V 11/15
7
7. TIMER mode
When the unit is on, press this button to set the timer to turn off the unit. T-OFF and H will light.
Within 5 seconds, press the + or – button to turn off the timer.
If you press the + or - button once, the timer will increase or decrease by 0.5 h. If you press the
+ or - button for 2 seconds, the time will change quickly. Release the button after the set time
required is reached. Then press the TIMER button to confirm. The T-OFF and H icons will turn
off.
When the unit is turned off, press this button to set the start time of the TIMER. T - ON and H
light. Within 5 seconds, press the + or - to adjust the ignition. Pressing the + or - button once, the
timer will increase or decrease by 0.5 h. Press the + or - button for 2 seconds, the time will
change quickly. Release the button after the set time required is reached. Then press the
TIMER button to confirm. The T-ON and H icons will turn off
Canceling set TIMER ON / OFF: If the timer is set, press the TIMER button once to see the
remaining time that was set. Within 5 seconds, press the TIMER again to cancel this function.
Note: the interval of the setting time is from 0.5 to 24 hours.
The interval between the two settings can not exceed 5 seconds, otherwise the remote control
will lose the settings.
Getting to know the button combination functions
Remote control button lock function
Press "+" and "-" simultaneously to enable or disable the remote control button LOCK function.
When this function is enabled, will appear on the remote control display. If you attempt to operate
the remote control, the LOCK icon will flash three times and no signal will be sent to the unit.
Switching temperature display
In OFF mode, press the "-" and "MODE" buttons simultaneously to switch from a temperature
display in °C to °F.