47609
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
WASHING MACHINE
Use and Care & Installation Instruction
A1636S
A1636
A1436
A1235
Contents
Installation, 2-3
Unpacking, 2
Remove the transit fixings, 2
Levelling, 2
Water connections, 2
Drainage and electrical connections, 3
Technical details, 3
Washing machine description, 4-5
Control panel, 4
LEDs, 5
Starting and programmes, 6
Briefly: how to start a programme, 6
Programme table, 6
Personalisation, 7
Setting the temperature, 7
Setting the spin speeds, 7
Functions, 7
Detergents and laundry, 8
Detergent dispenser, 8
Preparing your laundry, 8
Special items, 8
Precautions and advice, 9
General safety, 9
Disposal, 9
Saving energy and respecting the environment, 9
Care and maintenance, 10
Cutting off the water or electricity supply, 10
Cleaning your appliance, 10
Cleaning the detergent dispenser, 10
Caring for your appliance door and drum, 10
Checking the water inlet hose, 10
Fuses, 10
Changing the plug, 10
Troubleshooting, 11
Service, 12
Before calling for assistance, 12
Register your purchase now, 12
1
Installation
2
! Keep this instruction manual in a safe place for
future reference. Should the appliance be sold,
transferred or moved, make sure the instruction
manual accompanies the washing machine to
inform the new owner as to its operation and
features.
! Read these instructions carefully: they contain vital
information on installation, use and safety.
Unpacking
1. Unpack the washing machine.
2. Check whether the washing machine has been
damaged during transport. If this is the case, do
not install it and contact your retailer.
Remove the transit fixings
Follow these instructions to remove the TWO transit
fixings.
IMPORTANT: Situated one either side of the rear
panel, both transit bolts (complete with spacers)
MUST be removed before use... Failure to do so
may cause damage to your machine!
1. Use a crosshead
screwdriver to remove the
plastic cover.
2. Unscrew the bolt using a
13mm spanner.
3. ST
OP when 3 threads can
be seen.
4. Hold, slide and pull to
remove.
! It is important the transit bolt
and spacer come out intact
(see pic).
For safety, replace both plastic covers over the
holes left by removing the two bolts.
! Packaging materials are not childrens toys.
Levelling
1. Install the washing machine on a flat sturdy floor,
without resting it up against walls, cabinets etc.
2. Compensate for any unevenness by tightening or
loosening the adjustable front feet. The angle of
inclination, measured according to the worktop
must not exceed 2˚.
Levelling your appliance correctly will provide it with
stability and avoid any vibrations, noise and shifting
during operation. If it is placed on a fitted or loose
carpet, adjust the feet in such a way as to allow
enough room for ventilation beneath the washing
machine.
Water connection
Connecting the water inlet hose.
Remember that this is a cold-fill machine.
! Check that seal is in place
inside the hose end cap.
Before making the water connections to gas
3
/4
thread, allow the water to run freely from the supply
tap until it is perfectly clear.
Screw the inlet end with the
blue cap onto the cold water
supply tap.
Turn the taps on and check for leaks:
tighten if necessary.
! Make sure there are no kinks or bends in the hose.
! The water pressure at the tap must be within the values
indicated in the Technical details table (next page).
! If the water inlet hose is not long enough, contact a
specialist store or an authorised serviceman.
! Always use new hoses.
! Check the water hose at least once a year, replace any
that are cracked as worn hoses could split under water
pressure.
Installation
3
Drainage connections
A. Connect the drain hose, without kinking it, to a
draining duct or a wall drain fixed at a height
between 65 and 100cm from the floor.
B. Alternatively, place it over the edge of a basin,
sink or tub, fastening the hose supplied to the tap.
The free end of the hose should not be under
water.
! We advise against the use of hose extensions. In
case of absolute need, the extension must have the
same diameter as the original hose and must not
exceed 150cm in length.
Electrical connections
Before plugging the appliance into the mains socket,
make sure that:
the socket is earthed and in compliance with the
applicable law.
the socket is able to sustain the appliances
maximum power load indicated in the Technical
Details table (on the right).
the supply voltage is included within the values
indicated in the Technical Details table (on the
right).
the socket is compatible with the washing
machines plug. If this is not the case, replace the
socket or the plug.
! The washing machine should not be installed in an
outdoor environment, not even when the area is
sheltered, because it may be very dangerous to
leave it exposed to rain and thunderstorms.
! When the washing machine is installed, the mains
socket must be within easy reach and should be
connected to a suitable electrical supply.
! Do not use extensions or multiple sockets.
! The power supply cable must never be bent or
dangerously compressed.
! The power supply cable must only be replaced by
an authorised serviceman.
WARNING! The company denies all liability if and
when these norms are not respected.
The first wash cycle
Once the appliance has been installed and before
you use it for the first time, run a wash cycle without
detergent and no laundry, setting the 90˚C
programme without a pre-wash cycle.
Models A1636S, A1636, A1436 and A1235
59.5cm wide
Dimensions 85cm high
60cm deep
Capacity from 1 to 6kg
Electric voltage 220/230 Volts 50Hz
connections maximum absorbed power 1700W
Water
maximum pressure 1 MPa (10 bar)
connections minimum pressure 0.05 MPa (0.5 bar)
drum capacity 53 litres
Spin Speed up to 1600 rpm - A1636S & A1636
up to 1400 rpm - A1436
up to 1200 rpm - A1235
Control programme 3
programmes temperature 60˚C
according to run with a load of 6 kg
IEC456
directive
This appliance is compliant with the
following European Community
Directives:
- 72/23/CEE of 19/02/73
(Low Voltage) and subsequent
amendments.
- 89/336/CEE of 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments.
Technical Details
A
B
Washing machine description
4
Control panel
Detergent dispenser:
To add detergent and fabric softener (see page 8).
Programme key:
To consult a straightforward chart of the different
programmes available. Pull the grey tab outwards to
open it.
LEDs:
To find out which wash cycle phase is under way.
If the Delay Timer function has been set, the time
left until the programme starts will be indicated (see
page 5).
SPIN SPEED knob:
To set the spin speed or exclude the spin cycle
completely (see page 7).
FUNCTION buttons:
To select the functions available.
The button corresponding to the function selected
will remain on.
TEMPERATURE knob:
To set the temperature or the cold wash cycle (see
page 7).
START/STOP button:
To turn the washing machine on and off.
START/RESET button:
To start the programme or cancel any incorrect
settings.
ON-OFF/DOOR LOCK Led:
To find out whether the washing machine is on and
if the appliance door can be opened (see page 5).
PROGRAMME knob:
To select the wash programmes.
The retractable control knob: press the centre of the
knob for it to pop out. The knob stays still during the
cycle.
Programme key
Detergent dispenser
SPIN SPEED
Knob
TEMPERATURE
Knob
START/RESET
Button
PROGRAMME
Knob
ON-OFF/DOOR LOCK
Led
START/STOP
Button
FUNCTION
Buttons
LEDs
Washing machine description
5
LEDs
ON-OFF/DOOR LOCK Led:
If this LED is on, the appliance door is locked to
prevent it from being opened accidentally; to avoid
any damage. Wait for the LED to flash before you
open the appliance door.
! The rapid flashing of the ON-OFF/DOOR LOCK
LED together with the flashing of at least one other
LED indicates there is an error. Call for Technical
Assistance.
The LEDs provide important information.
This is what they tell you:
Cycle phase under way:
During the wash cycle, the LEDs gradually illumi-
nate to indicate the cycle phase is under way:
Note: during draining, the LED corresponding to the
Spin cycle phase will be turned on.
Function buttons:
The FUNCTION BUTTONS also act like LEDs.
When a function is selected, the corresponding
button is illuminated.
If the function selected is incompatible with the
programme set, the button will flash and the function
will not be enabled.
If you set a function that is incompatible with
another function you selected previously, only the
last one selected will be enabled.
Additional feature - Models A1636 & A1436 only:
Your machine has a delay Timer function and there
is additional marking alongside the LEDs.
Delay set:
If the Delay Timer function has been enabled (see
page 7), once you have started the programme, the
LED corresponding to the delay set will begin to
flash:
As time passes, the remaining delay will be
displayed and the corresponding LED will flash:
Once the set delay is complete, the flashing LED
will turn off and the programme set will start.
Starting and Programmes
6
Type of fabric and
degree of soil
Cottons
Synthetics
Description of washing cycleProgrammes
Wash
Temperature
Detergent
Pre-
wash
Wash
Fabric
softener
Cycle length
(minutes)
Briefly: starting a programme
1. Switch the washing machine on by pressing
button , for at least 2 seconds. All the LEDs will
light up for a few seconds and the ON-OFF
/ DOOR LOCK LED will begin to flash.
2. Load your laundry into the washing machine and
shut the appliance door.
3. Set the PROGRAMME knob to the programme
required.
4. Set the wash temperature (see page 7).
5. Set the spin speed (see page 7).
6. Add the detergent and any fabric softener (see
page 8).
7. Start the programme by pressing the
START/RESET button for at least 2 seconds.
8. When the programme is finished, the
ON-OFF / DOOR LOCK LED will flash to indicate
that the appliance door can now be opened. Take
out your laundry and leave the appliance door
ajar to allow the drum to dry thoroughly. Turn the
washing machine off by pressing button .
Extremely soiled whites
(sheets, tablecloths, etc)
Extremely soiled whites
(sheets, tablecloths, etc)
1
90˚
60˚
30˚
2
90˚
155
137
105
80
72
40˚
3
4
5
●●
Heavily soiled fast
colours (baby linen, etc)
6 60˚ 90
●●
●●
●●
●●
●●
Pre-wash, wash cycle, rinse cycles,
intermediate and final spin cycles.
Wash cycle, rinse cycles, anti-crease
or delicate spin cycle.
Fast colours (all types of
slightly soiled garments)
6 40˚
75
●●
Wash cycle, rinse cycles, anti-crease
or delicate spin cycle.
Heavily soiled fast
colours (baby linen, etc)
7 50˚
84
●●
Wash cycle, rinse cycles, anti-crease
or delicate spin cycle.
Delicate colours (all types
of slightly soiled garments
8 40˚
70
●●
Wash cycle, rinse cycles, anti-crease
or delicate spin cycle.
Delicate colours (all types
of slightly soiled garments
9 30˚
36
●●
Wash cycle, rinse cycles and delicate
spin cycle.
Delicate
Wool
10 40˚ 38
●●
Wash cycle, rinse cycles, and delicate
spin cycle.
Very delicate fabrics
(curtains, silk, viscose, etc)
Rinse
Delicate rinse cycle
Spin cycle
Delicate spin cycle
Draining
11 30˚
54
34
29
15
11
2
●●
Wash cycle, rinse cycles, anti-crease
or draining cycle.
Rinse cycles and spin cycle.
Rinse cycles, anti-crease or draining.
Draining and heavy duty spin cycle.
Draining and delicate spin cycle.
Draining
Wash cycle, rinse cycles, intermediate
and final spin cycles.
Wash cycle, rinse cycles, intermediate
and final spin cycles.
Wash cycle, rinse cycles, intermediate
and final spin cycles.
Wash cycle, rinse cycles, intermediate
and final spin cycles.
Heavily soiled whites
and fast colours
Heavily soiled whites
and non-fast colours
Slightly soiled whites
and delicate colours
(shirts, jumpers, etc)
PARTIAL PROGRAMMES
Programme table
Notes
For the anti-crease function: see Easy Iron (next page). The information contained in the table is purely
indicative. All cycle length times are approximate.
Special programmes
Daily 30' (programme 9 for Synthetics) is designed to wash lightly soiled garments in a short amount of
time: it only lasts 30 minutes and allows you to save on both time and energy. By setting this programme (9
at 30˚C), you can wash different fabrics together (except for woollen and silk items), with a maximum load
of 3kg.
We recommend the use of liquid detergent.
Personalisation
7
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to cold wash ( ).
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes Maximum spin speed
Cotton 1600rpm - Model A1636 1400rpm - Model A1436 1200rpm - Model A1235
Synthetics 800rpm
Wool 600rpm
Silk no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol .
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below.
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
Comments
Enabled with
programmes
All
Delay Timer
Delays the start
of the wash by up
to 9 hours.
Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the START/RESET button, the
delay can only be decreased if you wish to modify it.
1, 2, 3, 5,
6, 7, 8.
Super Wash
Allows for an
impeccable wash,
visibly whiter
than a standard
Class A wash.
This function is incompatible with the RAPID function.
1, 2, 3, 5,
6, 7, 8.
Rapid
Cuts the duration
of the wash cycle
by 30%.
This function is incompatible with the SUPER WASH function.
All
programmes
except for 1,
2, 4, 9, 10
and Draining
Easy Iron
This option
reduces the
amount of
creasing on
fabrics, making
them easy to
iron.
When this function is set, programmes 6, 7, 8, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED will flash.
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
1, 2, 3, 4,
5, 6, 7, 8.
(Model
A1235 only)
Extra Rinse
Adds one extra
rinse cycle.
Remember - you will use more water than with a standard
cycle.
Detergents and laundry
8
Detergent dispenser
Good washing results also depend on the correct
dose of detergent: adding too much detergent won’t
necessarily make for a more efficient wash, and
may in fact cause a build up on the interior of your
appliance and even pollute the environment.
Open up the detergent
dispenser and pour in the
detergent and fabric
softener, as follows:
compartment 1: Detergent for pre-wash
(powder)
compartment 2: Detergent for the wash cycle
(powder or liquid)
Liquid detergent should only be poured
in immediately prior to the wash cycle start.
compartment 3: Additives (fabric softener, etc.)
The fabric softener should not overflow from the
grid.
! Do not use hand wash detergent because it may
form too much foam.
Preparing your laundry
Divide your laundry according to:
- the type of fabric/the symbol on the label.
- the colours: separate coloured garments from
whites.
Empty all pockets and check for loose buttons.
Do not exceed the weight limits stated below,
which refer to the weight when dry:
Sturdy fabrics: max 6kg
Synthetic fabrics: max 2.5kg
Delicate fabrics: max 2kg
Wool: max 1.5kg
How much does your laundry weigh?
1 sheet 400-500g
1 pillow case 150-200g
1 tablecloth 400-500g
1 bathrobe 900-1200g
1 towel 150-250g
Special items
Curtains: fold curtains and place them in a pillow
case or mesh bag. Wash them separately without
exceeding half the appliance load. use programme
11 which excludes the spin cycle automatically.
Quilted coats and windbreakers: if they are
padded with goose or duck down, they can be
machine-washed. Turn the garments inside out and
load a maximum of 2-3kg, repeating the rinse cycle
once or twice and using the delicate spin cycle.
Trainers: remove any mud. They can be washed
together with jeans and other tough garments, but
not with whites.
Wool: for best results, use a specific detergent,
taking care not to exceed a load of 1.5kg.
1
2
3
Precautions and advice
9
! The washing machine was designed and built in
compliance with the applicable international safety
regulations. The following information is provided for
your safety and should consequently be read
carefully.
General safety
This washing machine should only be used by
adults and in accordance with the instructions
provided in this manual.
Never touch the washing machine when barefoot
or with wet or damp hands or feet.
Do not pull on the power supply cable to unplug
the appliance from the electricity socket. Pull the
plug out.
Do not open the detergent dispenser while the
appliance is in operation.
Do not touch the drain water as it could reach
very high temperatures.
Never force the washing machine door: this could
damage the safety lock mechanism designed to
prevent any accidental opening.
In the event of a malfunction, do not under any
circumstances touch internal parts in order to
attempt repairs.
Always keep children well away from the
appliance while in operation.
The appliance door tends to get quite hot during
the wash cycle.
Should it have to be moved, proceed with the
help of two or three people and handle it with the
utmost care. Never try to do this alone, because
the appliance is very heavy.
Before loading your laundry into the washing
machine, make sure the drum is empty.
Disposal
Disposing of the packaging material:
observe local regulations, so the packaging can
be re-used.
Disposing of an old washing machine:
before scrapping your appliance, cut the power
supply cable and remove the appliance door.
Saving energy and respecting the
environment
Environmentally-friendly technology
If you only see a little water through your appliance
door, this is because thanks to the latest Ariston
technology, your washing machine only needs less
than half the amount of water to get the best results:
an objective reached to respect the environment.
Saving on detergent, water, energy and
time
To avoid wasting resources, the washing machine
should be used with a full load. A full load instead
of two half loads allows you to save up to 50% on
energy.
The pre-wash cycle is only necessary on
extremely soiled garments. Avoiding it will save
on detergent, time, water and between 5 and
15% energy.
Treating stains with a stain remover or leaving
them to soak before washing will cut down the
need to wash them at high temperatures.
A programme at 60˚C instead of 90˚C or one at
40˚C instead of 60˚C will save up to 50% on
energy.
Use the correct quantity of detergent, depending
on the water hardness, how soiled the garments
are and the amount of laundry you have, to avoid
wastage and to protect the environment: despite
being biodegradable, detergents do contain
ingredients that alter the natural balance of the
environment. In addition, avoid using fabric
softener as much as possible.
If you use your washing machine between late in
the afternoon and the early hours of the morning,
you will help reduce the electricity board’s peak
load. The Delay Timer option (see page 7) helps
to organise your wash cycles accordingly.
If your laundry has to be dried in a tumble dryer,
select a high spin speed. Having the least water
possible in your laundry will save you time and
energy in the drying process.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ariston A1636 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ariston A1636 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info