47979
26
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
26
GB
Cleaning by Pyrolysis
SAFETY MEASURES
During pyrolysis, the temperature inside the oven
reaches 450° to 500°. These high temperatures are
needed for breaking down the residues inside the oven
(see above).
Your oven is therefore equipped with the following
safety devices:
The door automatically locks as soon as the tem-
perature reaches a certain level in order to prevent any
risk of injury by burning.
The power for the heating elements cuts off in case
an anomaly occurs.
Comments
1 - Despite the high interior temperature throughout the
pyrolysis operation, the exterior walls of the oven re-
main only slightly warm, due to:
Reinforced insulation of the cooking chamber,
A fan which circulates air to cool the walls.
2 - Looking through the oven window, you might see
particles that flare up during their destruction by pyroly-
sis upon contact with a heating element. This is merely
a phenomenon of combustion. It is perfectly nor-
mal and poses no risk.
PRECAUTIONS TO TAKE BEFORE PYROLYSIS
1 - Be sure to eliminate any large spills with a damp
sponge. We strongly advise against the use of deter-
gents or any other oven cleaning products.
2 - Remove all accessories. They are not designed to
resist the high temperatures of pyrolysis. Furthermore,
some of them might obstruct the circulation of heat on
the oven walls, thus harming the performance of the
operation. The accessories can easily be cleaned like
regular dishes, even in a dishwasher.
3 - Do not leave dish towels on the oven handle.
Important:
During pyrolysis, the surfaces may become hot. Keep
young children away.
How to start pyrolysis:
- Remove all accessories from the oven. Eliminate
large spills, in order to avoid any risk of producing
fumes or flames.
- Close the door.
- Set the Function Selector to
- Set the programme. You can choose between:
Immediate start: same procedure as for a cooking
operation,
Delayed start: same procedure as for a cooking
operation.
Pyrolysis usually takes about 75 minutes. It can last as
long as 75 to 100 minutes depending on how dirty the
oven is.
What happens during pyrolysis?
The indicator light comes on when pyrolysis starts:
either immediately, or
at the preset time if you have programmed a delayed
start.
The indicator light is off when pyrolysis starts. It
comes on when the temperature inside the oven
reaches a certain level. It is then impossible to open
the door.
What happens at the end of pyrolysis?
The indicator light goes off and stays off,
The indicator light goes off when the temperature
inside the oven has dropped sufficiently. It is then pos-
sible to open the door, with the Function Selector still on
.
Some white dust may remain on the bottom and walls of
the oven. Remove it with a damp sponge after the oven
has cooled completely.
If you wish to use the residual heat to start a cooking
operation, do not worry about the dustit is harmless.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ariston FD 771 P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ariston FD 771 P in de taal/talen: Nederlands, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info