161369
13
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
E-11
English
Searching for radio stations: AM/FM
Before searching for stations, ensure that the T32 is in
the correct mode by pressing the
5
or
6
buttons on
the front panel (or
M
on the remote control) until AM’
or ‘FM’ is shown on the display.
ere are two methods to search for analogue (AM/FM)
stations:
< If you know the broadcast frequency of the station
you want, turn the Control knob on the front-
panel until the desired frequency is displayed. You
should then hear the required radio station.
< An alternative search method is to press and hold
the
D
or
E
keys on the remote control. Aer a
delay of one second, the T32 begins scanning for
the next available station. On nding a station
with a strong enough signal, the T32 stops
scanning, plays the station and displays the station
details.
If no stations can be received, then your aerial is not
providing an adequate signal. Contact your Arcam
dealer for further information or advice.
RDS
Radio Data System (RDS;
or RBDS in the USA) is a
communications protocol
for sending small packets
of digital information over FM radio broadcasts. RDS
standardises several types of information transmitted,
including station identication.
To toggle this function on or o, press
MENU and
navigate to FM Setup:
FM Setup
RDS Text Enabled
Use the control knob (or
D
and
E
on the remote
control) to toggle between ‘RDS Text Enabled’ and
RDS Text Disabled.
Note that not all stations broadcast RDS information.
Switching to mono
In some weak signal areas it can be benecial to force
the FM tuner to monaural output, as mono requires
a much lower signal strength to produce acceptable
results.
Press
MENU and navigate to ‘FM Mode, then turn the
Control knob (or
D
or
E
on the remote control) until
Monois displayed.
FM Mode
Mono
If the signal strength in your area is adequate, leave this
set to Stereo.
Note that AM broadcasts are only available in mono output.
Searching for radio stations: DAB
(if tted)
When using the DAB tuner section for the rst time,
you should perform a search to nd the available
services in your area. You may also wish to repeat the
search periodically to discover if any new ensembles (i.e.
groups of services) have gone on air, or if you move the
tuner to a dierent broadcasting region.
e rst time you enter DAB mode, the T32
automatically prompts you to scan for stations. To
manually initiate a re-scan, press
U
and select:
DAB Setup
Scan for stations?
To begin the search, press OK on the front panel or
remote control. e current search frequency is shown
on the display as the search progresses.
A complete search may take three minutes or so to
complete. You cannot cancel a search once started.
If no service is found aer the search, then either your
aerial is inadequate or you may be outside of the area
covered by DAB broadcasts. Contact your Arcam dealer
for further information or advice.
Selecting a service
Turn the Control knob (or press
D
or
E
on the remote
control) to cycle through the available stations and
choose the one you wish to listen to. Press
O
on the
remote control or OK on the front panel within the time-
out period to output the selected station.
Once you have set up your favourite DAB stations as
presets (see page 13), you may also retrieve them quickly
from numbered presets.
Deleting services
Under normal circumstances, you should not need to
delete services from the T32. If you move to a dierent
broadcasting region, however, or if a station ceases
transmission, stations may be shown as available that
can no longer be received.
Individual stations cannot be deleted. To remove
stations from the selection list that can no longer be
received, rst press the
U
button. Turn the navigation
control wheel until the display shows:
DAB Setup
Erase station list?
Press
O
on the remote control or OK on the front panel
to delete all services.
A delete operation should always be followed by a search
for available stations (as described previously) otherwise
no DAB radio stations will be available for selection.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Arcam fmj t32 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Arcam fmj t32 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info