9
Basic Troubleshooting
If the front panel LED does not light up, check...
that the AC power cord is firmly plugged into the rear panel and wall outlet.
to make sure the speaker rear panel power switch is ON.
that the speaker is getting power from the wall outlet.
that the rear panel voltage selector is matched to the operating voltage.
the fuse in the AC IN on the rear panel. If the fuse needs to be replaced it
is extremely important to replace only with same fuse type and value.
If no sound output, check...
that the speaker is turned on (blue LED illuminated)
to make sure the right speaker is connected correctly to the left.
that the volume on the speaker front panel is not all the way down.
the volume level on the iPod or other audio source.
If bass output is low, check...
speaker wire polarity (verify that wires are going to same terminals on
both speakers)
that the speaker placement is not too close to a wall or other obstruction.
that the bass ports on the rear panels are not blocked by a rodent or jelly
sandwich.
If no output from right speaker, check...
that the speaker wire is properly connected from the left to right.
Check by removing the speaker wire from both terminals on each speaker
and reconnecting.
Support
If you have an issue that needs help to resolve, contact us by email at:
info@argonaudio.com
