137762
34
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
AD - 1100w
Safety Precautions
The lightning flash with an arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET, DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD
ATTEMPT THIS.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND
FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LAPRISE ET POUSSER JUSQU' AU FOUD.
CAUTION:
This Digital Video Disc Player employs a Laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Visible laser radiation when open and interlocks defeated.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
DO NOT STARE INTO BEAM.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location, or contact APEX Digital Inc. Only qualified service personnel should remove the cover.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant with the FCC Rules, Part
15. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the
instructions,may cause harmful interference to radio communication,However,this is no guarantee that interference will not occur
in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined
by turning the equipment off and on,the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance,(example-use only shielded interface cables when connecting to computer or
peripheral devices).Any changes or modifications not expressly approved by the party responsible for compliance could
void the users authority to operate this equipment.
WARNING: Changes or modifications made to this equipment, not expressly approved by APEX or parties authorized by APEX will void all the
manufacture warranties.
THE REGION CODE FOR THE UNIT IS 1.
Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have
region codes and disks can have an optional region code. If you load a disk of a different region code to your player, you
will see the region code notice on the screen. The disk will not play, and should be unloaded.
For Customer Use:
In spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No. Serial No.
Retain this information for future reference.
1
CLASS 1
LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
!
1
APEX DIGITAL
AD - 1100w
2
APEX DIGITAL
Safety Information
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Follow Instructions - All operating and use instructions should be followed.
3. Retain Instructions - The safety and operating instructions should be retained for future reference.
4. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near sources of water and moisture.
8. Accessories - Do not place this product on an unstable platform. The product may fall, causing serious personal injury and serious damage to the product. Use
only with a stable platform recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination
to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating.
These openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided. Never place this product near a heat source.
11. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
12. Grounding or Polarization - This product may be equipped with a polarized AC plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician. Do not defeat the safety purpose of the polarized plug.
Alternate Warning - This product may be equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature, If you are unable to insert the plug into the outlet, contact your electrician. Do not defeat the safety purpose
of the grounding-type plug.
13. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
14. Protective Attachment Plug - The product may be equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual
for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by
the manufacturer that has the same overload protection as the original plug.
15. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to
provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard
to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size or grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
18. Overloading - Do not overload wall outlets, extension cords as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
22. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is
in proper operating condition.
AD - 1100w
3
APEX DIGITAL
Introduction
Your new APEX Digital AD-1100W DVD player is designed for
you to enjoy all forms of disc media. Your player will allow you to
enjoy full-length motion pictures with "at-the-movies" picture and
cinema quality sound.
Your new player also supports CD, and MP3. Your player also
has several unique features, including an S-video output (for
greater picture clarity), Parental Control (to prevent children from
viewing inappropriate content), and Kodak Picture CD
compatibility (so you can show photos on your TV). This is a
truly multimedia machine designed for the multimedia world to
enjoy. The digital age has never been easier to enjoy than with
APEX Digital.
UNPACKING
First, inventory the contents of your DVD video player accessory package. It should have:
- Remote control (1)
- RCA cables (1 each in yellow, red, and white)
- AD-1100w Owners manual
- Size AA batteries (2)
If any item is damaged or missing, please inform your retailer immediately. Owner's manuals in other
languages are available at http://www.apexdigitalinc.com.
WHERE TO PLACE YOUR DVD PLAYER
You should place the unit on a firm, flat surface. It should not be too close to a VCR, stereo, or large speakers,
as the magnetic flux from these devices may cause distortion in the picture.
If placed in a cabinet, please allow at least 1 inch (2.5 cm) of free space all around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
The DVD video player is a precision device. If the optical pick-up lens and disc drive parts become dirty or worn
down, picture quality will become poor.To obtain a clear picture We recommend regular inspection and
maintenance every 1,000 hours of use (roughly 500 2-hour movies) depending on the operating environment.
AD - 1100w
TYPE OF TV SYSTEM
Connect this DVD video player to a TV compatible with the
NTSC or PAL/3.58 system.
Notes on Discs
HOW TO HANDLE, CLEAN, AND STORE DISCS.
HANDLING DISCS
• DO NOT TOUCH THE PLAYBACK SIDE OF THE DISC.
• DO NOT ATTACH PAPER OR TAPE TO DISCS.
NOTE: APEX DIGITAL INC. SHALL NOT BE RESPONSIBLE FOR DAMAGE
THAT MAY OCCUR TO A DISC FROM BEING OPERATED IN THE PLAYER.
CLEANING DISCS
• Fingerprints and dirt on the disc cause picture and sound deterioration.
Wipe the disc from the center outward with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dirt off, wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.
• Do not use any type of solvent such as paint thinner, benzene, commercially
available cleaners or anti-static spray for vinyl LP’s.
STORING DISCS
• Do not store discs in places subject to direct sunlight or near heat sources.
• Do not store discs in places subject to moisture and dust.
• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
PLAYABLE DISCS
This DVD video player can play back the following discs.
DVD
video
disc
Audio
+
Video
(moving
pictures)
Audio
Audio
12 cm
12 cm
8 cm
(CD single)
12 cm
Audio
CD
MP3
CD
MP3
Disk Mark Contains Disc Size Maximum playback time
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double sided disc)
Approx. 74 minutes
Approx. 20 minutes
Up to 10 hours
NOTES ON REGIONAL NUMBERS
DVDs are divided into separate regions. The United States
and Canada are designated as region 1 DVD. Your DVD video
player plays region 1 DVDs only. It will also play all region .
4
APEX DIGITAL
KODAK
Picture
CD
Spec. 12 cm
AD - 1100w
5
APEX DIGITAL
Table of Contents
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .2 - 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Notes On Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Identification of Controls . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting to a TV using a RF Modulator . . . . . .12 - 13
Connecting to Optional Equipment . . . . . . . . . . .14 - 15
What is MP3, and Picture CD ? . . . . . . . . . . . . . . . . .16
MP3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Playing Back a Disc . . . . . . . . . . . . . . . . . . . . . .18 - 21
Locating a Specific Title,
Chapter or Track . . . . . . . . . . . . . . . . . . . . . . . . .22 - 23
Playing Repeatedly . . . . . . . . . . . . . . . . . . . . . . . . . .24
Playing in Random Order . . . . . . . . . . . . . . . . . . . . . .25
Zooming a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Selecting the Camera Angle/Language/
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Playing in a Favorite Order . . . . . . . . . . . . . . . . . . . .28
Selecting Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Playing Back Your KODAK
Picture CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Working with Your JPEG Files:
What is a JPEG?/How to Create a JPEG/
Playing Your JPEG Files . . . . . . . . . . . . . . . . . . .31 - 32
Using the On-screen Display . . . . . . . . . . . . . . . . . . .33
Setting the Parental Lock . . . . . . . . . . . . . . . . . . . . . .34
Customizing the Function Settings . . . . . . . . . . . . . . .35
Memo On Output Sounds & PBC . . . . . . . . . . . . . . . .36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Trouble Shooting Guide . . . . . . . . . . . . . . . . . . . . . . .38
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
6
APEX DIGITAL
AD - 1100w
Identification of Controls
FRONT PANEL
REAR PANEL
1
4
3
1 POWER ON/OFF
2 DVD TRAY
3 OPEN/CLOSE
4 PLAY
5 PAUSE
6STOP
7 PREVIOUS
8 NEXT
9 REMOTE SENSOR
10 DVD LAMP
11 CD LAMP
12 PICTURE CD LAMP
1
2
3
4
5
6
1 DIGITAL AUDIO-COAXIAL OUTPUT
2 S-VIDEO OUTPUT
3 COMPOSITE VIDEO OUTPUT 1
4 COMPOSITE VIDEO OUTPUT 2
5 ANALOG AUDIO OUTPUT L
6 ANALOG AUDIO OUTPUT R
7 AC CORD
2
7
5
6 8 9 10 11
12
7
7
APEX DIGITALAD - 1100w
18. MENU
19. GOTO
20. MUTE
21. FORWARD
22. FORWARD SKIP
23. PAUSE/STEP
24. SHUFFLE
25. ANGLE
26. PROGRAM
27. DIRECTION KEYS
Remote Control
1. POWER
2. NUMBER KEYS
3. SHIFT
4. VOLUME
5. TITLE
6. SUBTITLE
7. AUDIO
8. PREVIOUS SKIP
9. REWIND
10. PLAY/ENTER/STOP
11. ZOOM
12. REPEAT
13. SLOW
14. DISPLAY
15. OPEN/CLOSE
16. SETUP
17. VOLUME +
THE INSTRUCTIONS IN THIS MANUAL DESCRIBE
THE FUNCTIONS ON THE REMOTE CONTROL.
7
4
14
2
24
17
21
19
8
5
15
13
18
23
16
NOTES:
POWER on the remote control is for “standby” power only. Turn the
main power button on the DVD player to operate the player.
SHIFT you must first press the Shift Key to operate the
Direction Keys.
MUTE button cuts out sound from the player.
MENU returns the player to the movie menu at the beginning of a disc.
VOL controls player volume through the TV.
3
6
9
10
11
12
22
1
20
When displayed the function is not operational.
26
25
PG. 7, 16
PGS. 17, 20-21
PG. 20
PG. 26
PG. 24
PGS. 18, 20, 28
PGS. 14, 15, 17, 18, 28
PGS. 14-19, 21-22, 25, 28, 30-31
PGS. 23, 28
PG. 22
PG. 19
PG. 29
PGS. 17
PG. 30-31
PG. 7 (See Below)
PG. 7 (See Below) 15, 28
PG. 7 (See Below)
PG. 21
PGS. 14-15, 17-18, 28
PGS. 18, 20, 22, 28
PGS. 15, 17, 18
PG. 22
PG. 24
PG. 25
PGS. 7 (See
Below), 14, 20-21,
23, 25, 30-31
(See Below)PG. 15, 17, 23, 28, 30
PG. 7 (See Below)
27
AD - 1100w
8
APEX DIGITAL
Remote Control
Continued
1 2 3
Open the cover.
OPERATING WITH THE REMOTE CONTROL
Operating video player with the remote control.
1
The remote control must point at the remote sensor in order for the
player to function correctly.
Distance: Maximum of 7 m from the front of the remote sensor.
Angle: Approximately 30º from each direction.
*Do not place the remote sensor towards any light source such as direct sunlight.
The DVD video player may malfunction.
Insert batteries (AA size).
Make sure to match the + and - on
the batteries to the marks inside the
battery compartment.
Close the cover.
BATTERIES
PREPARING THE REMOTE CONTROL
To operate the DVD video player, you must first place the batteries in the remote control.
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
• Do not place the batteries in the wrong direction.
• It is dangerous to charge/heat/open or short-circuit the batteries.
• Do not leave dead batteries or mix old/new batteries in the remote control.
• When not using the remote control for a long duration of time, remove the batteries.When operating range becomes reduced,
replace.
• If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace.
REMOTE CONTROL
• The remote control should be aimed directly towards the remote sensor of the DVD video player.
!
!
AD - 1100w
9
APEX DIGITAL
Connecting to a TV
• Turn off power and unplug both units before connecting.
• If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture will be
distorted because all dvd players incorporate copyright protection circuitry by Macrovision.
• If your TV only has a cable antenna connection and no video inputs to connect your TV to the DVD player, you will need to
purchase an RF Modulator from your dealer (see page 12 for further details).
CONNECTING YOUR APEX DIGITAL DVD PLAYER DIRECTLY TO YOUR TELEVISION
The following diagrams will show how to connect your DVD player to your TV.
For further instructions, please consult the owner's manual for your television.
RCA (Composite) Standard Connection
Red
White
Yellow
Red
White
Yellow
S-Video Connection
Red
White
Black
Red
White
Connect the DVD video player with an optional S-Video
cable if the TV has an S-video input. Do not connect the
yellow video cable if using the S-Video cable.
Black
TV Audio Input
TV Video Input
S-Video cord
(optional)
!
10
APEX DIGITAL AD - 1100w
Connecting to a TV using a RF Modulator
RF-Modulator
Your TV (Back)
VTo TV AntennaRL
UHF/Antenna IN
Coaxial
Your VCR (Back)
UHF/Antenna OUT
Coaxial
COAXIAL
VIDEO OUT
AUDIO OUT
L
R2
1
DVD (Back)
TV / Video Input
Conntection
TV /Audio Input
Conntection
(R)
(R)
(L)
(L)
(V)
(V)
Connection 1
Figure 1
Connecting the TV to the DVD
Note: All VCRs will distort the picture of a DVD
player. This is NOT a malfunction of the DVD player
or VCR. All DVD manufacturers are required to
install macrovision copyright circuitry to prevent
copying via VCR. This is what causes the distortion.
1) Connect the three-terminal composite video
cable to the back of your Apex DVD player. This
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into the
jack labeled "Front-L"; the
red prong will go into the jack labeled
"Front-R".
2) Connect the opposite end of the composite-video
cable into the back of the RF modulator. Make sure
to match up the colors correctly.
3) Connect a coaxial cable from the "Antenna Out"
jack on the back of your VCR to the "Antenna" jack
on the RF modulator. The coaxial cable is the one-
wire, metal-ended type that you screw onto the
VCR.
4) Connect a coaxial cable from the "To TV" jack on
the RF modulator to the jack on the back of your
TV.
5) Make sure your TV is set to the appropriate
Many older televisions do not have the newer component-video, S-video, or RCA connections that allow you to
optimize DVD technology. While it would be advised to purchase a newer television in order to take full advantage of
the digital quality of DVD’s, it is possible to connect an older television to a DVD player. This connection requires a
device called an RF modulator.
First, it is necessary to determine whether or not your TV needs a RF modulator. Look at the back of your TV. If you
see three input connectors lined up in a row, in the colors of yellow, red, and white, then you will not need an RF
modulator. If you see a connector labeled "S-video", then you will not need an RF modulator. If you do not have
either of these connectors, then you will need to purchase an RF modulator from a home electronics retailer.
Older televisions use a coaxial connection, which combines all of the video signal from an exterior source into a
single line. This line is then translated by your TV into the picture you see. The RF modulator combines the output
signals from the DVD player, or any other device, into the coaxial connection for use by your television.
Below are written and pictorial instructions on the proper way to connect an RF modulator to your Apex DVD player
and your TV.
channel before using your DVD player. In most cases,
this is channel 3 or 4.
11
APEX DIGITALAD - 1100w
Connecting to a TV using a RF Modulator
COAXI AL
VIDEO OUT
AUDIO OUT
L
R2
1
RF-Modulator
Your TV (Back)
(Back)
TV / Video Input
Conntection
TV /Audio Input
Conntection
VTo TV AntennaRL
(R)
(R)
(L)
(L)
(V)
To your Cable/Satelite connection
(V)
UHF/Antenna IN
Coaxial
Your Cable/Satelite Box
INOUT
IN
OUT
Your VCR (Back)
UHF/Antenna OUT
Coaxial
Continued
RF-Modulator
Your TV (Back)
VTo TV AntennaRL
To your Cable/Satelite connection
UHF/Antenna IN
Coaxial
Your Cable/Satelite Box
INOUT
COAXIAL
VIDEO OUT
AUDIO OUT
L
R2
1
DVD (Back)
TV / Video Input
Conntection
TV /Audio Input
Conntection
(R)
(R)
(L)
(L)
(V)
(V)
Figure 3
Connection 3
Connecting the TV , DVD, VCR, and Cable or Satellite
Box
1) Connect the three-terminal composite video cable to the back
of your Apex DVD player. This cable has three prongs, one each
in yellow, red, and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into the jack labeled
"Front-L"; the red prong will go into the jack labeled "Front-R".
2) Connect the opposite end of the composite-video cable into
the back of the RF modulator. Make sure to match up the colors
correctly.
3) Connect a coaxial cable from the "Antenna Out" jack on the
back of your cable or satellite receiver to the "Antenna In" jack on
the back of your VCR. The coaxial cable is the one-wire, metal-
ended type that you screw onto the VCR.
4) Connect a coaxial cable from the "Antenna Out" jack on the
back of your VCR to the "Antenna" jack on the RF modulator.
5) Connect a coaxial cable from the "To TV" jack on the RF
modulator to the jack on the back of your TV.
6) Make sure your TV is set to the appropriate channel before
using your DVD player. In most cases, this is channel 3 or 4. Also
make sure that the VCR is set to the appropriate channel, as
well. This selector is usually on the back of your VCR. Consult
your VCR manual for further information.
Figure 2
Connection 2
Connecting the TV to the DVD through
the Cable or Satellite Box
1) Connect the three-terminal composite video
cable to the back of your Apex DVD player. This
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into
the jack labeled "Front-L"; the red prong will go
into the jack labeled "Front-R".
2) Connect the opposite end of the composite-
video cable into the back of the RF modulator.
Make sure to match up the colors correctly.
3) Connect a coaxial cable from the "Antenna
Out" jack on the back of your Cable or Satellite
receiver to the "Antenna" jack on the RF
modulator. The coaxial cable is the one-wire,
metal-ended type that you screw onto the VCR.
4) Connect a coaxial cable from the "To TV" jack on the RF modulator
to the jack on the back of your TV.
5) Make sure your TV is set to the appropriate channel before using
your DVD player. In most cases, this is channel 3 or 4.
AD - 1100w
12
APEX DIGITAL
Enjoying Dolby Pro Logic Surround
Sound
Dolby Pro Logic Surround
Enjoy the dynamic realistic sound of Dolby Pro
Logic Surround by connecting an amplifier and
speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
Set "AUDIO OUTPUT" to "ANALOG" via the
setup menu.
Enjoying Digital Stereo Sound
Digital Stereo
Enjoy the dynamic sound of Digital Stereo by
connecting an amplifier equipped with a digital
audio input and speaker system (right and left
front speakers).
Set "AUDIO OUTPUT" to "SPDIF/PCM" via the
setup menu.
To VIDEO
OUT
To ANALOG
AUDIO OUT 2
Audio cable
Yellow
Connection
Example
To audio
input
Amplifier
equipped with
Dolby Pro
Logic Surround
To video
input
Front
speaker
(left)
Connect one or
two speakers. The
output sound from
the rear speakers
will be monaural
even if you
connect two rear
speakers.
Front
speaker
(right)
Center
speaker
Rear
speaker
To VIDEO
OUT
Yellow
Connection
Example
To digital
audio input
Amplifier equipped
with digital audio input
To video
input
Front
speaker
(left)
Front
speaker
(right)
Coaxial cable
To PCM/BITSTREAM
TV
TV
• Refer to the manual of the connected audio receiver.
• Turn off power and unplug both units before connecting.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable
listening level to avoid speaker damage.
Connecting to Optional Equipment
WARNING
Do not set "AUDIO OUTPUT" to "SPDIF/RAW" via the SETUP MENU display, unless connecting (the
PCM/BITSTREAM jack) a receiver that has Dolby Digital/DTS decoding. Take precautions as excessive volume may
damage your speakers as well as your hearing.
(Optional)
!
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
13
APEX DIGITALAD - 1100w
• Do not connect the PCM/BITSTREAM jack of the DVD video player to the AC-3 RF input of a Dolby Digital receiver. Instead,
connect to the “DIGITAL” or “COAXIAL” input of a Dolby Digital/DTS receiver or Processor. The input of the A/V receiver is not
compatible with the PCM/BITSTREAM jack and is primarily for Laserdiscs only.
• Connect the PCM/BITSTREAM jack of the DVD video player to the "DIGITAL" or "COAXIAL" input of a Dolby Digital/DTS receiver
or Processor.
• Refer to the manual of the connected TV.
Adjust the volume of your receiver to a comfortable listening level to avoid any speaker damage.
• When connecting any disconnecting the DVD video player, turn off the amplifier to avoid any speaker damage.
Enjoy Dolby Digital or DTS
Dolby Digital/DTS
Dolby Digital and DTS programming can deliver surround sound with
five discrete full range channels plus a sixth channel for a subwoofer.
You can enjoy your APEX Digital DVD player with a Dolby Digital or
DTS Digital Surround Sound System. All you need is to connect your
DVD player to a Dolby Digital/DTS receiver or a Dolby Digital Ready
receiver with an external decoder.
Connecting to Optional Equipment
To VIDEO OUT To PCM/BITSTREAM
(Optional)
• How to setup the sound output:
From the SETUP MENU display, select General Setup by pressing ENTER.
Use “down arrow” key, set the "AUDIO OUTPUT" to "SPDIF/RAW".
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works.
1992-1997 Dolby Laboratories, Inc. All rights
reserved.
c
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
It is forbidden by law to copy, broadcast, show, play in
public, or rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
Continued
!
AD - 1100w
14
APEX DIGITAL
WHAT IS PICTURE CD?
APEX Digital is the first company to offer, in a DVD player, the ability to playback most JPEG files including KODAK Picture CDs and view your
photos on a television in the comfort of your home from a CD-RW!
You can order a KODAK Picture CD simply by checking the box on the photofinishing envelope when you drop off a roll of film (35mm or
Advanced Photo System - APS color print film) at the time of processing. When your order is returned, you receive your prints, negatives and
full roll of pictures safely stored on a KODAK Picture CD. With your AD -1100w, each KODAK Picture CD brings you the ability share your
photos with your family, friends, and/or business associates. See page 15 for details.
What is MP3, Picture CD?
WHAT IS MP3?
MP3 refers to a new format of music files available for playback over the internet because of the popularity to download music from MP3
websites on to ones computer. APEX DIGITAL is the first company to offer in a home DVD player, the ability to playback CD-R discs
recorded with MP3 audio files.
PLAYING AN MP3 FORMAT
You can play an MP3 CD by different “PLAY MODES” such as:
- “FOLDER” (normal playback)
- “REPEAT ONE” (repeat playback on a song)
- “REPEAT FOLDER” (repeat playback on a specific folder)
- “SHUFFLE” (random playback)
PLAYING AN MP3 FORMAT
1. To pIay you must view through your television. Insert an MP3 CD, the DVD video player will initialize
the disc when the tray is closed and the directory (folder) will be shown in an MP3 MENU on screen.
2. Press twice to select and highlight the PLAY MODE.
Then press each way to select play mode options (repeat, shuffle, etc.)
Then press twice then the “down” key to select and highlight an MP3 file (song).
Press ENTER to highlight your list of songs. Press “down” key to select and highlight.
3. Press ENTER to play the MP3 file. Press or during playback to skip the tracks. If you need
to return to the main directory (folder), press STOP.
AAAAAAAAAAA 1
BBBBBBBBBBB 2
CCCCCCCCCC 3
DDDDDDDDDD 4
EEEEEEEEEEE 5
FFFFFFFFFFF 6
YYYYYYYYYYY 1
SSSSSSSSSSS 2
TTTTTTTTTTT 3
VVVVVVVVVVV 4
ZZZZZZZZZZZ 5
UUUUUUUUUUU 6
MP3
MP3
PLAY MODE: FOLDER
MENU
MP3
MP3
MP3
MP3
MP3 Operation
• The upper left column is a list showing the name of the folder. The upper right column is a list showing the name of the song and the sub-folder.
• “ “ sign in front of a file name indicates that this is a folder, not a MP3 file.
• “MP3” sign in front of a file name indicates that this is a MP3 file.
• During MP3 playback, you cannot access to “PLAY MODE” folder or songs.
• You are allowed a maximum of 11 characters for each folder or song.
• For “SHUFFLE” playback, you are allowed playback randomly in a folder only.
!
15
APEX DIGITALAD - 1100w
NORMAL
When a KODAK Picture CD is inserted, an automated slide show is launched, Each picture in the current directory will
be displayed consecutively in a slide-show fashion and will be scaled to fit most of the TV screen. Twelve slideshow
transition modes are provided. Use “Resume” key to select: Customers can set “transition” effects for every
picture at any time during the slideshow.
mode 0: no special transition effect (by default)
mode 1: wipe from top to bottom
mode 2: wipe from bottom to top
mode 3: wipe from top/bottom to center
mode 4: wipe from center to top/bottom
mode 5: vertical blind
mode 6: wipe from left to right
Note: When you have completed viewing your photos, press stop, then
“Open/close” button to open tray. Select a disc number button (not in use) to
move the disc into position to be removed from tray, otherwise images will
remain on the screen indefinitely.
To display an image indefinitely, press the PAUSE key. To view the Next or Previous picture
press the NEXT or PREVIOUS keys. To resume the slideshow press the ENTER key.
There are four modes to transformation: “Invert”, “Mirror”, “Left”, and “Right”. These operations are allowed only
when a picture is being displayed normally, and will be cancelled automatically when a new picture is displayed. The
arrow key are used to select the different transformation modes:
Up -Invert/Normal
Down -Mirror/Normal
Left -Turn left
Right -Turn right
At the end of your picture slideshow, each image is reduced to a “thumbnail” sized display. To view your slideshow
presentation, again, press PREVIOUS button once. Important: Let the player complete it’s layout of 9 pictures
before pressing PREVIOUS button again to view the next nine. When at the beginning, press ENTER and your
presentation will begin.
The MENU key is used to display thumbnail pictures from the stop position. After it is enabled, up to nine scaled-
down thumbnails pictures will be displayed on the screen. The NEXT and PREVIOUS keys can be used to display
the NEXT and PREVIOUS nine pictures in the current directory.
mode 7: wipe from right to left
mode 8: wipe from left/right to center
mode 9: wipe from center to left/right
mode 10: wipe from edge to center
mode 11: horizontal blinds
mode 12: random
Playing Back Your KODAK Picture CD
IMAGE ROTATION
MENU
REPEATING THE SLIDESHOW
PREVIOUS
ENTER
NEXT
FAST REWIND
FAST FORWARD
PAUSE
STOP
MENU
• First you should press the SHIFT button,then use / OK to select.
DIRECTION KEYS
!
16
APEX DIGITAL AD - 1100w
Playing Back a Disc
1. Press the POWER button displayed on the front panel.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
Be sure the playback side is faced
down.
3. Place the disc on the disc tray.
4. Press the ENTER/PLAY button.
After closing the disc tray playback will start.
If the disc you want to playback is a DVD disc, the DVD
video player will start playback automatically. If the disc
you want to playback is a CD, press the PLAY button to
start playback.
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or DVD video player.
HOW TO PLAYBACK A DISC.
Basic Playback
(see page 11 -13 for connection details)
How to playback DVD video discs
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source that is connected to the DVD video player.
Set the AUDIO OUTPUT to DIGITAL OUTPUT OFF from the SETUP MENU display if you don’t have
the necessary equipment to enjoy Dolby Digital or DTS surround sound.
•Adisc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the DVD video player to
malfunction.
Do not force or place anything other than
5” DVD’s or CD’s on the disc tray.
The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.
POWER
!
!
!
17
APEX DIGITALAD - 1100w
Playing Back a Disc
Continued
ENTER/PLAY
PAUSE
STOP
FOR A HIGHER QUALITY PICTURE
DVD discs produce a high resolution picture. This may cause some picture artifacts
on the TV during playback. The artifacts will vary depending on the TV used with
the DVD video player. To control picture artifacts reduce the sharpness setting on
your TV when viewing DVD discs.
ABOUT DVD AND CD
DVD, CD icons will appear depending on the disc being played back.
DVD: DVD video discs
CD: Audio CDs
To FAST FORWARD/REVERSE press the FWD/REV arrow key on the remote
control.
HOW TO START PLAYBACK FROM THE MENU SCREEN
1. Press or the number buttons to select the title.
2. Press the OK button.
The DVD video player will start playback from the title selected.
Title 1
Title 3
Title 2
Title 4
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the PAUSE during playback.
Press the PAUSE or ENTER/PLAY
button to resume normal playback.
HOW TO STOP PLAYBACK
Press the STOP button.
The DVD video player is stopped.
Press the ENTER/PLAY button to
replay.
Press the STOP button twice.
HOW TO REMOVE THE DISC
Press the OPEN/CLOSE button.
Wait until the disc tray is completely open
before removing any discs.
After removing the discs, press the
OPEN/CLOSE button to close the
disc tray.
At the completion of each movie a menu screen will appear.
Be aware that the on-screen setup menu may damage your
TV by permanently burning that image onto the screen. To
avoid this, press the STOP button at the completion of each
movie. You may also decide to setup the SCREEN SAVER.
• First you should press the SHIFT button,then use
/ OK to select.
DIRECTION KEYS
!
AD - 1100w
18
APEX DIGITAL
Playing Back a Disc
Continued
PLAYING AT 2X, 4X, 6X OR 8X THE NORMAL SPEED
You can play back a disc at 2x, 4x, 6x or 8x the normal speed.
Press the REV or FWD button during playback.
The playback speed becomes 2x the normal speed.
The playback speed changes, each time you press the REV or FWD button.
REV: Fast reverse
FWD: Fast forward
• Audio CD
The reverse or forward playback alternates between 1x, 2x, 3x, 4x speed.
ADVANCED PLAYBACK
The DVD video player allows you to playback discs at various speeds.
STEP
PAUSE
REV
FWD
2X 4X 6X
8X
FF 2x FF 4x FF 6x FF 8x
2x the normal speed 4x the normal speed 6x the normal speed 8x the normal speed
PLAYING FRAME BY FRAME
Press the STEP button during playback.
The picture will advance one frame each time you press the
STEP button. Sound is muted
NOTICE
• The DVD video player will not playback sound and subtitles during scan reverse and forward playback of DVD video discs. The
DVD video player will play sound during fast forward or fast reverse playback of audio CDs.
• The speeds may vary slightly from disc to disc and are only approximate.
• MP3 CD does not utilize this feature.
• MP3 CD does not utilize this feature.
TO RESUME NORMAL PLAYBACK.
Press ENTER/PLAY.
TO RESUME NORMAL PLAYBACK.
Press ENTER/PLAY.
Frame by
Frame
Slow
Motion
Last
Play
TV SCREEN
ENTER/PLAY
PLAY
FR 2x FR 4x FR 6x FR 8x
2x the normal speed 4x the normal speed 6x the normal speed 8x the normal speed
PLAY
normal speed
normal speed
!
19
APEX DIGITALAD - 1100w
1/4 the normal speed
PLAYING IN SLOW-MOTION
A disc can also be played back in slow-motion.
Press the SLOW button during playback
The playback speed becomes 1/2, 1/4, or 1/8 of the normal speed
each time you press the SLOW button.
(Reverse slow play as the same.)
Playing Back a Disc
Continued
SF 2x SF 4x SF 8x
1/2 the normal speed
TV SCREEN (FORWARD)
TV SCREEN (REVERSE)
1/8 the normal speed
SR 2x SR 4x SR 8x PLAY
1/2 the normal speed 1/4 the normal speed 1/8 the normal speed normal speed
RESUMING PLAYBACK FROM THE SAME LOCATION
This DVD video player allows you to stop playback and
continue playback later from the same location on the disc.
1. Press the STOP button
This will interrupt the playback and the DVD video player will
memorizes the location where you stopped playback.
2. Press the ENTER/PLAY button
The DVD video player will resume the playback from the location
where you stopped playback.
NOTICE
• During the slow-motion playback, the sound is muted.
• MP3 CD/CDDA does not utilize this feature.
• The following actions will cancel the RESUME function:
- Unplugging the DVD video player after you stop playback.
- Ejecting the disc.
- Adjusting/changing the parental lock or selecting a different language setting.
• On occasion depending on the disc, you may experience a difference of location where playback resumes.
• MP3 CD and CD does not utilize this feature.
TO RESUME NORMAL PLAYBACK.
Press ENTER/PLAY.
2
1
SLOW
ENTER/PLAY
!
20
APEX DIGITAL AD - 1100w
This DVD video player allows you to locate consecutive chapters or tracks.
Press the SKIP or button repeatedly to display the requested chapter or track
SKIP
SKIP
The DVD video player starts playback from the selected chapter or track.
How to locate preceding chapters or tracks
When you press the SKIP button, the DVD video player starts playback from the beginning
of the preceding chapter or track.
How to locate succeeding chapters or tracks
• When you press the SKIP button, the DVD video player starts playback from the beginning of
the succeeding chapter or track.
Notice: On some discs the titles may not display the sub-divided chapters.
LOCATING A SPECIFIC CHAPTER OR TRACK
Locating a Specific Title, Chapter or Track
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Track 1 Track 2 Track 3 Track 4 Track 5
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE TITLES ARE SUB-DIVIDED INTO
CHAPTERS. MOREOVER, AUDIO CD and MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN
CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR TRACK WITH THIS DVD
VIDEO PLAYER.
TITLE 1
DVD Video Disc
TITLE 2
Audio CD
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD video disc contains a title menu.
TITLE
1. Press the TITLE button
On the TV screen, the title menu will appear.
2. Press the button to select the title
you want
You can also directly locate a specific title by pressing its assigned
number with the number buttons.
3. Press the OK button
This will cause the DVD video player to start playback from chapter 1 of the
title selected.
Title 1
Title 3
Title 2
Title 4
Example of a title menu.
• You may find that some discs will not respond to this function.
• If different instructions appear on the TV screen, follow those instructions. The instructions above are describing the basic
procedure where the procedures may vary depending on the contents of the DVD video disc.
• First you should press the SHIFT button,then use / OK to select.
!
21
APEX DIGITALAD - 1100w
Locating a Specific Title, Chapter or Track
Continued
To select title 18:
To select title 22:
3. Press ENTER/PLAY button.
LOCATING A TITLE
1. Press GOTO during playback.
Make sure that the space next to
TITLE is highlighted.
2. Press numbers to select the title and
chapter you want.
• By pressing / OK you may shift the highlights between the TITLE and CHAPTERS.
• To select the time, you can press the GOTO twice.
GOTO
e.g. To select title 2
+10+10
+10
8
2
2
TITLE: /02 CHAPTER: 03/03
02
If a DVD video disc contains title numbers, you can locate a specific title by directly selecting a title number.
NUMBER BUTTONS
GOTO
1
2 3
4
5 6
7
8 9
0
+10
ENTER/PLAY
• First you should press the SHIFT button,then use / OK to select.
DIRECTION KEYS
!
22
APEX DIGITAL AD - 1100w
Playing Repeatedly
1. Press the STOP button twice.
2. Press the SHUFFLE button during stop
3. Press the ENTER/PLAY button.
The DVD video player will now start random playback.
You must press the ENTER/PLAY button within 5 seconds after
you press the SHUFFLE button.
• The DVD video player will go to another
chapter or track and start playback if you
press the SKIP button during random
playback.
TO RESUME NORMAL PLAYBACK.
Press the STOP button, then press
SHUFFLE, at last press ENTER/PLAY.
Playing in Random Order
THIS DVD VIDEO PLAYER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR TRACKS IN RANDOM ORDER. (RANDOM
PLAYBACK)
SHUFFLE ON
STOP
SHIFT
ENTER/PLAY
SHUFFLE
THIS DVD VIDEO PLAYER ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR
SEGMENT REPEATEDLY. (TITLE REPEAT, CHAPTER/TRACK REPEAT, A-B REPEAT).
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1. Select the title, chapter, or track you want to repeat.
2. Press the REPEAT button.
The repeat mode changes, each time you press the REPEAT button.
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT OFF
Repeats the same chapter.
Repeats the same title.
Resumes normal playback.
DVD video disc
REPEAT
PLAYING TITLES IN RANDOM ORDER
This DVD video player will automatically choose the titles in a DVD video disc and play them back randomly.
!
!
23
APEX DIGITALAD - 1100w
ZOOMING A PICTURE
This DVD video player allows you to zoom into a picture as well as shift the zoom point.
Press ZOOM during normal playback or slow - motion.
The DVD video player magnifies in the center of the picture.
If you press during zoom playback, the zoom point shifts.
TO RESUME NORMAL PLAYBACK.
Press ZOOM during zoom playback.
ZOOM X 2
ZOOM X 4
ZOOM
Zooming a Picture
• First you should press the SHIFT button,then use / OK to select.
DIRECTION
KEYS
!
24
APEX DIGITAL AD - 1100w
Selecting the Camera Angles/ Language / Audio Settings
THIS DVD VIDEO PLAYER ALLOWS YOU TO SELECT FROM SEVERAL
DIFFERENT ANGLES AND LANGUAGES.
HOW TO CHANGE THE CAMERA ANGLE
Press the ANGLE button while playing back a scene recorded with
multiple angles.
• You may only press the ANGLE button when the angle icon
is flashing on the DVD display.
• Each time you press the ANGLE button, the
angle will change.
AUDIO
NOTICE
• The angle function will not work on DVD video discs that do not contain recorded multiple angles.
• During still playback, you are able to change the camera angle. However, when you resume to normal playback, the camera angle
changes to the new settings.
• The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles.
HOW TO SELECT A PLAYBACK AUDIO SETTING
This DVD video player allows you to select a preferred language and sound recording system
from those included on the DVD video disc.
1. Press the AUDIO button during playback.
• The player returns to the initial default settings, when you turn on the DVD video player or replace a disc.
• The DVD video player plays the prior sound programmed on the disc, when you select a format which is not included on the disc.
AUDIO - 2/3 : AC - 3 5.1 FRENCH
AUDIO - 3/3 : AC - 3 5.1 SPANISH
AUDIO - 1/3 : AC - 3 5.1 ENGLISH
AUDIO - 1/3 : AC - 3 5.1 ENGLISH
Language
Dolby AC-3
Total Audio Channels
Current Audio Position
2. Press the AUDIO button again to
cycle backwards.
AUDIO
ANGLE 1 ANGLE 2
Selecting the camera angle
Selecting a language
Recording systems
This DVD video player uses the Dolby Digital, MPEG 2, PCM and DTS recording systems. It cannot playback DVD video discs
recorded in any other recorded format.
2/2
1/2
Good evening Bonsoir Buenas tardes
ANGLE
!
25
APEX DIGITALAD - 1100w
PROGRAM P 00: T00 C000
Playing in a Favorite Order
COMBINE YOUR FAVORITE TITLES, CHAPTERS, OR TRACKS AND PLAY
THEM BACK IN ANY ORDER. PROGRAM UP TO 99 ITEMS INTO THE
MEMORY. (PROGRAM PLAYBACK)
The program playback function will automatically playback titles, chapters or
tracks in the order preprogrammed.
To CHANGE the programmed item:
Press the STOP button, then press
PROGRAM twice.
To CANCEL the programmed item:
Press the STOP button, then press
PROGRAM, at last press ENTER/PLAY.
3. After entering all chapter/title, Press the OK
button
The DVD video player starts memory playback.
1. Insert a disc, during normal
playback, press STOP twice,
then press the PROGRAM
button.
At this time, the menu will appear.
2. Using the numbered button, input
the number of the chapter/title you
want, then press ENTER, as such to
enter the next chapter/title in the order
you want them programmed in.
P01: T01 C004
PROGRAM
Memory 1
P02: T01 C009
PROGRAM
Memory 2
P03: T01 C001
PROGRAM
Memory 3
P04: T01 C003
PROGRAM
Memory 4
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER
• When the DVD video player is turned off, or if the discs are removed, the program item will be removed.
• Depending on the disc, the program playback may not function.
PROGRAM
Press to switch between the title and the
chapter.
• First you should press the SHIFT button,then use / OK to select.
DIRECTION
KEYS
!
26
APEX DIGITAL AD - 1100w
Selecting Subtitles
HOW TO DISPLAY SUBTITLES
You have the option to select a preferred subtitle
from those included on the DVD video disc.
Press the SUB-T button
during playback.
SUB-T
1/03
2/03
SUBTITLE 2
3/03
SUBTITLE 3
SUBTITLE OFF
To TURN OFF the subtitles.
SUBTITLE 1
Press the SUB-T during playback
until the subtitles disappears.
SUB-T
SUBTITLE OFF
• With some DVD’s, you may not be able to turn off the subtitles and they will appear on screen automatically.
As you press the SUB-T button, the subtitles may not appear immediately during some scenes.
• If the subtitles continue to show on your TV even after the DVD has been turned off, please refer to the TV’s close
caption settings.
SUB-T
THIS DVD VIDEO PLAYER ALLOWS YOU TO DISPLAY THE SUBTITLES
FROM THOSE INCLUDED ON THE DISC, ON TO YOUR TV SCREEN.
Good evening Bonsoir Buenas tardes
!
AD - 1100w
27
APEX DIGITAL
Working With Your JPEG Files
Section 1: What is a JPEG?
Section 2: How to Create a JPEG
Using your computer and a favorite computer software, you can create JPEG files capable of being played back on you TV
Screen.
1) Open your computer software.
2) Locate the file menu and choose Open
3) Depending on your software, you can:
- Open an existing file from your hard drive
- Open an existing file from a Disc
(such as a 3.5 floppy disc)
- Scan an Image into your work area
Note: If you do not have an existing file, locate the
file menu and choose New. This will open up a
blank document which you can work from.
4) Once your existing file is open or new file is created,
you can begin making modifications to your image.
5) When modifications are complete, locate your file menu
and choose Save or Save as.
Note: Other saving options might be Export,
Export to the Web, or Save a Copy As. Refer to
your computer software’s help menu or manual.
Once the file saving option is open, insert a file name in
the “File Name” text box. When choosing a file name, be
sure to choose a file name that you can recognize.
This will allow to you to easily select the files you want to
view on each CD. Underscores and numbers are optional
JPEG is short for the 'Joint Photographic Experts Group', a group of experts nominated to produce standards for
continuous tone image coding.
The best known standard from JPEG is IS 10918-1 (ITU-T T.81), which is the first of a multi-part set of standards for still
image compression. This allows you to create files (such as photographs, drawings, and most clip-art) that can be
archived on a CD-R for viewing on the AD-1100W, computer, or the web.
For more information about JPEG’s, please visit www.jpeg.org
and may be used in the file name as well.
Example:
- Johna_Guy_pic
- portfoliopic
- 2000flowchart
In the “Save as Type” drop down menu, select JPEG or
JPEG Interchange Format.
Note: Most computer software automatically defaults
to adding the .(dot) extension to the end of each file
name. It is often best if you add the .jpg extension
after each file name to insure universal readability.
Example:
- Johna_Guy_pic.jpg
- portfoliopic.jpg
- 2000flowchart.jpg
6) After your file name and file type are chosen, click on the
Save or Ok button to save you file as a JPEG.
7) To view your JPEG files on your TV screen, burn all your
files on a CD-R disc using your computer software. Be sure to
close” your CD-R session after making each CD.
Note: In order to create a CD (using a CD-R disc) you
will need CDRs, CD burning software, and a CD
burning computer drive. Check in the Computer
Department of your local computer store for more
information about CD-Rs, CD burning software, and
CD burning computer drives.
READABLE
AD - 1100w
28
APEX DIGITAL
There are four modes to rotate a picture: Invert, Mirror, Left, and Right. These operations are allowed only when a
picture is being displayed normally, and will be cancelled automatically when a new picture is displayed. The arrow
key are used to select the different rotation modes:
Up -Invert/Normal
Down -Mirror/Normal
Left -Turn left
Right -Turn right
This features allows you to view a picture at 25%-200% in several increments. Press the ZOOM button. An on
screen message (“Zoom On”) will verify your selection. Use Fast Forward and Fast Rewind keys to control the
amount of zoom in and out. Press the direction keys to move the picture in any direction. With Zoom Off, the picture
is scaled to fit most of your TV screen.
Note: When in the ZOOM mode, the slideshow transition and image transformation features are disabled.
The MENU key is used to display thumbnail pictures. From the stop position, press the MENU key. After it is
enabled, up to nine scaled-down thumbnail pictures will be displayed on the screen. The NEXT and PREVIOUS keys
can be used to display the NEXT and PREVIOUS nine pictures in the current directory. Each of the nine pictures are
numbered from 1-9. By pressing a number key, the corresponding picture will be enlarged to fill most of your TV
screen and the digest mode will be cancelled.
Working With Your JPEG Files
SECTION 3: PLAYING YOUR JPEG FILES
Normal Slide Show Presentation
When a JPEG disc is loaded into the player, a menu will appear on screen. From the Play
Mode shown on the menu, select the “FOLDER” option using your direction keys. Each
picture in the current directory will be displayed consecutively in a slideshow presentation.
Twelve slideshow “transition” modes are provided. Use ENTER key to select.
Note: From the playmode shown on the menu you may also select the “SINGLE” option to
view a picture indefinitely until NEXT, PREVIOUS, or ENTER key is selected.
mode 0: no special transition effect (by default)
mode 1: wipe from top to bottom
mode 2: wipe from bottom to top
mode 3: wipe from top/bottom to center
mode 4: wipe from center to top/bottom
mode 5: vertical blind
mode 6: wipe from left to right
mode 7: wipe from right to left
mode 8: wipe from left/right to center
mode 9: wipe from center to left/right
mode 10: wipe from edge to center
mode 11: horizontal blinds
mode 12: random
IMAGE ROTATION
MENU
ZOOM
• First you should press the SHIFT button,then use / OK to select.
READABLE
Continued
PREVIOUS
ENTER
NEXT
FAST REWIND
FAST FORWARD
PAUSE
STOP
MENU
DIRECTION KEYS
!
29
APEX DIGITALAD - 1100w
Total playing time of the
disc is displayed on the
DVD display.
Press DISPLAY during playback
TO TURN OFF THE ON-SCREEN
DISPLAY
Press DISPLAY Again.
Using the On-Screen Display
THE DVD VIDEO PLAYER ALLOWS YOU TO VIEW THE OPERATIONAL STATUS AND DISC
INFORMATION ON YOUR TV SCREEN.
TITLE ELAPSED
T01/12 C006/039 T00:17:01
CHAPTER ELAPSED
T01/12 C006/039 T00:00:16
CHAPTER REMAIN
T01/12 C006/039 T00:03:57
Current Title
Total Title
Current Chapter
Total Chapter
DISPLAY
TITLE REMAIN
T01/12 C006/039 T01:52:37
CHECKING THE OPERATIONAL STATUS
With this function you can view on your TV the
following:
-Current title
-Track number
-Total playing time
OFF
30
APEX DIGITAL AD - 1100w
1. Press STOP during playback
Press STOP once.
2. Press SETUP
The SETUP MENU appears on the TV screen.
3. Select PREFERENCE using down key
then press OK.
4. Select PARENTAL, press
5. Select ratings, press OK
6. Enter your password then press ENTER/PLAY
The pre-set password is 3308
7. Press SETUP to exit setup,
press ENTER/PLAY to start
TO CHANGE YOUR PASSWORD:
1. Follow step 4 to select password change.
2. Enter old password.
3. Enter new password.
4. Re-enter to confirm your new password.
5. Press ENTER.
6. Press SETUP.
- - - PREFERENCES PAGE - - -
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
SET PARENTAL CONTROL
Setting the Parental Lock
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD VIDEO
DISCS EQUIPPED WITH THE PARENTAL LOCK FEATURE.
SETTING THE PARENTAL LOCK
DVD video discs equipped with the parental lock function are rated according to
their content. The contents allowed by a parental lock level and the way a DVD
video disc can be controlled may vary from disc to disc. For example, if the disc
allows, you can edit out violent scenes unsuitable for children and replace them
with more suitable scenes, or lock out playback of the disc all together.
3, 4, 5
SETUP
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCES
EXIT SETUP
GOTO PREFERENCES PAGE
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
1. KID SAFE
2. G
3. PG
4. PG-13
5.
6. PG-R
7. NC-17
8. ADULT*
BYPASS
SETUP
PASSWORD VERIFY PAGE
INPUT PASSWORD:
T
STOP
3, 4, 5
STOP
• First you should press the SHIFT button,then use
/ OK to select.
!
31
APEX DIGITALAD - 1100w
- - SPEAKER SETUP PAGE - -
DOWNMIX
MAIN PAGE
LOUD SPEAKER SETUP
- - DOLBY DIGITAL SETUP - -
DUAL MONO
DYNAMIC
MAIN PAGE
DOLBY DIGITAL RELATED
1. Press SETUP.
2. Press to select
category (highlight), then press
OK.
3. Press SETUP to normal
playback.
--PREFERENCES PAGE--
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
SET PREFERENCES
T
- - GENERAL PAGE - -
TV DISPLAY
TV TYPE
ANGLE MARK
OSD LANG
AUDIO OUT
CAPTION
SCR SAVER
MAIN PAGE
GENERAL SETUP
THIS DVD VIDEO PLAYER ALLOWS YOU TO CUSTOMIZE THE
PERFORMANCE TO YOUR PERSONAL PREFERENCES.
DISPLAYING THE SETUP MENU SCREEN
The SETUP MENU screen asks you to select a setting category from General
Setup, Speaker Setup, Dolby Digital Setup, and Preferences. The selected
category will provide you the setting details on-screen.
ENTER/PLAY
SETUP MENU
GENERAL SETUP
SPEAKER SETUP
PREFERENCES
DOLBY
DIGITAL SETUP
SETUP
SETUP
Setup Current Status
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF*
ENGLISH*
CHINESE
FRENCH
SPANISH
JAPANESE
RESET
CHANGE
1. KID SAFE
2. G
3. PG
4. PG-13
5.
6. PG-R
7. NC-17
8. ADULT*
BYPASS
NORMAL/PS*
NORMAL/LB
WIDE
MULTI
NTSC*
PAL
STEREO*
L-MONO
R-MONO
MIX-MONO
Setup Current Status
ON*
OFF
ON
OFF*
• Preset password is 3308 .
• Highlighted function will be expanded at bottom of the screen.
•The SETUP MENU screen disappears if you press the SETUP
button while it is displayed.
• Functions and menu may change without notice.
* Factory defaults
** You must press STOP to set up PREFERENCES.
Customizing the Function Settings
T
Setup Current Status
Setup Current Status
ON*
OFF
ENGLISH*
CHINESE
LT/RT
STEREO*
ANALOG*
SPDIF/RAW
SPDIF/PCM
Setup Current Status
SETUP
*
FULL
6 / 8
4 / 8
2 / 8
OFF
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
• First you should press the SHIFT button,then use
/ OK to select.
DIRECTION KEYS
!
32
APEX DIGITAL AD - 1100w
Video output 1.0 V (p-p), 75 , negative sync., pin jack x 1
S video output (Y) 1.0 V (p-p), 75 negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75
Audio output (digital audio) 0.5 V (p-p), 75 , pin jack x 1
Audio output (analog audio) 2.0 V (rms), 10K , pin jack(L,R) x 1
OUTPUTS
Specifications
DVD VIDEO PLAYER/OUTPUTS/SUPPLIED ACCESSORIES
Power supply 120V AC 60 Hz
Power consumption 20VA
Mass 3.0 kg
External dimensions 320 x 81 x 320 mm (W/H/D)
Signal system MULTI/ NTSC/ PAL
Laser Semiconductor laser, wavelength 650 nm
DVD VIDEO PLAYER
Audio cable (red and white) 1 pair
Remote control 1
Batteries (AA) 2
Video cable (yellow) 1
User’s manual 1
SUPPLIED ACCESSORIES
DVD Video Discs CD MP3 CD
Sound recording
system
Audio setting on
the setting screen
ANALOG
AUDIO OUT jacks
DIGITAL
AUDIO OUT jack
Memo On Output Sounds & PBC
DISCS AND OUTPUT SOUNDS
Dolby Digital
SPDIF
/RAW
_____
Dolby
Digital
bitstream
SPDIF
/RAW
o
PCM
(48kHz)
PCM44.
1kHz
SPDIF
/RAW
SPDIF
/PCM
o
PCM
(44.1kHz)
MP3
SPDIF
/RAW
SPDIF
/PCM
o
PCM
(44.1kHz)
MPEG 2
SPDIF
/RAW
_____
MPEG 2
bitstream
SPDIF
/PCM
o
PCM
(48kHz)
Linear PCM
48kHz 96kHz
SPDIF
/RAW
SPDIF
/PCM
_____
PCM
(48kHz)
SPDIF
/RAW
o
PCM
(48kHz)
SPDIF
/PCM
o
_____
MP3 Audio Disc Play Back Capable MP3 audio disc can be played back by operating the unit in thesame way as the audio CD.
MPEG 1 AUDIO LAYER 3 DISC (MP3)
33
APEX DIGITALAD - 1100w
Trouble Shooting Guide
Check the following guide for a possible correction to a problem
before contacting customer service. Check FAQ at our website:
www.apexdigitalinc.com/
SYMPTOMS AND CORRECTION
Symptom
No power
No picture
No sound
Rolling b/w picture
Black & White
picture
The playback
picture has
occasional distortion
Brightness is
unstable or noises
are produced on
playback pictures
The DVD video
player does not start
playback
MP3 won’t read disc
or it skips
The remote control
does not work
properly
Correction
• Connect the power plug into the wall outlet securely.
• Verify the connection from the DVD video output to the TV video input. Then switch TV to
appropriate mode (video 1)
• Connect the video cable into the jacks securely. Refer to your television owners manual.
• Connect the audio cables into the jacks securely.
• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch
to the appropriate source on the receiver. Refer to your audio amplifier owners manual.
• Press the P/N button on your remote Control.
Adjust the vertical hold on your TV.
• Damaged S connector (bent pin)
A small amount of picture distortion may appear because of a poor quality video/sound transfer
to disc. This is especially true of some discs manufactured between 1997-1998..
• Scratched disc
• Connect the DVD player directly through the TV and not through any other source. What you’re
viewing is the effect of the copy protection circuitry required on all DVD players.
• If you don’t have a video input on your TV, you must purchase an RF adapter from your dealer.
• Place the disc with the graphics side up.
• Place the disc on the disc tray correctly inside the guide.
• Make sure the disc is free from scratches & fingerprints.
• Press the SETUP button to turn off the menu screen.
• Cancel the parental lock function or change the parental lock level. (The Pre-set password is
3308.)
• Turn the power off then disconnect the power plug and reinsert it back into the wall. Retry again.
• Use region 1 discs only.
• Reburn disc as the software edition used may not be compatible with the player. Check web
site for instruction.
• Use new editions of software such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or
NTI, Roxio’s Toast Titanium, etc.
• Make sure MP3 file are not encoded with a variable bit rate such as provided by Real Networks.
• Replace the batteries with new ones.
34
APEX DIGITAL AD - 1100w
Limited Warranty
PLAYERS
90 DAYS LABOR
ONE YEAR REPLACEMENT OF PARTS
WHO IS COVERED?
Proof of purchase is required to receive warranty service such as the original sales receipt showing original date
of purchase from an authorized APEX Digital, Inc. dealer in N. America. Keep your original box and packaging in
case your unit needs to be shipped to us. You will need to prepay shipping and APEX will pay the cost of shipping
the unit back to you.
WHAT IS COVERED?
Warranty repair from the original date of purchase: One (1) year replacement of parts; 90 days limited labor
warranty coverage.
If you don’t have proof of purchase, your unit will be considered out-of-warranty & will be charged at a flat labor rate.
WHAT IS EXCLUDED?
Your warranty does not cover:
- Labor charges for installation or setup of the product, adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the product.
- Product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not
within the control of Apex Digital, Inc.
- A product that requires modification or adaptation to enable it to operate in any country other than the country for
which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these
modifications.
- Incidental or consequential damages resulting from the product. (Some states do not allow the incidental or
consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to,
prerecorded material, whether copyrighted or not.)
BEFORE REQUESTING SERVICE:
Check your owner’s manual under “Troubleshooting Guide” and visit our website www.apexdigitalinc.com for
the latest updates under FAQ.
ORDERING ACCESSORIES:
You may purchase a remote control ($20 U.S. or $35 in Canada), owners manual ($7), and/ or firmware
upgrade, if applicable to your player ($10). Specify model number, name & address with a cashiers check made
out to Apex Digital.
MODEL # _____________________________ SERIAL # ____________________________
WHERE IS SERVICE AVAILABLE?
Please contact APEX DIGITAL, INC.
customer service: 2919 E. Philadelphia St., Ontario, CA 91761
(909) 930-1239 Monday-Friday 8:30am-5:00pm (California)
http://www.apexdigitalinc.com
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Apex ad 1100 wb bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Apex ad 1100 wb in de taal/talen: Engels als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info