequence, either by
changing the notes you've stored in a step or by adding modulation to a step:
select the sequence you want to edit (A or B)
make certain that "play" is turned off and press record
turn the Rate/Swing encoder to "scrub" through the sequence.
The MicroFreak will play back all data stored in a step including modulation events you have
stored in the modulation tracks [p.77]. When you reach the end of the sequence, it cycles
back to the beginning.
If there is a step on which you want to change the stored data, select it with the encoder
and hold new notes to replace the ones that were previously stored in the step.
To erase the content stored in a step press the "Hold" icon; this inserts a rest in that step.
Note: When in step mode the active sequencer can also record notes and velocities you play
on an external keyboard into the MIDI In port.
Note: When in step mode, turning [Shift]+[Rate/Swing] allows you to change the length of the
sequence on the fly.
13.1.3.3. Real-time recording a sequence
Real-time recording is similar to recording on a loop pedal. In step recording, only the
Record icon is lit up. To record in real time, activate "play" and then press Record. When
the Record icon starts blinking the track is ready and waiting for you to play notes or knob
movements into it.
Note: When recording, notes will run continuously and record whatever you play replacing
what you have recorded in the previous loop. When recording modulation the sequencer
will run one cycle and then punch out (stop recording).
Real-time recording is very much a fun feature: you cannot make complicated edits, but
some editing is possible:
If during recording you press a note, it will overwrite the current recorded
content.
If you want to erase notes or modulation events in the sequence, press Hold
when recording is active at the moment these notes or events occur. They will be
replaced by silence, and you can fill them in during the next record cycle.
If your MicroFreak is connected to a computer running a DAW (a software sequencer) you
could prepare a complex sequence in the DAW, set the MicroFreak to Real-time recording
and press play on the DAW. It will take some experimentation to get this right, but it can be
done. At this point the Modulation tracks are still empty, so you can enhance the sequence
by recording knob movements on the modulation tracks.
Tip: When recording in real time the number of steps in a sequence becomes important;
more steps mean that you can record in a higher "resolution". You set the number of
steps in Utility>Preset>Seq length. Choosing a low recording rate helps to insert notes and
modulations with more precision.
Arturia - User Manual MicroFreak - The Sequencer 76
81

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Arturia MicroFreak bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Arturia MicroFreak in de taal/talen: Engels als bijlage per email.

De handleiding is 4,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info