566471
46
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
Heat pump water heater – OPERATING AND MAINTENANCE INSTRUCTIONS
46
7.12 Anti-frost function
In any event, if the temperature of the water in the tank falls below 5 °C while the appliance is powered, the heating
element (1000 W) will be automatically activated to heat the water up to 16 °C.
7.13 Faults
As soon as a fault occurs, the appliance enters into the fault mode while the display emits flashing signals and
visualises the error code. The water heater will continue supplying hot water provided the fault affects only one of two
the heating units, by activating the heat pump or heating element.
If the fault involves the heat pump, the symbol "HP" will flash on the screen, while the heating element symbol will
flash if the fault involves this component. If both components are affected, both symbols will flash.
Error
code
Cause
Heating
element
operation
Heat pump
operation
What to do
E1
Heating occurs without any water in
the water tank
OFF OFF
Turn off the appliance. Verify the causes of the lack of water
(leakage, faulty hydraulic connections, etc.)
E2
Excessive temperature of the water
in the tank
OFF OFF
Turn the
appliance off then wait until the water temperature
decreases; if the problem persists, contact the technical assistance
service
E4 Sensor fault – heating element zone OFF OFF Check or replace the heating element zone sensors, if necessary
E5
Excessive
difference between the
temperatures of the heating
element zone sensors
OFF OFF Check or replace the sensors, if necessary
H2 Circuit in low pressure or fan fault ON OFF
Turn off the appliance
.
Check that the fan is not broken and that
the evaporator is not obstructed. Check whether the hot gas valve
functions properly and replace it if necessary. Check the
evaporator sensor.
H3 Compressor fault or gas leak ON OFF
Turn off the appliance. Check that the evaporator is not obstructed.
Verify whether the wirings and the compressor functions properly
and/or check for any refrigerant gas leakages. Check or replace
the evaporator sensor.
H4 Evaporator obstructed ON ON
Turn off the appliance. Check that the evaporator and the external
unit casing is not obstructed.
H5 Fan fault ON OFF
Turn off the appliance. Verify that there are no physical
impediments to the movement of fan blades, check the wiring of
connection with circuit boards. Check the evaporator sensor.
H6 Air sensor fault ON OFF
Check the proper co
nnection of the probe cable between the two
units, Verify whether the sensor is properly connected and
positioned, and replace it if necessary.
H7 Evaporator sensor fault ON OFF
Check the proper connection of the probe cable between the two
units, Verify whether the sensor is properly connected and
positioned, and replace it if necessary.
H8 Hot water sensor fault ON OFF
Verify whether the sensor is properly connected and positioned,
and replace it if necessary
H9 Active defrost fault ON
OFF
(if air
temperature
il below
5°C)
Check that the fan is not broken and that the evaporator is not
obstructed. Check whether the hot gas valve functions properly
and replace it if necessary. Check that the external unit casing is
not obstructed.
F1 PCB fault OFF OFF
Try turning the appliance off then on again and verify the operation
of the control boards, if necessary replace it.
F2
Excessive number of
ON/OFF
(RELEASE)
OFF OFF Temporarily disconnect the product mains and the batteries.
F3
Lack of communication betw
een the
PCB and interface
OFF OFF
Try turning the appliance off then on again and verify the operation
of the control boards or replace them, if necessary.
F4
Empty tank (EMPTY), impressed
current anode circuit open
OFF OFF
Verify whether there is any wat
er in the tank, check or replace the
impressed current anode, if necessary.
F5
Short
-
circuit on the impressed
current anode circuit
ON ON Check or replace the impressed current anode if necessary
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ariston NUOS 200 SPLIT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ariston NUOS 200 SPLIT in de taal/talen: Nederlands, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info