424831
43
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
Ver. : 1.0
CONTENTS
CONTENTS
Safety Instruction ..............................................................................................................4
License................................................................................................................................5
Before Installation .............................................................................................................7
Features of anysee......................................................................................................................... 7
System Requirements ................................................................................................................... 8
anysee for System Requirement........................................................................................ 8
Contents of anysee Package.......................................................................................................... 9
Installation .......................................................................................................................10
Installation of anysee Software................................................................................................... 10
Installation on Windows XP ........................................................................................... 10
Windows XP Patch installation ...................................................................................... 15
Installation of anysee Driver....................................................................................................... 16
Windows XP Driver Installation..................................................................................... 16
Re-installing the Drivers (Driver Update) ...................................................................... 19
Re-installing the Drivers (Installation after Uninstallation)............................................ 25
Installation of another USB 2.0 port ............................................................................... 28
Checking the USB 2.0 Driver Installation ...................................................................... 30
Hardware Connections................................................................................................................ 31
How to use the anysee Application.................................................................................32
Start and Finish........................................................................................................................... 32
Screen Window........................................................................................................................... 34
Control Panel .............................................................................................................................. 36
Status Display ............................................................................................................................. 37
Video Window............................................................................................................................ 37
Mode........................................................................................................................................... 38
Scan Channel .............................................................................................................................. 38
Scan Channel / DIGITAL TV mode............................................................................... 39
Scan Channel / ANALOG TV mode .............................................................................. 41
Edit Channel / DIGITAL TV mode ............................................................................................ 43
Edit Channel / ANALOG TV mode ........................................................................................... 44
Capture ....................................................................................................................................... 45
Skins ........................................................................................................................................... 47
Options ....................................................................................................................................... 48
Time Shift................................................................................................................................... 49
Video setup................................................................................................................................. 50
Audio setup................................................................................................................................. 51
About .......................................................................................................................................... 51
2 / 82
CONTENTS
Functions .................................................................................................................................... 52
Digital TV....................................................................................................................... 52
Analog TV ...................................................................................................................... 52
S-video............................................................................................................................ 52
Video .............................................................................................................................. 52
Game Mode .................................................................................................................... 53
File .................................................................................................................................. 53
Recording........................................................................................................................ 54
Capturing the motion picture .......................................................................................... 55
Multi Screen Function (Simultaneously 9 Programs View) ........................................... 57
Teletext ........................................................................................................................... 58
Subtitle............................................................................................................................ 60
EPG (Electronic Program Guide) ................................................................................... 62
Favorite Channel List...................................................................................................... 64
Sleep Timer..................................................................................................................... 65
Zoom In .......................................................................................................................... 66
Various Aspect Ratio ...................................................................................................... 67
Picture Control................................................................................................................ 68
Time Shift....................................................................................................................... 69
Remote Control Unit................................................................................................................... 70
Remote Control Unit of Control Panel ........................................................................... 70
Remote Control Unit....................................................................................................... 71
Remote Control Unit Customer Configuration (Option). ............................................... 73
Keyboard Shortcuts .................................................................................................................... 74
Help ............................................................................................................................................ 75
Trouble Shooting .............................................................................................................76
Appendix ..........................................................................................................................80
Glossary...................................................................................................................................... 80
Product Warranty ...........................................................................................................82
3 / 82
SAFETY INSTRUCTION
Safety Instruction
Carefully follow the safety instructions below to prevent physical hazard or your property damage.
• Please use a soft cleaning cloth for cleaning.
• Do not install near the heating system to
prevent fire hazard.
• Do not put books or heavy objects on the
product.
• Please call a service center immediately if it
produces strange noise, burning smell or
smoke.
• Do not leave your product under the direct
sunlight or the rain.
• Do not attempt to disassemble, repair or
remodel.
• Do not place the product in the environment
of strong vibration or magnetism.
• Do not drop the product or inflict physical
impact.
4 / 82
LICENSE
License
SUPPLEMENTAL END USER LICENSE AGREEMENT FOR AMT SOFTWARE
("SUPPLEMENTAL EULA") (c)2005 AMT Co., Ltd All rights reserved.
________________________________________________________________________________
IMPORTANT : READ CAREFULLY - These AMT components, including any "online" or electronic
documentation are subject to the terms and conditions of the agreement under which you have licensed the
applicable AMT product ("AMT Product") described below (each an "End User License Agreement" or
"EULA") and the terms and conditions of this Supplemental EULA. BY INSTALLING, COPYING OR
OTHERWISE USING THE AMT COMPONENTS, YOU AGREE TO BE BOUND BY THE TERMS
AND CONDITIONS OF THE APPLICABLE AMT PRODUCT EULA AND THIS SUPPLEMENTAL
EULA. IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT INSTALL, COPY
OR USE THE AMT COMPONENTS.
NOTE : IF YOU DO NOT HAVE A VALID EULA FOR ANY "AMT PRODUCT" (INCLUDING,
WITHOUT LIMITATION) YOU ARE NOT AUTHORIZED TO INSTALL, COPY, OR OTHERWISE
USE THE AMT COMPONENTS AND YOU HAVE NO RIGHTS UNDER THIS SUPPLEMENTAL
EULA.
Capitalized terms used in this Supplemental EULA and not otherwise defined herein shall have the meanings
assigned to them in the applicable AMT Product EULA.
General. The AMT Components are provided to you to update, supplement, or replace existing functionality of
the applicable AMT Product. You are hereby granted a license by or on behalf of the entity which licensed
the AMT Product to you to use the AMT Components under the terms and conditions of the AMT Product
EULA for the applicable AMT Product (which are hereby incorporated by reference) and the terms and
conditions set forth in this Supplemental EULA, provided that you comply with all such terms and
conditions. To the extent that any terms in this Supplemental EULA conflict with terms in the applicable
AMT Product EULA, the terms of this Supplemental EULA control solely with respect to the AMT
Components.
Additional Rights and Limitations.
You may install and use one (1) copy of the AMT Components on each of your computers running validly
licensed copies of the applicable AMT Product, provided that you use such additional copies of such AMT
Components in accordance with the terms and conditions above. AMT retains all right, title and interest in
and to the AMT Components. All rights not expressly granted are reserved by AMT.
IF THE APPLICABLE AMT PRODUCT WAS LICENSED TO YOU BY AMT OR ANY OF ITS WHOLLY
OWNED SUBSIDIARIES (COLLECTIVELY, "AMT") OR A COMPUTER SYSTEM
MANUFACTURER, THE LIMITED WARRANTY (IF ANY) INCLUDED IN THE APPLICABLE AMT
PRODUCT EULA APPLIES TO THE AMT COMPONENTS PROVIDED THE AMT COMPONENTS
5 / 82
LICENSE
HAVE BEEN LICENSED BY YOU WITHIN THE TERM OF THE LIMITED WARRANTY IN THE
APPLICABLE AMT PRODUCT EULA. HOWEVER, THIS SUPPLEMENTAL EULA DOES NOT
EXTEND THE TIME PERIOD FOR WHICH THE LIMITED WARRANTY IS PROVIDED.
IF THE APPLICABLE AMT PRODUCT WAS LICENSED TO YOU BY AN ENTITY OTHER THAN AMT
OR A COMPUTER SYSTEM MANUFACTURER, AMT DISCLAIMS ALL WARRANTIES WITH
RESPECT TO THE AMT COMPONENTS AS FOLLOWS:
DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, AMT AND ITS SUPPLIERS PROVIDE TO YOU THE AMT COMPONENTS, AND ANY (IF
ANY) SUPPORT SERVICES RELATED TO THE AMT COMPONENTS ("SUPPORT SERVICES") AS
IS AND WITH ALL FAULTS; AND AMT AND ITS SUPPLIERS HEREBY DISCLAIM WITH
RESPECT TO THE AMT COMPONENTS AND SUPPORT SERVICES ALL WARRANTIES, DUTIES
AND CONDITIONS, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT
LIMITED TO, ANY (IF ANY) WARRANTIES OR CONDITIONS OF OR RELATED TO: TITLE, NON-
INFRINGEMENT, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
VIRUSES, ACCURACY OR COMPLETENESS OF RESPONSES, RESULTS, WORKMANLIKE
EFFORT, LACK OF NEGLIGENCE, QUIET ENJOYMENT, QUIET POSSESSION, AND
CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
PERFORMANCE OF THE AMT COMPONENTS AND ANY SUPPORT SERVICES REMAINS WITH
YOU.
EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL AMT OR ITS
SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES
FOR: LOSS OF PROFITS, LOSS OF CONFIDENTIAL OR OTHER INFORMATION, BUSINESS
INTERRUPTION, PERSONAL INJURY, LOSS OF PRIVACY, FAILURE TO MEET ANY DUTY
(INCLUDING OF GOOD FAITH OR OF REASONABLE CARE), NEGLIGENCE, AND ANY OTHER
PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED
TO THE USE OF OR INABILITY TO USE THE AMT COMPONENTS OR THE SUPPORT SERVICES,
OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE
UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS SUPPLEMENTAL EULA, EVEN IF
AMT OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LIMITATION OF LIABILITY AND REMEDIES. NOTWITHSTANDING ANY DAMAGES THAT YOU
MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL
DAMAGES REFERENCED ABOVE AND ALL DIRECT OR GENERAL DAMAGES), THE ENTIRE
LIABILITY OF AMT AND ANY OF ITS SUPPLIERS UNDER ANY PROVISION OF THIS
SUPPLEMENTAL EULA AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING
SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE
AMT COMPONENTS. THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS
SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY
REMEDY FAILS ITS ESSENTIAL PURPOSE.
6 / 82
BEFORE INSTALLATION
Before Installation
_______________________________________________________________________________
Features of anysee
anysee is a digital terrestrial USB TV Box with High speed USB 2.0 Interface. It provides High
Definition TV broadcast 40 times faster than the existing USB 1.1 product. It allows stable images
on the screen even when it is recording.
1) anysee is a compact digital terrestrial USB TV Box that can allow your Desktop or Laptop PC to
receive High Definition TV and Radio broadcast. (Maximum resolution: 1920 * 1080i).
2) anysee does not need extra power supply.
3) anysee supports real-time or scheduled recording function and can capture still images. You can
watch four to maximum nine channels on your screen..
4) anysee supports Teletext and Subtitle functions.
5) anysee provides EPG(Electronic Program Guide) and you can preset recording and manage the
files to be recorded into.
6) You can hold the screen while watching TV and can continue to watch from the paused section
after a while (Time-Shift function - Option).
7) You can zoom in to a part within the screen.
8) You can make your own list of favorite channels.
9) anysee is a portable and compact sized USB TV Box; 58mm width x 76mm length x 19mm.
height
10) anysee website(
http://www.anysee.com) provides up-to-date information and software
download service.
11) anysee is compatible with European remote control unit (RC-5 Type) – This is optional.
12) anysee has power supply management function. You can preset the time at which you want the
program and Windows OS to be turned off.
13) anysee employs SPDIF output and inside sound chip interface without a special audio amplifier
equipment.
14) You can select the screen size variably from the customized sizes, e.g., 16:9 and 4:3.
7 / 82
BEFORE INSTALLATION
System Requirements
anysee can be run in the following environment.
anysee for System Requirement
Laptop or Desktop PC supported with USB 2.0
OS : Windows XP Service pack 2
Memory : 256M or more
Microsoft Direct X 9.0 or above
CPU & VGA Card
In case with a VGA card supported to DxVA
Intel Pentium IV 1.0GHz or better
Centrino 1.0GHz or better
VGA Card
nVIDIA Series : GeForce4 MX440 or higher (Desktop)
GeForce FX 5200 Go or higher (Laptop)
ATI Series : RADEON 7500 or higher (Desktop)
Mob
ility RADEON 9200 or higher (Laptop)
In case without DxVA
Intel Pentium IV 1.6GHz or better
Centrino 1.0GHz or better
VGA Card : Very recent VGA cards ( Video RAM : 64MB or higher )
Graphic Card
Please download the latest driver below graphic card website for better quality and performance.
TI series graphic card :
www.ati.com
nVIDIA series graphic card : www.nvidia.com
Graphic card for Notebook / Laptop pc.
Please check your graphic card type in your notebook before using anysee product, and you
should check whether your notebook shares the main memory and graphic memory or not.
In the notebook pc, the main and graphic memory used to share together. In this case, the CPU
possession ratio will be increased remarkably or the pictures to be broken off or a blazing fire
may be caused by frame drop.
These products employ self-lowering of CPU clock to avoid extreme usage of CPU in order to
control internal heat generation. It may cause intermittent stops of screen or mismatch of lip-
sync due to considerable decrease of CPU performance.
DxVA Function
anysee product is suitable to the graphic card supported to DxVA function. In case of the
graphic card without DxVA function, the CPU possession ratio will be increased or the pictures
to be broken off may be caused by frame drop.
About Power
The computer has Power Control Mode. By choosing a power option, the system can be shifted
8 / 82
BEFORE INSTALLATION
to a power-saving mode when not in use or turned off at the time defined by system component
setting. If the Power Control Mode has been activated, intermittent screen stops may appear in
anysee products depending on the specifications of the PC.
Contents of anysee Package
anysee package consists on below. If you don’t have any below items, please contact to customer
support center.
9 / 82
SOFTWARE INSTALLATION
Click Install to start the software installation.
Click Next when the installation window appears.
11 / 82
SOFTWARE INSTALLATION
In case your Windows doesn’t have Service Pack 2: Direct X 9.0 will be installed automatically.
When the reboot message appears, click YES to reboot your windows and finish the installation.
( We recommend to reboot windows )
In case your Windows has Service Pack 2: Click Finish when the installation viewer wizard
complete window appears.
14 / 82
SOFTWARE INSTALLATION
Click Manual to view the electronic copy of the user manual.
Click Exit to close the installation main screen when the installation is complete.
.
Windows XP Patch installation
The computer without Windows XP service pack 1 will not be installed the patch file for USB.
Therefore, please install the Windows XP service pack 1 first then, install only patch file for USB.
( Please install Windows XP Hotfix –KB822603 file )
If you download the Service Pack 2 in the Microsoft Windows Update website, the Service Pack 1
is included. ( We recommend to install Windows Service Pack 2 )
In case illegal Windows XP, it will not be installed. We recommend purchasing legal Windows XP.
15 / 82
SOFTWARE INSTALLATION
Installation of anysee Driver
Windows XP Driver Installation
Please insert CD, plug USB 2.0 cable into your PC.
If you plug USB 2.0 cable into your Desktop or Laptop PC , The Found New Hardware Wizard will
appear. (Windows XP service pack 2 only)
Please check No, not this time then, click Next (Windows XP service pack 2 only)
16 / 82
SOFTWARE INSTALLATION
When the New Hardware Found Wizard window appears, select Install the software automatically
(Recommended) and click Next.
Click Continue Anyway when the Hardware Installation dialogue box appears.
17 / 82
SOFTWARE INSTALLATION
The window shown below will appear.
Click Finish to complete the driver installation.
18 / 82
SOFTWARE INSTALLATION
Re-installing the Drivers (Driver Update)
This section explains about reinstallation of anysee drivers. The latest drivers and software updates
can be found at
http://www.anysee.com.
For installation, download the driver from anysee homepage (
http://www.anysee.com).
Right-click on My Computer icon and select Properties. Select Device Manager in Hardware tab.
Select Sound, Video and Game Controller from Device Manager.
19 / 82
SOFTWARE INSTALLATION
Select anysee USB type Tuner (2005.04.25.0010313), right-click the mouse and and select Driver
Update (P).
Hardware Update Wizard window will appear.
20 / 82
SOFTWARE INSTALLATION
Select No, I don’t want to connect now and click Next button. (For Windows XP service Pack 2
only)
Select List or Installation at Specific Location (Advanced)(S) and click Next button.
21 / 82
SOFTWARE INSTALLATION
When a window showing Select a Search and Installation Option appears, select Search including
following location(O) from Search the most appropriate driver at this location(S).
Select Find(R) and find the folder to which the latest anysee driver was download into from
homepage and click OK.
22 / 82
SOFTWARE INSTALLATION
Click Continue button and start installation.
The installation of the driver progresses.
23 / 82
SOFTWARE INSTALLATION
Select Find(B) and find the folder to which the latest anysee driver was download into from
homepage and click OK.
Click Finish button to finish installation.
24 / 82
SOFTWARE INSTALLATION
Re-installing the Drivers (Installation after Uninstallation)
Right-click on My Computer icon and select Properties. Select Device Manager in Hardware tab.
Select
Sound, Video and Game Controller from Device Manager.
25 / 82
SOFTWARE INSTALLATION
Select anysee USB type Tuner (2005.04.25.0010313), right-click the mouse and select
Uninstallation(U).
Click
OK button when Device Uninstallation Confirmation window appears.
26 / 82
SOFTWARE INSTALLATION
Check if anysee USB type Tuner (2005.04.25.0010313) was uninstalled.
Select Search for change of hardware(A) at Action tab.
Move to “Windows XP Driver Installation” chapter and continue next installation.
27 / 82
SOFTWARE INSTALLATION
Installation of another USB 2.0 port
When a USB 2.0 port has been connected to another port, A new hardware was detected message
appears at the bottom right in Windows operation display line.
If no such message appears, disconnect the USB 2.0 cable and reconnect it shortly afterward.
Move to “Windows XP Driver Installation” chapter and continue next installation.
* A driver can be reinstalled either by driver update, uninstallation or use of another USB 2.0 port.
28 / 82
SOFTWARE INSTALLATION
Checking the anysee Driver Installation
Right-click on My Computer icon and select Properties. When System Registration Information
Window appears, select Device Manager in Hardware tab.
* Click : [Properties] > [Hardware] tab > [Hardware Manager] > Sound, video and game controllers
If driver is not installed, please install it again.
First, disconnect the USB 2.0 cable of anysee product and reconnect it again. When New Hardware
Search Wizard Window appears, Move to “Windows XP Driver Installation” chapter and continue
next step.
29 / 82
SOFTWARE INSTALLATION
Checking the USB 2.0 Driver Installation
Right-click the My Computer icon and select Properties. When System Registration Information
Window
appears, select Device Manager in Hardware tab.
* Check : [System Registration Information] [hardware] [Device Manager] USB Controller.
If the driver has not been installed, please check if the main board used supports USB 2.0.
30 / 82
SOFTWARE INSTALLATION
Hardware Connections
Connect anysee to your PC with a USB cable. If properly connected, the LED of anysee should light
up.
31 / 82
HOW TO USE THE ANYSEE APPLICATION
How to use the anysee Application
_______________________________________________________________________________
Please find out the software and the manual to be updated from anysee website
(
http://www.anysee.com).
If you have any problem, first check the FAQ menu at anysee website (http://www.anysee.com).
However, if you cannot find the solution there, please register your question using Technical
Request. Customer Service staffs will then respond with the solution.
Start and Finish
Click anysee icon on your Windows desktop screen or click in following sequence; [Start] on the
window bar Programs anysee anysee-E30. The anysee-E30 viewer will be opened showing
There is no channel window. Click OK button to display the Configuration window and click
Auto Scan button. It will start automatic channel scanning.
If you want to finish running the software, click the Finish button on the Skin (Control Panel) or
right-click and choose Finish
Start : Click anysee icon on your Windows desktop screen or click in following sequence; [Start] on
the window bar Programs anysee anysee-E50.
* when you start anysee, you can see quick configuration as below.
Please refer to explanation the “Video Setup” chapter .
3
2
1
Use [DxVA] : If your compter include DxVA function, you can check.
Set Video Size : If you don’t apply DxVA function, please select the video size as your CPU
performance. If you have low CPU performance, you choose the half size and if you have
high CPU performance select Full size.
32 / 82
HOW TO USE THE ANYSEE APPLICATION
It works well after installation, the windows will not show. If it works abnormally, please
remove the DxVA function.
OK : start anysee view
* After starting anysee view, you can see the message ‘No channel, Scan channel first’. Click the OK, it
appear the configuration window and please select Channel scan then press Auto Scan.
Exit : To finish the anysee program, press the Exit button on control panel or press the right
button in mouse on screen window and select Exit on Menu.
33 / 82
HOW TO USE THE ANYSEE APPLICATION
Screen Window
You can adjust the screen size. If you want to change the screen size, right-click on TV screen and
select Display Size menu. You may select the screen size from 4 choices.
You can watch the TV or file play in screen window. You can adjust window size using the mouse
on window edge.
On Screen window, you can show the Menu when press the mouse right button. You select Display
size and change the window size freely.
You move the mouse curse in screen window left side, you are able to show Channel List and move
the mouse curse in screen window right side, you can see the Favorite Channel List.
2
3
4
5
6
1
Screen window for TV or File play.
On Screen window, you can show the Menu when press the mouse right button.
View Controller : Displays the control panel always on top of the screen.
Hide Controller : Toggles between hiding and showing the controller.
Show EPG : Enables to view EPG(Electronic Program Guide) and to preset recording.
Display Size : Setting the Video size.( Custom, 16:9, 4:3, Normal size, Small size, Double size,
View Maximize Size, View Full Size, View Window Background)
Still Capture : Captures the momentary image of the screen
Mute : Mute On/Off
Sleep Timer : Enables to preset the time at which the program is to be terminated.
(10 minute, 20 minute, 30 minute, 60 minute, 90 minute and 120 minute.)
34 / 82
HOW TO USE THE ANYSEE APPLICATION
File Play : Plays the recorded picture file.
Help : Shows anysee Help information..
Minimize : Minimizes the anysee Program.
Configuration(C) : Used to set up the program configuration.
Always On Top : Always displays the anysee program on top.
Change Mode : Change the Mode.
( Select Digital TV, Analog TV, Video, S-Video, Game Mode, File)
Exit(X) : Finishes an anysee program.
controller window.
controller.
Channel list.
“D” is Air Digital, “A” is Air Analog, “CD” is Cable Digital, “CA” is cable Analog.
Favorite Channel list.
35 / 82
HOW TO USE THE ANYSEE APPLICATION
Control Panel
The functions of Control Panel are as follows.
Control Buttons
Power off button : Finishes an anysee program.
Configuration button : Used to set up the program configuration.
Help button : Shows Help information.
Minimize button : Minimizes the anysee program.
Mute button : Mute On/Off.
Volume control button: Enables to control volume level with a mouse.
Rewind button : Plays back the file that it is being played.
Pause button : Pauses the screen.
Play button : Plays input signals, a recorded file or the screen that has/have been stopped or
paused.
Stop button : Stops the screen being played and shifts to the waiting mode.
Record button : Records the current screen to a picture file.
Fast Forward button : Moves forward along the file being played and resumes normal playing.
One time play / Repeat button : Plays the file current playing played once only or plays it
repeatedly.
TV / Radio button : Enables to select TV or Radio and to turn it on.
Still Capture button : Captures the current screen being played.
Subtitle button : Enables to watch the current program with subtitles..
Audio button : Enables to select an audio language from those of many countries.
Teletext button : Provides necessary information required by the viewer
EPG button : Enables to view EPG(Electronic Program Guide) and to preset recording
Channel Information button : Displays information about the current screen being played.
File Open button : Opens a recorded file in a folder and plays it.
Full screen button : Enables to view in full screen on the computer.
Live TV/File button : Toggles between Live TV and File Play modes.
Change Channel button : Enables to select a playing channel and adjusts to it.
36 / 82
HOW TO USE THE ANYSEE APPLICATION
Status Display
TV / Radio : Indicates TV or Radio broadcasting currently being played
File / Live : Indicates playing of the saved file or live broadcasting.
Channel Number : Shows the current channel number.
Channel Name : Shows the current channel name.
Current Time : Shows the current time.
Mute : Indicates muted sound with change of color to red.
Volume : Shows the current volume level.
Signal Strength : Shows the strength of the current signal.
Subtitle : Indicates On/Off of subtitles.
Audio : Indicates audio language of the current channel.
Play Once / Play Repeatedly : Indicates playing once or playing repeatedly.
Multi Audio : Applied to multiple audio services.
Video Window
The functions of Video Windows Controller are the same as the functions of Control Panel
37 / 82
HOW TO USE THE ANYSEE APPLICATION
Mode
anysee E50 support Digital TV / Analog TV / Video / S-Video / Game Mode / File.
You can change the mode as below.
Digital TV : Watch the digital TV(HDTV or SDTV) which input the digital signal from Antenna or
Cable.
Analog TV: Watch the analog TV which input the analog signal from Antenna or Cable.
Video : Watch the video, sound from video camera, VCR, etc.
S-Video : Watch the video from input s-video signal.
Game : Use the Play station or Xbox, etc.
(if you use game instrument in video mode, it is appeared inconsistency of sound and Video)
File : Play the recording file on your hard disk.(According the file formats, it couldn’t play without
anysee recording files)
Scan Channel
There are two methods of scanning the channels, automatic scan and manual scan.
For automatic scan, perform the following sequence and for manual scan, move to menu 4.3.1.6) for
signal reception.
The performance of signal reception varies depending of the antenna capacity and locations.
Reception is not possible if the signal reception rate is below 50-60% even if the strength of signals
is over 80%. If the received signals are weak, try moving the antenna (directional antenna) slowly
left to right until the maximum reception rate is achieved.
When anysee is turned on after the installation of anysee program, a message, There is no channel.
Please scan channels first, appears. Click OK button and scan channel window appears.
38 / 82
HOW TO USE THE ANYSEE APPLICATION
Scan Channel / DIGITAL TV mode
Using the anysee E-Series and antenna for receiving the digital signal, you watch the digital TV in
home or outdoor.
There are two methods of scanning the channels, automatic scan and manual scan.
For automatic scan, perform the following sequence and for manual scan, move to menu for signal
reception.
The performance of signal reception varies depending of the antenna capacity and locations.
Reception is not possible if the signal reception rate is below 50-60% even if the strength of signals
is over 80%. If the received signals are weak, try moving the antenna (directional antenna) slowly
left to right until the maximum reception rate is achieved.
When anysee is turned on after the installation of anysee program, a message, There is no channel.
Please scan channels first, appears. Click OK button and scan channel window appears.
Choose a Scan Channel
1
5
7
8
6
3
2
4
*Surely, scan channel in digital TV.
Select channel scan in configuration.
Set the input signal.
AIR : Choose Air to connect Whilst outdoors (Road antenna)
Cable : Choose Cable to connect Cable signal.
Country : Select country.
Analog TV : Select analog TV channel scan. (Disable in Digital TV mode.)
39 / 82
HOW TO USE THE ANYSEE APPLICATION
Digital TV : Select Digital TV channel scan.
QAM Scan : Select Digital Cable channel scan.
Auto Scan : If you click Auto Scan, channel search will begin automatically.All channels are
scanned automatically. If no reception has been made, check the settings of country and
reception rate again.
Stop : If you click Stop Scan, channel search will stop.
Click Stop Scan when the reception of the wanted channel has been made to stop the
scanning. Wait until Finish window appears. (Recommended)
Manual Scan : Select the channel and bandwidth for manual scan.
The frequency for each channel is different in a different country. Select a country first and
then the channel. Then the frequency will automatically change.
If the required channel was not found, Not Found window appears as shown below.
Signal : Indicate received signal.
Check Signal: The strength and quality of signals is shown.
Strength : Indicate of receiving signal strength.
Quality : Indicate of receiving signal quality.
The signal reception rate varies depending of the antenna capacity and locations. Reception is
possible when the signal reception rate is over 60-70%. If the received signals are weak, try
moving the antenna (directional antenna) slowly left to right until the maximum reception
rate is achieved.
Show the scanned channel.
Create New Channel List : If you hope to delete the priority channel list, please check and
make new channel list.
For manual scan, please input channel and frequency directly.
The frequency for each channel is different in a different country.
OK : Exit configuration.
40 / 82
HOW TO USE THE ANYSEE APPLICATION
Scan Channel / ANALOG TV mode
Using the anysee E-Series and antenna for receiving the analog signal, you watch the analog TV in
home or outdoor. But you can’t measure the degree of sensitive of analog.
The performance of signal reception varies depending of the antenna capacity and locations.
Channel Scan is Auto Scan and Manual Scan.
When anysee is turned on after the installation of anysee program, a message, There is no channel.
Please scan channels first, appears. Click OK button and scan channel window appears.
1
5
7
8
6
3
2
4
* Surely, scan channel in analog TV
Select Channel Scan.
Set the input signal.
AIR : Choose Air to connect Whilst outdoors (Road antenna)
Cable : Choose Cable to connect Cable signal.
Country : Select country.
Analog TV : Select analog TV channel scan.
Digital TV : Select Digital TV channel scan. (Disable in analog TV mode.)
QAM Scan : Select Digital Cable channel scan. (Disable in analog TV mode.)
Auto Scan : If you click Auto Scan, channel search will begin automatically.
All channels are scanned automatically. If no reception has been made, check the settings of
country and reception rate again.
Stop : If you click Stop Scan, channel search will stop.
Click Stop Scan when the reception of the wanted channel has been made to stop the
scanning. Wait until Finish window appears. (Recommended)
Manual Scan : Select the channel and bandwidth for manual scan.
The frequency for each channel is different in a different country. Select a country first and
then the channel. Then the frequency will automatically change.
41 / 82
HOW TO USE THE ANYSEE APPLICATION
If the required channel was not found, Not Found window appears as shown below.
Signal : Disable in analog TV mode
Show the scanned channel.
TV : 0 show the number of scanned TV program.
Radio : 0 show the number of scanned Radio program.
Create New Channel List : If you hope to delete the priority channel list, please check and
make new channel list.
For manual scan, please input channel and frequency directly.
The frequency for each channel is different in a different country.
OK : Exit configuration.
42 / 82
HOW TO USE THE ANYSEE APPLICATION
Edit Channel / DIGITAL TV mode
You can edit channel list or creat new list of favorites.
1
4
6
7
5
2
Select Edit Channel in configuration. If you receive the weak signal program, you can delete
that in channel list. Please check the signal indicator under edit channel.
If you hope to creat new list of favorites, please check the CH No. in Channel box. Favorite list
is located in right side on the screen. Digital broadcasting system indicates “D” in channel list.
Signal of selected channel is indicated.
Selected channel show blue.
UP : Selected channel is up
DOWN : Selected channel is down(change sequence)
DELETE : Selected channel is delete. If you receive same contents in different signal, you can
delete the weak signal content in channel list.
File Load : Saved edit channel list is open.
File Save : Edited channel list is save.
Ascending Lineup : Sort from order to ascending order via channel number.
Descending Lineup : Sort from order to descending via channel number.
OK : Exit configuration.
43 / 82
HOW TO USE THE ANYSEE APPLICATION
Edit Channel / ANALOG TV mode
You can edit channel list or create new list of favorites.
1
4
6
7
5
2
Select Edit Channel in configuration.
If you hope to create new list of favorites, please check the CH No. in Channel box. Favorite list
is located in right side on the screen. Analog broadcasting system indicates “A” in channel list.
Edit Channel name : Analog channel don’t provide program information. So user input the
channel information. If you hope to edit the channel list, please select the channel and double
click. You can input the information and if you want to edit other channel, press enter. If you
hope to finish editing, press or click the any place in channel list.
Signal don’t indicate. (Disable in analog mode)
Selected channel show blue.
UP : Selected channel is up
DOWN : Selected channel is down(change sequence)
DELETE : Selected channel is delete. If you receive same contents in different signal, you can
delete the weak signal content in channel list.
File Load : Saved edit channel list is open.
File Save : Edited channel list is save.
Ascending Lineup : Sort from order to ascending order via channel number.
Descending Lineup : Sort from order to descending via channel number.
OK : Exit configuration.
44 / 82
HOW TO USE THE ANYSEE APPLICATION
Capture
Anysee is able to record SD, HD and capture of image.
1
2
5
6
4
3
Select Capture in configuration.
Set up recording.
Folder : Click this button to view the location to which the recorded file was saved files. You
can change the folder. Standard folder position is 'C : \ Program Files \ anysee \ anysee - K 50
\ RECORD'.
Filename : You may change the name of the recorded file here, e.g., name_CH_date_time.
TRP(In digital TV), name_CH_date_time.MPG(In Analog TV/ Video/S-video/Game).
Limite size : You can limit the recording file size.
You are able to manage and keep image of high-quality as you wants. Please confirm the
remainder of hard disk capacity. (Minimum size is 20 MB.) Maximum sizes are 4GB when
hard-disk file system is FAT 32, you can use all of remained capacity of hard disk when that
is NTFS.
Set up capture of image.
Folder : Click this button to view the location to which the still image was saved files. You can
change the folder. Standard folder position is 'C : \ Program Files \ anysee \ anysee - K 50
\ SNAPSHOT'.
File name : You may change the name of the recorded file here, e.g., name _ CH _ date _
number. BMP
Sound on during Snapshot : Capture sound can do on/off.
Create analog record setting.
Format : Please select the kind of record file.( MPEG-1 / MPEG-2 / VCD / SVCD / DVD )
Usually uses MPEG-2 in occasion and other mode sometimes. According to your computer
system, you can adjust the recording format. VCD mode is necessary to lowest performance
45 / 82
HOW TO USE THE ANYSEE APPLICATION
PC, DVD mode requires highest performance.
(Attention)Files recorded by MPEG-1 and VCD are not replayed in file mode, and if you
hope to show the MPEG-1 and VCD file, you have to use Windows Media Player or other
multimedia video Players.
Quality : Please choose the kind of record quality. (Lowest Quality, Low Quality, Normal,
Height Quality, Best Quality)According to your computer performance, you can choose the
kind of record quality. In case of lower performance computer, please select Lowest Quality,
if you have high performance computer, you can select all quality.
Frame : Related recording quality, digit is number of screen per second. Requiring performance
of high PC as number is high.( 23.97 / 24.00 / 25.00 / 29.97 / 30.00 )
Bit rate : Related recording quality. As number is high, you need high performance computer
and can watch good picture quality. (You can select 500~6000 per 50)
(Attention : Please use the condition of installation)
Notice : when you record the program, it is the available space on your hard disk.
OK : Exit configuration.
46 / 82
HOW TO USE THE ANYSEE APPLICATION
Skins
Just follow below step.
Select (TV/Radio) Skins tab.
You can find the folder to be saved (TV/radio) skins file below window.
You can preview radio skins below window.
If you click Apply button, you can see (TV/radio) skins to be changed below window.
You can select the skin as your taste. Then you can download new skin on anysee home
page.(
http://www.anysee.com or http://www.anysee.co.kr) (it is update continuously.)
1
2
10
4
5
7
3
6
8
9
Select Skins Setting.
TV Skin Setting : you can find the folder include TV skin files.
you can see the TV skin files..
Apply : If you choose the TV skin and press apply, selected skin apply to control panel.
You can see the selected skin.
Radio Skin setting : you can find the folder include Radio skin files.
You can see the Radio skin files.
Apply : If you choose the Radio skin and press apply, selected skin apply to TV window.
You can see the selected skin.
OK : Exit configuration.
47 / 82
HOW TO USE THE ANYSEE APPLICATION
Options
You can use more efficiently on anysee option.
1
2
4
5
3
Select Default Setting.
choose the option.
Use Remote Control : Click here to use Remote Control function.
Remote control Sound On: Click here to turn on your Remote Control Sound.
Your computer powers off by RCU ”power” button (Please keep pressing it for 3 second) :
If you press about 3 second the power button on remote controller, computer is finished.
Expansion function of Sleep Timer (Windows PC shutdown) : Click here to allow the PC to
shut down when the program is turned off by Sleep Timer.
f the user has to be away or goes to sleep for certain period of time leaving anysee on, he can
do so by setting the time for the termination of anysee program and turn-off time of PC.
Use transparent Channel List : Click here to use transparent on List Window such as Favorite
and Channel list.
Overlay function do not exist (The sound comes out but the screen is not seen) : In case of
making a sound and getting out of picture, please check this function.
Not showing “Quick Configuration Window”(After you check DxVA function normally) :
Click here to hide Quick Configuration Window when starting anysee E-series. Channel List
Window, Disable to Favorite List: Click here to hide favorite list.
Set Process priority : Click here to promote anysee process priority order. During operate other
things, this function is to reduce the suspension of screen and sound.
Time Offset : Local Time offset function for adjusting national time difference. GMT is globally
recognized standard time..
OK : Exit configuration.
48 / 82
HOW TO USE THE ANYSEE APPLICATION
Time Shift
1
2
4
3
Select TimeShift Setting.
Set TimeShift : Set up the location and time of recorded file.
Notice : Temporary recordable time to save in hard disk as user select. Max recordable time
always set up to 60 minutes although the recordable time in hard disk is over 60 minutes..
OK : Exit configuration.
49 / 82
HOW TO USE THE ANYSEE APPLICATION
Video setup
1
2
7
4
5
6
3
Select Video Setting.
Set Video Size : Anysee was optimized for graphic cards supporting DxVA function. If other
graphic card that does not support DxVA function is used, CPU usage may increase
considerably or intermittent screen stops may appear due to frame drops. (Graphic card must
support accelerator.)
Full Size : Performance of CPU is high
Default Size : Performance of CPU is Normal
Half Size : Performance of CPU is below
Video Window Size : Click here to adjust your video window size.
Custom / 16:9 / 4:3 : set up video size into custom /16:9 / 4: 3.
Cut Video blank space : Adjust to eliminate the top, bottom, left, right blank space of screen.
“default “ : Set up the default value about cut video blank space.
Video Size : The size of video is the size of frame buffer processed in stream. It changes
depending of the performance of the graphic card.
External Input Setting : Set up inputting Analog signal. (NTSC ( Korea, USA, Japan …) / PAL
/ PAL-N / SECAM)
OK : Exit configuration.
50 / 82
HOW TO USE THE ANYSEE APPLICATION
Audio setup
1
2
4
Select Audio Setting.
Set Analog Audio : When you use anysee E-series in analog mode, you can decide to size of
audio output. Adjust 0 to 228, Sound is decrescent as is near to 0.
OK : Exit configuration.
About
The version information of your current anysee is given here.
The latest version can be downloaded from anysee home page (
http://www.anysee.com).
51 / 82
HOW TO USE THE ANYSEE APPLICATION
Functions
After installation anysee Series and scanning channel, you can watch the TV. This chapter explains
how to watch in mode. In Digital TV mode and Analog TV mode, after scanning channel and you
can watch TV.
Digital TV
Using change mode in control panel, switch digital TV mode.
Please move curser to left side in screen and select channel.
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“ Trouble shooting”
Analog TV
Using change mode in control panel, switch Analog TV mode
Please move curser to left side in screen and select channel.
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“ Trouble shooting”
S-video
Using change mode in control panel, switch S-video mode.
Input video signal to S-video terminal.
Input audio signal to Audio terminal.
Please check the external input setting in "capture".
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“Trouble shooting”
Video
Using change mode in control panel, switch video mode.
Input video signal to video terminal.
Input audio signal to Audio terminal.
Please check the external input setting in "capture".
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened
screen intermittently stops while proceeding or no sound generation, please refer to
“Trouble shooting”
52 / 82
HOW TO USE THE ANYSEE APPLICATION
Game Mode
Using change mode in control panel, switch Game mode.
Input game video signal to Video terminal.
Input audio signal to Audio terminal.
Please check the external input setting in "capture".
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened
screen intermittently stops while proceeding or no sound generation, please refer to
“ Trouble shooting”
File
Using change mode and file open button in control panel, dragging file into video screen, switch file
mode.
Click file open button in control panel, select file you hope to watch.
Using “Backward”, ”Pause”, ”Play”, “Stop”, “Forward”, “Repeat” button in control panel, you can
watch variety screens.
If you play the recorded files which you didn’t use anysee E-series, you cant show the recorded file.
321
4
5
Add files to file list.
Delete files in file list.
Delete file list.
File List.
Press add, show Add Folder / Add File.
Add Folder : add all files in folder to file list.
Add file : add files to file list.
53 / 82
HOW TO USE THE ANYSEE APPLICATION
Recording
Click Recording button to start recording.
Click File Play to open the file stored at the location described in 4.3.4.2).
You can stop the recording with REC or Stop button
Please refer to the recording function described in “Recording” chapter before recording.
54 / 82
HOW TO USE THE ANYSEE APPLICATION
Capturing the motion picture
You can capture a still image by the Still Capture function in the Control Panel, Video window
controller and pop up menu.
Use Space Bar on the Keyboard to capture a still image.
The stored file location and name described in “Recording” chapter.
55 / 82
HOW TO USE THE ANYSEE APPLICATION
Multi View Function (Simultaneously 4 Programs Play)
You can watch maximum 4 channels with sound and picture by selecting Multi View in your pop up
menu.
56 / 82
HOW TO USE THE ANYSEE APPLICATION
Multi Screen Function (Simultaneously 9 Programs View)
You can preview maximum 9 channels by selecting Multi Screen in the pop up menu.
57 / 82
HOW TO USE THE ANYSEE APPLICATION
Teletext
You can watch Teletext by clicking Teletext button or by selecting Show Teletext in the pop up
menu.
You can view Teletext screen using the short-key T
58 / 82
HOW TO USE THE ANYSEE APPLICATION
You can move the Teletext screen by adjusting the number with mouse or remote controller.
If you click the same button one more time, the Teletext is closed.
59 / 82
HOW TO USE THE ANYSEE APPLICATION
Subtitle
You can view the subtitle using Subtitle button in the Control Panel, Video window controller or
pop up menu.
You can view the subtitle using the short key S
60 / 82
HOW TO USE THE ANYSEE APPLICATION
If you click the same button again, the displayed language is changed and if there is no more
language, the subtitle function is terminated.
61 / 82
HOW TO USE THE ANYSEE APPLICATION
EPG (Electronic Program Guide)
anysee allows the user to view the TV program schedule in real time without having to consult other
media (newspaper, magazine, etc).
Also, the user can choose any desired time for reserved recording.
You can view EPG (Electronic Program Guide) using EPG button in the Control Panel, Video
window controller or Show Program Guide in the pop up menu.
1
3
5
4
2
You can view the selected channel, the current date and time.
You can select channel. Selected channel is registered other color.
The selected program information is shown here.
Show Program Guide.
Recording Setup : Setup the reservation of recording.
62 / 82
HOW TO USE THE ANYSEE APPLICATION
Recording List : You can see the list of the reservation of recording.
Refresh : You can refresh EPG.
OK : Exit Electronic Program Guide, return Screen.
Click Recording Setup button to setup the reservation of recording. In analog TV mode, if you click
EPG button, you can show Recording Setup window. The user can select any station, reserve
recording and view the program anytime later. The date and time are based on the registered date
and time supported by Windows.
7
6
3
2
1
4 5 8 10 9
Select channel for recording.
Select date and channel for recording.
Select date and channel for end of recording.
Check record for starting of recording setup. If you could not check “Record”, just it move the
selected channel but it won’t start record on time. If anysee program turn off on time,
automatically program start and search and record the channel.
Select “Run only once”, “Run daily”, “Run weekday”, “Run weekend”.
If you press “Setup” button, you can reserve recording setup.
You show the reservation of recording setup.
Modify : If you hope to revise the reservation of recording setup, click modify and change the
recording setup.
Close : Exit recording setup.
Delete : Delete reservation of recording setup.
63 / 82
HOW TO USE THE ANYSEE APPLICATION
1) Power button: Turns off the program.
2)
Live TV/File mode button: Changes File play to Live mode.
3)
Favorite button: Shows favorite channels in the video window.
4)
Sleep button: Sets reserved sleep time..
5)
16:9 / 4:3 mode button: Changes screen ratio to 16:9, 4:3.
6)
Size mode button: Changes to whole screen, full screen, previous screen.
7)
Teletext button: Teletext screen On/Off.
8)
TV/ Radio button: Changes TV and Radio mode.
9)
Audio button: Changes audio language when multiple audio is used.
10)
Subtitle button: Shows the Subtitle
11)
Capt button: Captures the motion picture at the stopped scene.
12)
Mute button: Mutes sound.
13) Menu button: Shows or hides the Control Panel.
14) EPG : Shows EPG(Electronic Program Guide)
15)
Information: Shows channel information.
16) Exit : Hides Control panel
17) CH : Channel up.
18) CH : Channel down.
19) Vol
: Volume down.
20) Vol
: Volume up.
21) OK: Shows channel list.
22)
button: Records the motion picture. Time shift works in Digital TV mode.
23)
button: Stops playing or recording
24)
button: Pauses playing.
25)
button: Plays Live broadcast or a file.
During working the time shift function, play recorded file.
26)
button: Moves backward in the current playing file and resumes playing it.
27)
button: Moves forward in the current playing file and resumes playing it.
28)
~ Number button: Changes channel and Teletext page.
29)
Previous channel button: Returns to the previous channel
30) Red button: Moves to the red colored page in the Teletext screen.
31) Green button: Moves to the green colored page in the Teletext screen.
32) Yellow button: Moves to the yellow colored page in the Teletext screen.
33) Blue button: Moves to the blue colored page in the Teletext screen.
The above remote controlling is possible in Live mode. Some of the remove control functions are
disabled.
72 / 82
HOW TO USE THE ANYSEE APPLICATION
Remote Control Unit Customer Configuration (Option).
Select Options tab as shown below.
Click here to use Remote Control
Click here to turn the Remote Control Sound on
73 / 82
HOW TO USE THE ANYSEE APPLICATION
Keyboard Shortcuts
Please refer to the below table for keyboard shortcuts for functions.
Some functions of the above short keys are not supported.
( Table 2 ) Hotkey
Basic Functions HotKey
Remote
Control Unit
Description
1 Minimize Z - Minimize anysee
2 Help F1 - Show Help menu
3 Configuration C - Show Configuration
4 Power Off Alt-X Power Terminate anysee
5 Multi Audio A Audio Change audio language
6 Show Subtitle S Subtitle Show subtitle
7 Show EPG E Guide Show Program Guide
8 Show Teletext T Text Show Teletext
9 Information I I Show channel information
10 Full Screen/Normalize Esc,F Full Screen
Toggle between Full screen and
previous screen size
11 Video Record - Record Video Recording
12 Still Capture Space Bar CAPT Capture and save the scene
13 File Open - - Play a picture file
14 Channel Up ], Numeric key PROG up Channel up
15 Channel Down [, Numeric key PROG dn Channel down
16 Volume Up > VOL up Volume up
17 Volume Down < VOL dn Volume down.
18 Mute M Mute Mute
19 Play - Play Play
20 Stop - Stop Stop
21 Pause - Pause Pause
22 Jump 10 % FW PageUp Forward Jump 10% Forward
23 Jump 10% BW Page Down Backward Jump 10% Backward
24 Show Controller F2 MENU Show Control Panel
25 Hide Controller F3 MENU Hide Control Panel
26 Teletext Page Numeric key Numeric key Change Teletext screen
27 TXT1 F5 Red Change Teletext1 screen
28 TXT2 F6 Green Change Teletext2 screen
29 TXT3 F7 Yellow Change Teletext3 screen
30 TXT4 F8 Blue Change Teletext4 screen
31 RECALL - Recall Recall (Ctrl + Z function)
32 SOURCE L Source
33 Favorite Channel Mouse
FAV()
Favorite channel list
34 Channel List Mouse OK Channel list
35 Size Mouse - Customize the screen size
74 / 82
5. INTRODUCION INSTALLATION
Check if usable space in hard disk is enough for recording of more than 1 hour.
anysee stops or blue screen appears occasionally.
Check the Device manager to see if the driver has been properly installed. If “?” symbol appears,
re-install the driver.
Screen intermittently stops while recording.
If recording speed of hard disk is below 4MBps, screen may intermittently stop during viewing..
Recorded screen may also stops likewise.
It may be caused by insufficient system specifications.
Recording more than 100MByte is not possible.
Move to Capture tab in Environment Setting and check if recording size limit has been
selected. If selected, recording can only be possible up to set limit.
PC occasionally turns off itself..
For the convenience of the users, anysee offers the function that allow the PC to turn off when
the reserved program is finished.. Move to Option tab in Environment Setting and check if
Turn off the computer upon termination of reserved program has been selected. If selected,
cancel the selection. Then automatic turn-off will not occur.
anysee program terminates itself occasionally.
anysse offers sleep reservation setting function to allow the user to reserve the time for the
termination of the program. Check if this sleep reservation has been set.
DxVA does not function.
Move to Option tab in Environment Setting and check if Use hardware acceleration function
(DxVA) has been selected.
Check if the graphic in use supports DxVA. If not, screen or audio may intermittently stop when
DxVA option was selected.
Check if Direct X 9.0 was installed. Windows XP SP1 contains Direct X 9.0b and Windows XP
SP2 contains Direct X 9.0c. Screen quality can be improved by Windows update.
File can not be replayed.
Only the files that were saved by anysee application can be replayed. Other general moving
pictures (AVI, MPEG, WMV, RM, etc) can not be replayed.
Check if the selected file route is correct and if the file size is more than 0.
File replay is OK but broadcasting can not be viewed.
Check the connection state of USB able and antenna.
Check if anysee driver has been properly loaded.
Check if Windows XP was updated with SP2. SP1 user must install Hotfix KB822603 and patch
USB 2.0 bugs
Select Edit Channel tab from Environment Setting window and check if channel list exists. If
78 / 82
5. INTRODUCION INSTALLATION
no channel list exists, move to Scan Channel tab and click auto scan or manual scan button to
generate a list of receivable.
Check if reception rate of the channel is over 50%.
Can I use other type of antenna?
It is OK to connect Satellite Master Antenna (outdoor antenna), directional antenna, road
antenna or wire cable. Directional antenna and cable wire provides better quality screen.
PC does not identify anysee product or anysee driver does not appear in Device Manager.
Check if anysee product was connected to USB 2.0 connector.
Check if USB 2.0 host driver has been properly installed. The users of USB 2.0 host controller
for PCI must use the driver provided by USB 2.0 host controller product or install the latest
driver downloaded from the manufacturer’s site.
79 / 82
APPENDIX
Appendix
Glossary
AC-3
Dolby Digital Surround Sound System. A digitally compressed audio format characterized by its
ability to offer as many as six separate digital audio channels. AC-3 is used for DVD-Video titles in
the NTSC format. PAL titles use MPEG-2 audio.
ATSC
“Advanced Television Standard Committee” It’s established by the FCC to define new standards for
publicly regulated broadcast television in the U.S.
Bandwidth
The frequency range allocated to any communication circuit.
COFDM
Coded Orthogonal Frequency Division Multiplexing : It’s the modulation scheme selected by the
DVB committee for digital terrestrial broadcast television. See modulation.
Digital
Describes a system or device in which information is transferred by electrical “on-off”, high-low”,
or “1/0” pulses instead of continuously varying signals or states as in an analog message.
FCC
The Federal Communications Commission, the regulatory board which sets standards for
communications within the United States.
MPEG
Motion Picture Expert Group. A system for compression of digital data.
DVB
Digital Video Broadcast. International Standard for digital TV broadcasting.
EPG
Electronic Programming Guide.
NTSC
“National Television Systems Committee”. A committee of the Electronic Industries Association
that prepared the standards for commercial television broadcasting in the United States, Canada,
Korea, Japan and parts of Central and South America. NTSC format has 525 scan lines (rows) of
resolution at thirty frames per second (30Hz)
80 / 82
APPENDIX
PAL
Phase Alteration Line. This standard is used for commercial broadcasting in most of Europe,
Australia, and parts of Central and South America. PAL format displays at 625 scan lines (rows) of
resolution at 25 frames per second (25Hz)
OSD
On Screen Display
Pixel
Pixel is the most basic element of a display. The resolution of a monitor is defined by the number of
pixels existing horizontally and vertically within the screen part of the monitor. 1 pixel consists of 1
or a number of bits in storage media. The more bits a pixel consists of, the more range of brightness
and color can be expressed. For example, a display device offering 24 bits per pixel can express
16.7 million hues.
A pixel consists of one or more dots in a screen. In a colored display, a hue is defined by a mixture
of red, green and blue dots of different strengths.
Pixel Resolution
Pixel resolution is classified by resolution as follows.
- VGA: 640 x 480
- SVGA: 800 x 600
- XGA: 1024 x 768
- SXGA: 1280 x 1024
- SXGA-Wide: 1600 x 1024
- UXGA: 1600 x 1200
- HDTV: 1920 x 1080
- UXGA-Wide: 1920 x 1200
- QXGA: 2056 x 1536
HDTV
HDTV (High Definition Television) offers clearer pictures (higher resolution) than ordinary TV.
It usually is wider than present NTSC and offers twice as higher resolution. In order to transmit high
resolution picture through present TV bandwidth, a picture is digitized, compressed and signalized
before transmission and when it reaches each home, its data is decompressed and separated before
displaying on the monitor.
DxVA
DxVA (Direct X Video Acceleration) is hardware-wise processing of some of the functions
necessary for MPEG decoding and encoding such as Hardware Motion Compensation iDCT DCT
and color space conversion, etc.
81 / 82
APPENDIX
Product Warranty
________________________________________________________________________________
Thank you for purchasing anysee Product.
AMT Co., Ltd. warrants the anysee USB TV Box to be free from defects in material and
workmanship for a period of 1year from date of initial retail purchase. We will, at our option, repair
or replace the defective product. The limited warranty does not cover any losses or damage that
occur as a result of:
Improper installation
Misuse or negligence or operation with faulty equipment.
Repair or modification by anyone other than AMT Co., Ltd. or an authorized repair agent.
Name :
……………………………………..
Address :
……………………………………..
Country :
……………………………………..
E-mail :
……………………………………..
Product name :
……………………………………..
Purchasing date : month day year
…………… …………… ……………
Serial Number :
………………………………………………………
You can find it on the Installation CD. (Check your software version)
Place of purchase:
If you require a repair service, you must present the warranty card. Therefore, please keep this
warranty card safely .
AMT Co., Ltd.
13th Fl, Shin young Bldg., 1597-1 Seocho-dong, Seocho-gu, Seoul
Korea
http://www.anysee.com E-mail: anysee@anysee.com
82 / 82
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Anysee e 30 c plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Anysee e 30 c plus in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 15,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info