702288
2
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
2
7. (Optional) Connect the open collector output to an external
signalling device or panel to have an independent fault
supervisory.
8. Connect the flat cable between the control panel (connector
J20) and the ATS7300 (connector CON1or CON2).
9. Connect the antenna to the GSM module
10. Insert the SIM module into the SIM socket (CON5).
11. Apply power to the control panel and the GSM module.
12. Check the field strength (FS LED). When required, move the
antenna in order to get the best signal.
DESCRIPTION OF THE ATS7300 (REF. TO FIGURE )
No. Description Function
1
GSM module Sony Ericsson GM47 GSM
module. Includes antenna
connection (MMCX
connector)
CON5 SIM socket. Holds GSM SIM
card.
CON3 Feature connector. Only for
factory use.
F1, Automatic fuse Used to protect the GSM
module against
shorts/reversed connections
on the battery input.
CON 1, BATT IN + Battery + connection
CON 1, BATT IN - Battery – connection
CON 1 NC Not connected
CON 1 OC Open collector (see fault
indicator output description
below).
CON 2/CON 4
(System connector)
Communicates between the
ATS7300 and the main
panel.
LEDs LED’s indicating status.
FAULT INDICATOR OUTPUT (REF. TO FIG. CON1 SYMBOL )
OC
Open collector state:
The open collector is controlled by the state of the battery fuse
(F1), presence of the battery and the presence of the GSM
network.
The open collector is low (active) if the battery is present, the
battery fuse is ok and the GSM network is detected.
This low state can sink current and is compared to + 12V. In case
of any error condition the output is high.
IMPORTANT:
After power up the open collector is always high for some time, this
is because the ATS7300 has not yet detected the GSM network.
The open collector has the same functionality as the line fault,
which is reported to the panel, except that the open collector is not
delayed.
Line fault reported to the panel is delayed with 1 minute.
LED'S
MI
The MI LED (green) displays the status of the communication
interface to the panel.
Table 1. MI LED status
LED Description
Duty
cycle
Rate
(+/- 10%)
100% - Power ON (in case none of the
cases below are valid)
0% - No Power or Power Failure
25% 1 sec Initialisation OK, waiting for
communication
50% 1 sec Everything OK, communication
running
75% 500 ms Hardware failure
50% 250 ms Failure in communication, waiting for
re-initialisation.
CS
The CS LED (Red) indicates status of the audio information
transmitted to the central station
Table 2. CS LED status
LED Description
Duty
cycle
Rate
(+/- 10%)
100% - Connected
0% - Off line
10% 1 sec Connecting
50% 1 sec Ringing present
FS
The FS LED (green) indicates the field strength or signal strength
found by the GSM module. The number of flashes indicates the
level. Between each set of flashes a pause of 1 second is inserted.
Table 3. FS LED status
LED Description
Off No field strength (no network
detected)
Blink (1 – 5) Field strength indication from poor
(1) to excellent (5)
On Power on, not connected to a
network
GSM
The GSM LED (green) indicates the status of the GSM module.
Table 4. GSM LED status
LED Description
Off No power or the module is in the off
state
Blink Power on, connected to a network
On Power on, not connected to a
network
The GSM module will signal a line fault to the control panel if the
GSM module does not detect the home network for 1 minute.
.Technical Specifications
Power supply
Via ribbon cable from control panel
Via CON1, BAT from backup battery
10 – 15 V
10 – 15 V
Current Consumption (at 13.8 V ± 5%)
MI Bus
GSM Offline
GSM Online
GSM Online Peak
20 mA
15 mA
110 mA
2A
Open collector output current (CON13, OC)
15 mA max. at 13.8 V.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aritech ATS7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aritech ATS7300 in de taal/talen: Nederlands, Engels, Frans, Italiaans, Spaans, Pools, Deens, Noors als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info