722107
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
USER MANUAL
Soundcore Liberty 2
Charging
Slide to open or close the charging case to activate the LED battery indicator.
Fully charge both the earbuds and the charging case before the rst-time using.
To preserve battery lifespan, fully charge at least once every 45 days.
To prevent damage, use the provided USB-C cable.
Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
Powering On/Off
Slide to open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will
automatically power off.
2
1
OFF
ON
To manually power on, press and hold the multi-function button on either one of earbuds
for 1 second.
To manually power off, press and hold the multi-function button on either one of earbuds
for 5 seconds.
LED behaviour (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
Pairing
True Wireless Stereo Connection
Slide to open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
LED behaviour (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
When you are on a call, press and hold the multi-function button on either one of the
earbuds for 1 second, then this earbud will switch to be the primary earbud.
When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-out screen.
2
1
3
Soundcore
Liberty 2
Soundcore
Liberty 2
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
LED behaviour (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped out. Don’t worry and it will not inuence the using.
Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the case cover open, then press and hold the button
on the charging case for 3 seconds. The LED indicator on the right earbud will ash rapidly.
3
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
Soundcore
Liberty 2
Soundcore
Liberty 2
3”
R
1 2
Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the ear tips and ear wings that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
1 2 3
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Play / Pause
L/R
1
Press (R/L)
Next track
R
2
Press twice (R)
Previous track
L
2
Press twice (L)
Volume up / down
The volume up / down controls can be customized in
Soundcore App
Control volume via the connected device
Answer / End a call
L/R
1
Press (R/L)
Reject a call
L/R
1”
Press and hold for 1 second (R/L)
Activate Siri / Other voice
assistant software
L/R
Voice Assistant
1”
Press and hold for 1 second (R/L)
Soundcore App
Make sure the earbuds rmware is always the most updated before using.
Download the Soundcore App for HearID, UI customization, EQ settings and earbuds rmware
update.
HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes
the results. It tailors the EQ settings and creates a personalized sound prole for you.
UI customization: In stereo mode, all of the controls can be customized in the App. In
mono mode, the controls are xed.
EQ settings: There’re more than 20 EQ settings you can choose in the App to optimize
your experience while enjoying different music genres.
Earbuds rmware update: The earbuds rmware can be updated in the App. You will be
informed once the new version of firmware is detected when you connect the earbuds
with the App.
Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
Place the earbuds into the charging case and make sure they are being charged. Keep the
charging case open, then press and hold the button on the charging case for 10 seconds until
the LED indicators on both earbuds ashes red 3 times.
All the memory data will be cleared.
1 2
10”
3
8 Specifications
Specications are subject to change without notice.
Input 5 V 500 mA
Rated output power 5 mW @ 1% THD
Battery capacity 65 mA x 2 (earbuds); 500 mA (charging case)
Charging time 1.5 hours
Playtime
(varies by volume level and content)
8 hours (Totally 32 hours with the charging case)
Driver size 10 mm
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Bluetooth version V 5.0
Bluetooth frequency 2402-2480 MHz
Bluetooth prole AVRCP1.5, A2DP1.3, HFP1.6, HSP1.2
Audio codec format SBC, AAC, aptX
Bluetooth range 10 m / 33 ft
Qualcomm® aptX
TM
Technical specications
Compression ratio: 4:1
Word depth: Support 16bit and 24bit
Decoding delay: Sample rate 48kHz<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered
in the United States and other countries.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Anker Soundcore Liberty 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Anker Soundcore Liberty 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Anker Soundcore Liberty 2

Anker Soundcore Liberty 2 Snelstart handleiding - Deutsch, English, Français, Italiano, Português, Espanõl, Türkiye - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info