454563
13
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
11
U
K
wall to the ceiling with a pencil. It will help the
installation operations.
2.Apply the perforation diagram to the wall: The centre
vertical line printed on the perforation diagram must
correspond to the centre line drawn on the wall. In
addition, the lower edge of the perforation diagram
must correspond to the lower edge of the hood:
keeping mind that the lower part of the hood, once
installation is completed, must distance at least 50 cm
from the cooking surface in case of electric plates and
65 cm in case of gas rings or mixed tops.
3.Place the support bracket on the perforation diagram
making it coincide with the rectangle marked out. Mark
the two external holes and make the holes. Remove the
peroration diagram, insert two wall dowels and fix the
support bracket of the hood with two 5x45mm screws.
4.Hang up the suction unit.
5.Adjust the distance of the suction unit from the wall.
6.Adjust the horizontal setting of the suction unit.
7. Mark the hole for definitively fixing the suction unit
from inside the suction unit with a pencil.
8.Remove the suction unit from the bracket.
9.Make a hole at the marked point (Ø8mm - see
operation 7).
10.Insert 1 wall dowel.
11.Apply flue support bracket „G“ to the ceiling, using
the support bracket as a perforation diagram (the small
slot on the support must coincide with the line
previously traced on the wall – operation 1) and mark 2
holes with the pencil. Make the holes (Ø8mm) and
insert 2 dowels.
12.Fix the flue support bracket to the wall with two
5x45mm screws.
13.Connect the suction group to the lower bracket.
14. Definitively fix the suction unit to the wall
(COMPULSORY!!).
15.Position the hood on the suction unit (insert it
partially), connect the electricity, fix the hood to the
suction unit (from inside with 3 screws at the sides and
2 in front) after having completely inserted it into its
housing.
16.Connect the tube (tube and band for fixing not
supplied and must be purchased) for discharging the
fumes at the connection ring placed over the suction
motor unit.
The other end of the tube must be connected to a
fumes expulsion device towards the outside in the
case of using a suction version hood. If you want to
use a filtering hood, fix baffle F to flue support staff G
and connect the other end of the tube to the
connection ring placed on baffle F.
17.Connect the electricity.
18.Apply the flues and fix them with 2 screws (18a) to
flues support „G“ (18b).
19.Let the lower part of the flue slide to completely
cover the suction unit until it is inserted into the
apposite housing over the hood.
Mount the fats filter/s (and where envisaged, the fat
collecting panels) and check the perfect functioning of
the hood.
F
=
=
X
G
H
X
18b
4-13
1
12
G
8
18b
4-13
2
3
9
10
11
11
8
7
H
18a
18a
5
6
5
6
14
16
17
B
19
15
15
15
15
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ariston HZV 9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ariston HZV 9 in de taal/talen: Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 9,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info