801741
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
Power 3 (G icon - 3 bars on in the display): the appliance work at the
maximum power level (2000W)
5. To distribute the air ow over a wider surface, press the swing
pushbutton: it start to swing from right to left and viceversa. To stop
the appliance in the desired position, simply press the oscillation
pushbutton again.
6. To turn off the product press On-Stand-by pushbutton: the display
will show a countdown fro about 30 seconds. After 30 seconds the
appliance will be in stand-by mode.
7. To completely turn off the product the main switch must be in “0”
position (off).
The product is equipped with adjustable thermostat by stopping the air
ow as soon as the desired ambient temperature is reached; hot air will
start to ow again when the ambient temperature drops. To select the
desired temperature press “+” or “-” pushbutton after set the power level
(minimum, medium or maximum). The set temperature will displayed on
the display.
The set temperature can be displayed in either °C or °F; to set the unit
of measurement of temperature turn on the product, push and keep
pushing “+” pushbutton until the unit of measurement will ashing on the
display. Push “+” pushbutton to select the desired unit of measurement;
wait a few seconds for the setting to be memorised.
To activate ECO function press ECO pushbutton. The ECO icon will
be displayed. This function will compare the target temperature with
the current ambient temperature and it will automatically select the
most appropriate heating power level to guarantee an optimum comfort
level while reducing the energy consumption. (Attention: this function is
available only if one power level 1, 2 or 3 is selected). When the ECO
function is on, ECO icon (A) is dispalyed and the appliance may switch
automatically to a lower or higher heating level even several time. The
corrisponding heating level is always shown on the display (G icon).
The appliance is equipped with 24 hours timer that allow to set the
automatic start or automatic off of the product. To set the automatic start:
when the product is in stand-by mode press TIMER pushbutton; TIMER
icon (F) and the time remaining before the appliance will be turned on
blink on the display. To adjust the timer press “+” or “-” pushbuttons then
wait a few seconds for the setting to be memorised. On display stand-by
icon and timer icon blinking indicating that the timer for auto on is set.
When the programmed time is reached, the appliance is turned on with
the setting used during the previous period of operation. Attention: when
the timer for auto start is setted do not turn off the product from the main
switch.
To set automatic off: when the product is on, press TIMER pushbutton;
the TIMER icon (F) and the time remaining before the appliace turn off
blink on the display. To adjust the timer press “+” or “-” pushbuttons then
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ardes AR4P11D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ardes AR4P11D in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 1.12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info