8
1. If the base unit is located in the stand on the floor cleaner, push the unlatching button upwards
in order to release the locking mechanism. Remove the base unit from the stand.
2. Insert the adapter onto the appliance’s steam outlet nozzle. You must hear it click into place.
3. Select an attachment (see above) and insert it onto the adapter until it stops. When attached,
the flexed end piece of the appliance (with the exception of the spatula attachment) must point
to the left when the base unit is held with the water tank facing you.
4. Turn the attachment 90 degrees.
5. To remove an attachment from the adapter, turn it back 90 degrees and then pull it off.
6. If you want to remove the adapter from the base unit, press on the adapter’s unlatching lever
and remove it from the base unit.
7. Move the on/off switch on the back of the appliance. The indicator lamp on the front of the
appliance lights up and the appliance heats up.
8. When the appliance has reached its operating temperature, steam is emitted by pressing the
handle of the steam activator. You can now start cleaning.
9. Slowly move the attachment backwards and forwards over the surface to be cleaned and
press the steam activator as required. Hold the attachment for approximately 10 seconds over
areas which need to be cleaned especially thoroughly.
10. When the water tank is empty and steam is no longer being produced, switch the appliance
off, pull the plug out of the plug socket and wait until the appliance has cooled down. Then
remove the water tank and refill it with water.
11. If the cleaning process has finished and the appliance has completely cooled down, remove
the water tank, empty it and let it dry.
12. Before using the appliance again, the water tank should always be checked for any residual
water and, if necessary, completely emptied.
CLEANING AND STORAGE
- Pull the plug out of the plug socket before cleaning.
- Only return the appliance to its storage place once it has fully cooled down and there is no
water left n the water tank.
- Never immerse the appliance in water and do not rinse it under running water.
- Do not use solvents or abrasive cleaning agents.
- The safety of the appliance can only be guaranteed when it is regularly checked for damage
and wear and tear.
- Do not use any corrosive or abrasive cleaning agents for cleaning. These could damage the
surface.
- When necessary, wipe the appliance with a damp cloth and possibly some mild cleaning agent.
- Remove dirt from the attachments (hairs, fluff etc.)
- The floor cleaning cloth can be washed in a washing machine at 60°C. Although the
microfiber cloth is able to endure the hot steam, you have to be careful with the plastic clasp
on the cord of the cleaning cloth. We therefore recommend to wash the microfiber cloth at
60°C. It is NOT, however, suitable for tumble drying.
- Do not put the appliance back in its place until it has completely cooled down and has been
emptied of water.
- Keep the appliance in a dry, clean and cool place which is inaccessible to children.
