682016
1
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
OWNER’S MANUAL
Model AC215
Video, Movement & Sound Monitor
TABLE OF CONTENTS
WARNINGS ............................................................................................................................................................................... 2
SETUP REQUIREMENTS .................................................................................................................................................................4
STEP 1 - Charging the Parent Unit (9 hours) ........................................................................................................................... 5
STEP 2 - Installing the Sensor Pad .............................................................................................................................................6
STEP 3 - Setting up the Camera ..................................................................................................................................................9
STEP 4 - Turning on your monitor ............................................................................................................................................ 10
STEP 5 - Testing and getting to know your monitor ........................................................................................................... 11
STEP 6 - Activating and deactivating additional functions ............................................................................................. 15
Troubleshooting ............................................................................................................................................................................. 20
Limited warranty .............................................................................................................................................................................22
Technical specifications ................................................................................................................................................................22
Cord Safety
Ensure the Camera is at least 1 metre away from your baby’s
cot. The Sensor Pad cord must always be kept out of reach of
baby and secured using the cord cover kit provided.
For assistance, FAQs or guidance with your monitor
please visit our Customer Support page at angelcare.co.uk
01CFO2A_Manuel_AC215_EN_UK_12647.indd 1 17-12-19 07:51
Latest revisions for models:
AC215, AC210, AC1300, AC1320
APPENDIX
Your product may include latest revision
as followed:
PARENT UNIT WITH LITHIUM ION BATTERY PACK (NOT INSTALLED)
Parent Unit
Lithium ion battery pack
(for Parent Unit)
PROTECT THE ENVIRONMENT
The wheelie bin symbols mean that according to
local laws and regulations your product and/or
its battery shall be disposed of separately from
household waste. When the product/battery
reaches its end of life take it to a collection point
designated by local authorities. The seperate
disposal and recycling will help conserve natural
resources and protect human health and the
environment. Refer to User’s Guide for removal
of batteries.
LOCK
UNLOCK
1
CAUTION:
DO NOT REMOVE THE YELLOW
PLASTIC BATTERY COVERING
BATTERY INFORMATION
Rechargeable Li-ion Battery 1lCP5/46/45 Made in China
Model: 454543 3.7V 1000mAh 3.7Wh YYYY/EH
Springpower Technology (Shenzhen) Co.,Ltd.
WARNING:
• Do not disassemble, crush, puncture the battery, or allow metal to touch battery
terminals (short-circuit).
• Do not dispose of in re or incinerate.
• Do not store or expose in high temperature environment (140 degree F/60 degree C).
• Do not use the battery after immersed in water.
• Refer to user’s manual before use this battery.
MH46844
1) Unlock and open the battery
compartment on the rear of the
unit and remove the cover.
2) Plug in the battery connector
to the Parent Unit by aligning
the connector pins. Replace the
Parent Unit cover.
3) Connect the adaptor to the Parent
Unit and into an electrical outlet.
4) Prior to the rst use, charge the
Parent Unit for 9 continuous hour.
STEP 1 - HOW TO INSTALL THE BATTERY
2
3
BATTERY
ALIGN
CONNECTOR PINS
4
1. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
This product is designed to aid in the monitoring of your child. When using
the monitor, you must still provide the supervision necessary for the
continued safety of your child. Monitoring of premature babies, or those
considered to be at risk, should always be carried out under the supervision
of a health professional. This monitor SHOULD NOT be used as a medical
device, nor as a device to prevent Sudden Infant Death Syndrome (SIDS).
2. WARNING Strangulation Hazard — Children have STRANGLED in cords.
Keep adapter cords out of the reach of children (more than 1 meter away).
NEVER use Sensor Pad(s) without the protective cord covering. Check
protective cord covering before each use. Immediately discontinue use of
Sensor Pad(s) if protective covering
is damaged or broken.
3. Never use extension cords with
adapters. ONLY use the adapters
provided.
4. When an adapter is plugged into
an electrical outlet, DO NOT touch
the exposed end.
5. ALWAYS be sure that both the
transmitter and receiver are working
properly and are within range of each
other. Test the monitor before first
use, periodically and when changing
location of the Camera.
6. ALWAYS be sure to immediately check on baby whenever an alarm
sounds.
7. DO NOT use monitor near water (such as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8. Keep monitor AWAY from heat sources (such as stoves, radiators, etc.).
9. ALWAYS place both the Camera and the Parent Unit on a flat surface
in an upright position and allow for proper ventilation. DO NOT place on
sofas, cushions, beds, etc. which may block ventilation.
10. This monitor uses public airwaves to transmit signals. The Parent Unit
may pick up signals or interference from other monitors in your area.
Your monitor may even be picked up by other households. To protect
your privacy, make sure both units are turned OFF when not in use. If you
experience interference, change the channel on both units.
11. This product is NOT a toy. DO NOT allow children to play with it.
12. This product contains small parts. Adult assembly required. Exercise
care when unpacking and assembling the product and keep small parts
away from children.
13. When using the monitor, the room temperature should be between
10°C and 40°C.
BATTERY WARNING
14. Danger of explosion if batteries are incorrectly replaced. The Parent
Unit battery is a replaceable Li-Ion battery. Only use the Angelcare
recommended replacement battery. Insert batteries with correct polarity.
DO NOT short-circuit supply terminals. ONLY use the recommended
batteries or equivalent (volts and size) and the correct adapter. Remove
battery from Parent Unit when product is stored for long periods of time
or when batteries are exhausted. Dispose exhausted batteries properly.
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE
REFERENCE.
PLEASE READ THE WARNINGS AND
INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE
INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY OR DEATH OR DAMAGES TO THE
PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE
WITH ADULTS, CHILDREN OR INFANTS OLDER
THAN 24 MONTHS.
THE SENSOR PAD IS NOT INTENDED TO BE USED
TO DETERMINE IF A CHILD IS OUT OF THE COT.
WARNING
Adult assembly required.
Keep small parts away from children when
assembling.
We, at Angelcare
®
, stand behind all of our
products.
If you are not completely satisfied or have any
questions,
United States and Canada: Please contact us at:
angelcare@cdecinc.ca
Other countries: Please contact your local
distributor.
Keep all batteries away from children.
15. IMPORTANT SAFETY INSTRUCTIONS
15.1 Heed all warnings – All warnings on the product and in the operating
instructions should be adhered to.
15.2 Follow all instructions – All operating and use instructions should
be followed.
15.3 Water and moisture - DO NOT use this apparatus near water. For
example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
environment or near a swimming pool and the like. Care should be taken
so that objects DO NOT fall onto units and that liquids are not spilled into
either unit or Sensor Pad through its openings.
15.4 Cleaning - Disconnect all units before cleaning. DO NOT immerse in
water any part of the monitor. Clean only with dry cloth.
15.5 Ventilation - DO NOT block any ventilation openings. Allow for proper
ventilation when units are in use. DO NOT cover the Camera or the Parent
Unit with any object such as a blanket. DO NOT place it in a drawer
or in any location which would muffle the sound or interfere with the
normal flow of air.
15.6 Heat sources - DO NOT install near any heat sources such as radiators,
heat registers, stoves, TVs or other apparatus (including amplifiers) that
produce heat. Heat can damage the case or electrical parts.
15.7 Power cord protection - Protect the Sensor Pad cord and
Adapter’s power cord from being walked on or pinched by furniture
or other items – Power supply cords should be routed so that they
are not likely to be walked on or pinched by items upon or against
them, paying particular attention to cords and plugs, convenience
receptacle, and the point where they exit from the product.
The socket outlet shall be installed near the equipment and shall be easily
accessible. Make sure to plug the adapter to the socket outlet nearest
to the equipment and that is easily accessible. To disconnect from mains,
unplug the adapter.
15.8 Accessories - Only use attachments/accessories specified by the
manufacturer. DO NOT place this product on an unstable cart, stand,
tripod, bracket or table. The product may fall, causing serious injury to
a child or adult and serious damage to the product. Use ONLY with a
cart, stand, tripod, bracket or table recommended by the manufacturer
or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions.
15.9 Unplug this appliance during lightning storms or when not used for
long periods of time.
15.10 Servicing - DO NOT attempt to service this product yourself as
opening or removing covers (except battery door) may expose you to
dangerous voltage or other hazards.
15.11 Replacement parts - When replacement parts are required, be sure
the replacement parts specified by the manufacturer have the same
characteristic as the original part. Unauthorized substitution may result
in fire, electric shock or other hazards.
15.12 Usage - This baby monitor is intended as an aid. It is NOT a substitute
for responsible and proper adult supervision and should not be used as such.
Use this appliance ONLY for its intended use as described in this manual.
15.13 Power Sources - Operate this product only from the type of power
source indicated on the type plate of the adaptor.
If you are unsure of
the type of power supply to your home, consult your dealer or local
power company.
15.14 Overloading - DO NOT overload wall outlets, extension cords or
integral convenience receptacles as this can result in a risk of fire or
electric shock.
15.15 Object and Liquid Entry - NEVER push objects of any kind into this
product through casing slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock. NEVER
spill liquid of any kind on the product.
WARNINGS
2
01CFO2A_Manuel_AC215_EN_UK_12647.indd 2 17-12-19 07:51
15.16 Antenna - The antenna used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and
must not be collocated or operating in conjunction with any other antenna
or transmitter.
15.17 Power Lines - An outside antenna system should NOT be located
in the vicinity of overhead power lines or other electric light or power
circuit, or where it can fall into such power lines or circuits as contact
with them may be fatal.
15.18 Vibration Source - When the monitor is in use, DO NOT use
a bedside cot, cot mobile or other cot accessories that may produce
vibrations. Other sources of vibrations may include fans, washing
machines, loud music, etc. These sources of vibration may interfere
with the performance of your Angelcare
®
monitor and the alarm will not
sound if it continues to detect any movement other than your baby’s.
Be sure all vibration sources are eliminated before using the monitor.
You may experience false alarms for several reasons. The most
common reason is the Camera has not been turned OFF af t e r
you have removed your baby from the cot. Another reason is the
Sensor Pad has not been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface with the printed side facing
up. The sensitivity level may also need to be adjusted. Refer to Step 5.1.
Always be sure to immediately check on baby whenever an alarm sounds.
15.19 Sensor Pad - Your Sensor Pad can be used in any cot that is stationary.
If the cot has a spring or slat base, place a hard board between the cot base
and the Sensor Pad measuring at least 33 x 33 cm and 6 mm thick. Only
use your Angelcare
®
monitor in a stationary sleeping environment such
as a cot where the Sensor Pad can rest on a completely flat, firm surface.
The Sensor Pad is made of plastic and does not permit the air to circulate.
The refore, mild ew build u p could develo p undernea th the mat tress in th e Senso r
Pad area. We suggest rotating the mattress regularly to prevent any mildew.
16. IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
16.1 Use ONLY the type and size of batteries specified in the owner’s manual.
There is a risk of explosion if batteries are replaced with an incorrect type.
16.2 Charge the battery for 9 hours prior to first use. Be sure to have the
monitor in the OFF position during this period. ONLY use the adapters
included with your monitor.
16.3 DO NOT use these adapters with any other equipments.
16.4 When unplugging the adapter from the Camera, be sure it is switched
to the OFF position. If it isn’t, the unit will revert to battery mode if
batteries are installed.
16.5 DO NOT dispose batteries in fire. They may explode. Check with local
regulations for possible special disposal instructions.
16.6 Exercise care in handling batteries in order not to short out the
batteries with conducting materials such as rings, bracelets and keys.
Overcharging, short circuiting, reverse charging, mutilation, or incineration
of batteries must be avoided to prevent one or more of the following
occurrences: release of toxic materials, release of hydrogen and/or oxygen,
gas and rise in surface temperature.
16.7 DO NOT attempt to recharge batteries provided with or identified for
use with this product that are not intended to be charged. The batteries
may leak corrosive electrolyte or explode.
16.8 DO NOT attempt to rejuvenate the batteries provided with or identified
for use with this product by heating them. Sudden release of battery
electrolyte may occur, causing burns or irritation to eyes or skin.
16.9 If and when necessary, the batteries must be replaced with identical
new ones or equivalent (volts and size). If a battery to be replaced is
connected with other batteries in series, replace the other batteries at the
same time as well. DO NOT mix old and new batteries.
16.10 Reverse polarity installation of the batteries in the end product must
be avoided. Reverse insertion of batteries can cause charging, and that
may result in leakage or explosion.
16.11 Remove batteries from both units if you store the product over 30
days because the batteries could leak and damage the product.
16.12 Discard ‘dead’ batteries as soon as possible since ‘dead’ batteries
are more likely to leak in a product. If a battery has leaked or vented, it
should be replaced immediately using protective gloves.
16.13 DO NOT store this product, or the batteries provided with or identified
for use with this product, in high-temperature areas.
3
E
N
01CFO2A_Manuel_AC215_EN_UK_12647.indd 3 17-12-19 07:51
Model AC215
Video, Movement
& Sound Monitor
SETUP REQUIREMENTS
INCLUDED:
Parent Unit Camera Tabletop stand with removable
wall mount metal ball
(for Camera)
(Screwdriver required
for wall mounting)
* Always place Angelcare logo side up *
Wired movement Sensor Pad
6 Pre-threaded cord covers with
Split USB cable
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm
Minimum dimensions:
33 cm x 33 cm
Maximum dimensions:
equal to the mattress size
WHAT YOU WILL NEED (NOT INCLUDED):
Hardboard
Miniature Philips
Screwdriver
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface area
Lithium ion battery pack
(for Parent Unit)
AC adapter
(for Camera)
AC adapter
(for Parent Unit)
4
01CFO2A_Manuel_AC215_EN_UK_12647.indd 4 17-12-19 07:51
STEP 1 - CHARGING THE PARENT UNIT (9 HOURS)
1
2
3
Battery compartment lock
1) Unlock the battery
compartment on the backside
and remove the cover. Insert
the provided rechargeable
battery into the compartment.
Contacts of the battery
and the contacts in the
compartment must be aligned.
2) Connect the adapter to the
Parent Unit and into an
electrical outlet.
3) Charge the unit for
9 continuous
hours (prior to first use).
NOTE:
To optimize your battery performance
please refer to Battery Guidelines in the
Troubleshooting section.
PARENT UNIT:
Right Side
Adapter
Outlet
Speaker
(not shown)
Stand
Battery
door
Front Side
3.5” LCD Screen
Power ON/OFF
Indicator
Zoom button
Zzz button
(Video ON/OFF)
MENU/SELECT
Button
Brightness
(+ or -)
Power ON/OFF
UP/DOWN Button/Volume Control
VOX Indicator
Sound & TIC Light Indicator
6 Pre-threaded cord covers with
Split USB cable
5
E
N
01CFO2A_Manuel_AC215_EN_UK_12647.indd 5 17-12-19 07:51
WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords:
Keep adapter cords out of the reach of children (more
than 1 meter away).
Because of the serious strangulation risk to infants and
toddlers, parents and caregivers should never place
the Camera within 1 meter of a cot.
NEVER use Sensor Pad without the cord covers. Check
cord covers before each use to ensure it is securely
placed under the leg of the cot. Discontinue use of
Sensor Pad if any cord covers are damaged or broken.
NEVER use extension cords with adapters. ONLY use
the adapters provided. This product is not a toy. Never
allow children to play with it.
STEP 2 - POSITIONING THE MOVEMENT SENSOR PAD
2.1 - SELECT A LOCATION FOR THE CAMERA
IMPORTANT
Place the cot near a supporting wall and far from air currents. Install the Camera on a
flat, stable surface facing the cot at a distance of at least 1 metre. Make sure to plug the
adapter to the socket outlet nearest to the equipment and that is easily accessible.
Place the
Camera at least
1 metre from the
cot
1) Insert jack 1 into the Sensor Pad and twist it clockwise to lock it.
6 5 4 3 2 1
6
01CFO2A_Manuel_AC215_EN_UK_12647.indd 6 17-12-19 07:51
2.2 - SELECT THE COT LEG TO SECURE THE CORD COVERS
6
5
4
3
2
1
6
5
4
3
2
1
Figure 1 Figure 2
RECOMMENDED
OR
Use the cot leg by the wall closest to the Camera (Figure 1). In cases where the Camera is
across the room, use the leg closest to the Camera to position the covered wire (Figure 2).
It is always preferable that the covered cord run along a wall.
2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
IMPORTANT
If your cot does not have a solid, stable surface for the Sensor
Pad, you will need to place a support under it, to ensure correct
operation of the system.
This hardboard support should be at least 6 mm thick and should
have minimum dimensions of 33 cm x 33 cm. This support board
must be larger than the Sensor Pad surface area.
The Sensor Pad functions with any size and type of mattress except memory-foam
mattresses, hollow frame mattresses and water beds. The hardboard maintains a
constant pressure on the Sensor Pad, enabling it to detect the baby’s movements
even when the baby is at the edges of the cot.
Hardboard
Sensor Pad
6
5
4
3
1
2
2
3
1) Remove the mattress
from the cot.
2) Place the Sensor Pad –
Angelcare logo side up
on top of the hardboard.
3) Run the connection pin,
warning label and the
first 5 cord covers down
along the backside of
the cot leg, between the
mattress support and the
inside edge of the cot.
5
4
5
4) Bring the first 4 cord
covers down the floor,
and keep the 5th cord
cover vertically, along
the backside of the
cot leg, between the
mattress and the inside
edge of the cot.
5) Remove any cord slack
to make sure no parts
of the cord are loose.
7
E
N
01CFO2A_Manuel_AC215_EN_UK_12647.indd 7 17-12-19 07:51
6
8 cm
6
6) Place the 6th cord
cover approximately
8 cm from the edge of
the mattress support.
4132
CLIC!
7
7) Snap together the
remaining cord covers that
will run along the floor.
8 9
8) Remove any cord
slack to make sure no
parts of the cord are
loose.
9) Peel off the double-
sided tape on the 4th
cord cover and place
it securely under the
cot leg.
WARNING
STRANGULATION HAZARD
Remove all slack from Sensor Pad Cord.
When lowering the mattress support
as your child grows, slide the vertical
Cord Cover downward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
The Sensor Pad is not designed
for use with adults, children or infants
older than 24 months.
Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from cot and store
for future use.
BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
8
01CFO2A_Manuel_AC215_EN_UK_12647.indd 8 17-12-19 07:51
STEP 3 - SETTING UP THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand.
Depending on the position you choose, you’ll need to remove the metal ball from the stand
to wall mount camera.
MUST BE MORE THAN
1 METRE AWAY
MUST BE MORE THAN
1 METRE AWAY
OR
Sensor Pad
5
6
4 3 2 1
Sensor Pad
5
6
4 3 2 1
1) Install the Camera on
a flat, stable surface
facing the cot at a
distance of at least
1 metre and plug the
Sensor Pad cord into
the Camera.
2) Check to make sure
the Sensor Pad has
not moved from
position.
3) Place the mattress
back inside the cot.
1
2
1) Connect the USB
plug to the Camera.
2) Connect the USB
plug with the power
adapter and then
with an electrical
outlet.
3) Adjust the Camera
using the magnetic
mount to get the
best view of baby in
the cot.
9
E
N
01CFO2A_Manuel_AC215_EN_UK_12647.indd 9 17-12-19 07:51
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Angelcare AC215 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Angelcare AC215 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info