632824
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
2
PARTS IDENTIFICATION
Open & Close
Safety-Lock Buttons
Lid Grip
Pressure
Control
Locking
Lid
Induction-Ready
Stainless Steel Bottom
Pressure Valve (A)
Washer (B)
Nut (C)
Pressure Control Assembly
Pressure Level SettingsSilicon Ring & Safety Vent
Cool-Touch
Handles
Float Valve
Pressure
Cooker Pot
1
2
Pressure Level Settings
=
Low Pressure
8.7 PSI
High Pressure
13.1 PSI
No Pressure
0 PSI
A
B
C
11
TROUBLESHOOTING
The Float Valve won’t rise when cooking with the pressure cooker.
It will take a few moments for pressure to build up and for the Float Valve to begin rising. If
after a few minutes of heating, the valve still isn’t rising, it could be due to one or more of the
following reasons:
1. The temperature may not be high enough. Increase the temperature of the heat source.
2. There isn’t enough liquid in the Pressure Cooker Pot. The amount of liquid in the pot
should at least be up to the “MIN. 1/3” marking inside the pot.
3. The Pressure Control is set to “ ” and therefore not building pressure. The Pressure
Control must be set to “1” or “2” in order to build pressure.
4. The Locking Lid is not properly locked in place. Ensure the lid is securely locked
onto the Pressure Cooker Pot.
5. The Float Valve is clogged with debris and needs to be cleaned. Using caution to avoid
escaping steam, set the Pressure Control to “ ” to quickly release the inside pressure.
Once the pressure has been released and the pressure cooker is completely cool, remove
the Locking Lid and clean the Float Valve of any debris. Without placing the Locking Lid
on the Pressure Cooker Pot, press the “CLOSE” button on the lid to test if the Float Valve
can move freely. Gently press on the back of the Float Valve beneath the Locking Lid to
ensure it rises up and down freely.
6. The Silicon Ring is damaged, not in place or the edge of the Pressure Cooker Pot is
damaged. If the ring or pot is damaged, DO NOT attempt to use the pressure cooker and
contact Aroma customer service at 1-800-276-6286, Monday to Friday 8:30AM-4:30PM
PST or via e-mail at CustomerService@AromaCo.com.
The Float Valve rises but no steam is emitting from the Pressure Valve
Stop heating the pressure cooker and allow it to cool completely. Once cool, check the
Pressure Valve and Float Valve to make sure they are clean and completely free of debris.
The Locking Lid cannot be unlocked and opened.
Check whether the Float Valve has fallen completely. If not, allow the pressure cooker to cool
further. NEVER force the Locking Lid off of the Pressure Cooker Pot and always use
caution to avoid escaping steam.
There is excessive steam coming from the rim of the Pressure Cooker Pot.
This can result from one or more of the following reasons:
1. The Locking Lid is not properly attached to the Pressure Cooker Pot. Check to make sure
the lid is properly locked in place.
2. The Pressure Cooker Pot is overfi lled with liquid and ingredients. Make sure the liquid and
all ingredients never exceed the “MAX. 2/3” marking inside the pot.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aroma APC-600S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aroma APC-600S in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info