681994
8
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
OWNER’S MANUAL
VIDEO, MOVEMENT
& SOUND MONITOR
Model AC1100-A
FOR YOUR PEACE OF MIND
ES
57
FR
29
EN
2
TABLE OF CONTENTS
WARNINGS .................................................................................. 3
AC1100-A SETUP REQUIREMENTS .............................................. 8
STEP 1 - Charging the Parent Unit (10 hours) .......................... 9
STEP 2 - Installing the Sensor Pad ............................................ 10
STEP 3 - Setting up the Nursery Unit ........................................13
STEP 4 - Turning on your monitor ..............................................14
STEP 5 - Testing and getting to know your monitor ............ 15
STEP 6 - Activating and deactivating
additional functions .......................................................19
Troubleshooting ...............................................................................25
Limited warranty ..............................................................................27
Technical specifications ................................................................. 28
FRANÇAIS .......................................................................................... 29
ESPAÑOL ............................................................................................ 57
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS
OLDER THAN 24 MONTHS
THE SENSOR PAD IS NOT INTENDED TO BE USED TO DETERMINE IF A CHILD IS OUT
OF THE CRIB
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare
®
, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: please contact us at: angelcare@cdecinc.ca
Other countries: please contact your local distributor.
2
1. THIS PRODUCT CANNOT REPLACE
RESPONSIBLE ADULT SUPERVISION. This
product is designed to aid in the monitoring
of your child. When using the monitor, you
must still provide the supervision necessary
for the continued safety of your child.
Monitoring of premature babies, or those
considered to be at risk, should always
be carried out under the supervision of
a health professional. This monitor is not
intended to be used as a medical monitor.
2.
WARNING Strangulation Hazard —
Children have STRANGLED in cords. Keep
adapter cords out of
the reach of children
(more than 3 feet
[0.9 m] away).
NEVER use Sensor
Pad without the
protective cord
covering. Check
protective cord
covering before each use. Immediately
discontinue use of Sensor Pad if protective
covering is damaged
or broken.
3. Never use extension cords with AC
adapters. ONLY use the AC adapters
provided.
4. When an AC Adapter is plugged into
an electrical outlet, DO NOT touch the
exposed end.
5. ALWAYS be sure that both the transmitter
and receiver are working properly and are
within range of each other. Test monitor
before first use, periodically and when
changing location of the Nursery Unit.
6. ALWAYS be sure to immediately check
on baby whenever an alarm sounds.
7. DO NOT use monitor near water (such
as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8. Keep monitor AWAY from heat sources
(such as stoves, radiators, etc.).
9. ALWAYS place both the Nursery Unit
and the Parent Unit on a flat surface in
an upright position and allow for proper
ventilation. DO NOT place on sofas,
cushions, beds, etc. which may block
ventilation.
10. This monitor uses public airwaves to
transmit signals. The Parent Unit may
pick up signals or interference from
other nursery monitors in your area. Your
monitor may even be picked up by other
households. To protect your privacy, make
sure both units are turned OFF when not in
use. If you experience interference, change
the channel on both units.
11. This product is NOT a toy. DO NOT allow
children to play with it.
12. This product contains small parts. Adult
assembly required. Exercise care when
unpacking and assembling the product
and keep small parts away from children.
13. When using the monitor, the room
temperature should be between 50°F
(10°C) and 10F (40°C).
BATTERY WARNING
14. Use ONLY AAA RECHARGEABLE
batteries for the Parent Unit. DO NOT
mix old and new batteries. DO NOT
mix alkaline, standard or rechargeable
batteries. Insert batteries with correct
polarity. DO NOT short-circuit supply
terminals. ONLY use the recommended
batteries or equivalent (volts and size)
and the correct adapter. Remove batteries
when product is stored for long periods
of time or when batteries are exhausted.
Dispose exhausted batteries properly. DO
NOT recharge non-rechargeable batteries.
Rechargeable batteries are ONLY to be
charged under adult supervision. Keep all
batteries away from children.
WARNINGS
3
E
N
15. IMPORTANT SAFETY INSTRUCTIONS
15.1 Read these instructions - All the safety
instructions should be read before the
product is operated.
15.2 Keep these instructions. The safety
and operating instructions should be
retained for future reference.
15.3 Heed all warnings – All warnings on the
product and in the operating instructions
should be adhered to.
15.4 Follow all instructions – All operating
and use instructions should be followed.
15.5 Water and moisture - DO NOT use
this apparatus near water. For example,
near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet environment or near
a swimming pool and the like. Care should
be taken so that objects DO NOT fall onto
units and that liquids are not spilled into
either unit or Sensor Pad through its
openings.
15.6 Cleaning - Disconnect all units before
cleaning. DO NOT immerse in water any
part of the Nursery Unit and the Parent
Unit. Clean only with dry cloth.
15.7 Ventilation - DO NOT block any
ventilation openings. Allow for proper
ventilation when units are in use. DO NOT
cover the Nursery Unit or the Parent Unit
with any object such as a blanket. DO NOT
place it in a drawer or in any location which
would muffle the sound or interfere with
the normal flow of air.
15.8 Heat sources - DO NOT install near
any heat sources such as radiators, heat
registers, stoves, TVs or other apparatus
(including amplifiers) that produce heat.
Heat can damage the case or electrical
parts.
15.9 Power cord protection - Protect the
Sensor Pad cord and the Adapter’s power
cord from being walked on or pinched by
furniture or other items – Power supply
cords should be routed so that they are not
likely to be walked on or pinched by items
upon or against them, paying particular
attention to cords and plugs, convenience
receptacle, and the point where they exit
from the product.
15.10 Accessories - Only use attachments/
accessories specified by the manufacturer.
DO NOT place this product on an unstable
cart, stand, tripod, bracket or table. The
product may fall, causing serious injury
to a child or adult and serious damage to
the product. Use ONLY with a cart, stand,
tripod, bracket or table recommended by
the manufacturer or sold with the product.
Any mounting of the product should follow
the manufacturer’s instructions.
15.11 Unplug this appliance during lightning
storms or when not used for long periods
of time.
15.12 Servicing - DO NOT attempt to
service this product yourself as opening
or removing covers (except battery doors)
may expose you to dangerous voltage or
other hazards.
15.13 Replacement parts - When
replacement parts are required, be sure
the replacement parts specified by the
manufacturer have the same characteristic
as the original part. Unauthorized
substitution may result in fire, electric
shock or other hazards.
15.14 Usage - This baby monitor is
intended as an aid. It is NOT a substitute for
responsible and proper adult supervision
and should not be used as such. Use this
appliance ONLY for its intended use as
described in this manual.
15.15 Power Sources - Operate this
product only from the type of power
source indicated on the type plate of the
adaptor.
If you are unsure of the type of
power supply to your home, consult your
dealer or local power company.
15.16 Overloading - DO NOT overload
wall outlets, extension cords or integral
convenience receptacles as this can result
in a risk of fire or electric shock.
15.17 Object and Liquid Entry - NEVER
push objects of any kind into this product
through casing slots as they may touch
dangerous voltage points or short out
parts that could result in a risk of fire or
electric shock. NEVER spill liquid of any
kind on the product.
4
15.18 Antenna - The antenna used for this
transmitter must be installed to provide
a separation distance of at least 7.9
(20 cm) from all persons and must not be
collocated or operating in conjunction with
any other antenna or transmitter.
15.19 Power Lines - An outside antenna
system should NOT be located in the
vicinity of overhead power lines or other
electric light or power circuit, or where it
can fall into such power lines or circuits as
contact with them may be fatal.
15.20
WARNING Strangulation Hazard —
Children have STRANGLED in cords. Keep
adapter cords out of
the reach of children
(more than 3 feet
[0.9 m] away).
NEVER use Sensor
Pad without the
protective cord
covering. Check
protective cord
covering before each use. Immediately
discontinue use of Sensor Pad if protective
covering is damaged or broken.
15.21 Interference - This monitor uses public
airwaves to transmit signals. The Parent
Unit may pick up signals or interference
from other nursery monitors in your area.
Your monitor may even be picked up by
other households. To protect your privacy,
make sure both units are turned OFF when
not in use. If you experience interference,
change the channel on both units.
15.22 Vibration Source - When the monitor
is in use, DO NOT use a crib mobile or
other crib accessories that may produce
vibrations. Other sources of vibrations
may include fans, washing machines, loud
music, etc. These sources of vibration may
interfere with the performance of your
Angelcare
®
monitor and the alarm will
not sound if it continues to detect any
movement other than your baby’s. Be sure
all vibration sources are eliminated before
using the monitor.
You may experience false alarms for several
reasons. The most common reason is the
Nursery Unit has not been turned OFF after
you have removed your baby from the crib.
Another reason is the Sensor Pad has not
been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm
surface with the printed side facing up.
The sensitivity level may also need to be
adjusted. Refer to Step 5.1. Always be sure
to immediately check on baby whenever
an alarm sounds.
15.23 Sensor Pad - Your Sensor Pad can
be used in any crib that is stationary. If
the crib has a spring or slat base, place a
hard board between the crib base and the
Sensor Pad measuring at least 13” x 13”
(33 x 33 cm) and 1/4 inch (6 mm) thick.
Only use your Angelcare
®
monitor in a
stationary sleeping environment such as
a crib where the Sensor Pad can rest on
a completely flat, firm surface.
5
E
N
16. IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
16.1 Use ONLY the type and size of
batteries specified in the owner’s manual.
There is a risk of explosion if batteries are
replaced with an incorrect type.
16.2 Use ONLY AAA rechargeable
batteries and/or the AC Adapters provided
for the Parent Unit. You must use only
rechargeable batteries in the Parent Unit.
DO NOT use alkaline batteries or you will
severely damage the unit.
16.3 Charge the batteries for 10 hours prior
to first use. Be sure to have the monitor in
the OFF position during this period. ONLY
use the AC Adapters included with your
monitor.
16.4 DO NOT use these adapters with any
other equipments.
16.5 When unplugging the AC Adapter
from the Nursery Unit, be sure it is
switched to the OFF position. If it isn’t, the
unit will revert to battery mode if batteries
are installed.
16.6 DO NOT use rechargeable batteries
in the Nursery Unit. Use alkaline batteries
ON LY.
16.7 DO NOT dispose batteries in fire. They
may explode. Check with local regulations
for possible special disposal instructions.
16.8 Exercise care in handling batteries
in order not to short out the batteries
with conducting materials such as rings,
bracelets and keys. Overcharging, short
circuiting, reverse charging, mutilation, or
incineration of batteries must be avoided
to prevent one or more of the following
occurrences: release of toxic materials,
release of hydrogen and/or oxygen gas
and rise in surface temperature.
16.9 DO NOT attempt to recharge batteries
provided with or identified for use with
this product that are not intended to be
charged. The batteries may leak corrosive
electrolyte or explode.
16.10 DO NOT attempt to rejuvenate the
batteries provided with or identified for
use with this product by heating them.
Sudden release of battery electrolyte may
occur, causing burns or irritation to eyes
or skin.
16.11 If and when necessary, the batteries
must be replaced with identical new ones
or equivalent (volts and size). If a battery
to be replaced is connected with other
batteries in series, replace the other
batteries at the same time as well. DO
NOT mix old and new batteries.
16.12 Reverse polarity installation of the
batteries in the end product must be
avoided. Reverse insertion of batteries
can cause charging, and that may result
in leakage or explosion.
16.13 Remove batteries from this product
if you store the product over 30 days
because the batteries could leak and
damage the product.
16.14 Discard ‘dead’ batteries as soon as
possible since ‘dead’ batteries are more
likely to leak in a product. If a battery has
leaked or vented, it should be replaced
immediately using protective gloves.
16.15 DO NOT store this product, or the
batteries provided with or identified for
use with this product, in high-temperature
areas.
6
WARNING
(North America Only)
17.1 Modifications not authorized by the
manufacturer may void users authority to
operate this device.
17.2 NOTE: This equipment has been tested
and found to comply with part 15 of the
FCC Rules and the Industry Canada licence-
exempt RSS standard(s). These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
17.3 However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment OFF and ON, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
17.4 This device complies with the part 15
of the FCC Rules and the Industry Canada
licence - exempt RSS standards(s). Operation
is subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. Caution: To maintain the compliance with the FCC’s RF exposure guideline,
install the Nursery Unit at least 20 cm from ALL persons. The transmitter of this device must
not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
CAN ICES-3 (B)/NMB-3 (B)
7
E
N
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm (1/4’’)
Minimum dimensions:
33 cm (13’’) x 33 cm (13’’)
Maximum dimensions:
equal to the mattress size
WHAT YOU WILL NEED (NOT INCLUDED):
Miniature Philips
Screwdriver
3 AAA Alkaline Batteries
for Nursery Unit
VIDEO, MOVEMENT
& SOUND MONITOR
Model AC1100-A
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface area.
BABY’S ROOM:
SETUP REQUIREMENTS
3X
INCLUDED:
Rechargeable
Parent Unit
Nursery Unit Charging Cradle Belt Clip
6
5
4
32 1
Sensor Pad with pre-installed cord covers
3 Rechargeable AAA
Batteries for Parent Unit
3X
2 AC Adapters
2X
Hardboard
6
5
4
32 1
Keep
at least
3 ft (0.9 m)
IMPORTANT
Sensor Pad
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install
the Nursery Unit on a flat, stable surface facing the crib at a distance
of at least 3 feet (0.9 meter). Make sure to plug the adapter to the
socket outlet nearest to the equipment and that is easily accessible.
8
STEP 1 - CHARGING THE PARENT UNIT (10 HOURS)
1 2
3 4
1) Remove the Belt Clip.
2) Remove the battery door and insert
the Rechargeable Batteries (included).
3) Connect the AC Adapter to the
Charging Cradle and
into an electrical outlet.
4) Charge the unit for 10 continuous
hours (prior to first use).
10
IMPORTANT
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.
PARENT UNIT:
Front Side Left Side
F
B
C
A
D
E
G
J
I
H
A) LCD Touchscreen
B) POWER ON/OFF
C) Microphone
D) Speaker
E) Charging Cradle
F) Belt Clip
G) Speaker
Volume Buttons
H) Talk Back Button
I) Battery Door
J) AC Adapter Outlet
(not shown)
NOTE:
To optimize your battery performance
please refer to Battery Guidelines in the
Trouble Shooting section.
9
E
N
STEP 2 - INSTALLING THE SENSOR PAD
WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords.
Keep adapter cords out of the reach of children
(more than 3 feet [0.9 m] away).
Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should never
place the Nursery Unit within 3 feet (0.9 meter) of a
crib.
NEVER use Sensor Pad without the cord covers.
Check cord covers before each use to ensure it is
securely placed under the leg of the crib. Discontinue
use of Sensor Pad if any cord covers are damaged or
broken.
NEVER use extension cords with AC adapters. ONLY
use the AC adapters provided. This product is not a
toy. Never allow children to play with it.
6
5
4
32 1
Keep
at least
3 ft (0.9 m)
IMPORTANT
Cord covers 1, 2, 3, 4:
Position on floor
Cord cover 4:
Contains double sided
tape to securely install
beneath crib leg
Cord cover 5:
Position vertically
between mattress
support and floor
Cord cover 6:
Place under
the mattress
Sensor Pad with pre-installed cord covers
2.1 - SELECT A LOCATION FOR THE NURSERY UNIT
Select a location for the Nursery Unit that is at
least 3 feet (0.9 meter) away from the crib.
10
6
5
4
3
2
1
6
5
4
3
2
1
Fig 1
Fig 2
1) Use the crib leg by the wall closest to
the Nursery Unit (Fig. 1). In cases where
the Nursery Unit is across the room, use
the leg closest to the Nursery Unit to
position the covered wire (Fig. 2). It is
always preferable that the covered cord
run along a wall.
2.2 - SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS
RECOMMENDED
1) Remove the mattress from the crib.
2) Place the Sensor Pad - printed side up
- on top of the hardboard at the center
of the crib.
3) Run the connection pin, warning label
and the first 5 cord covers down along
the backside of the crib leg, between
the mattress support and the inside
edge of the crib.
4) Bring the first 4 cord covers down
the floor, and keep the 5
th
cord cover
vertically, along the backside of the crib
leg, (between the mattress and the
inside edge of the crib).
5) Remove any cord slack to make sure
no parts of the cord are loose.
3
2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
6
5
4
3
1
2
OR
4
5
5
11
E
N
6
3''
6
7
4132
CLIC!
4
3
2
1
8
The Sensor Pad functions with any size
and type of mattress except memory-foam
mattresses and hollow frame mattresses.
The hardboard maintains a constant
pressure on the Sensor Pad, enabling it to
detect the baby’s movements even when
the baby is at the edges of the crib.
10
9
WARNING
STRANGULATION HAZARD
Remove all slack from Sensor Pad Cord.
When lowering the mattress support
as your child grows, slide the vertical
Cord Cover (5) upward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
The Sensor Pad is not designed for use
with adults, children or infants older
than 24 months.
Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from crib and store
for future use.
BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done
6) Place the 6
th
cord cover approximately
3’’ (8 cm) from the edge of the mattress
support.
7) Snap together the remaining cord
covers that will run along the floor.
8) Remove any cord slack to make sure
no parts of the cord are loose.
9) Peel off the double-sided tape on the
4
th
cord cover and place it securely
under the crib leg.
10) Install the Nursery Unit on a flat, stable
surface facing the crib at a distance of
at least 3 ft (0.9 m) and plug the Sensor
Pad cord into the Nursery Unit.
11) Check to make sure the Sensor Pad has
not moved from position.
12) Place the mattress back inside the crib.
12
STEP 3 - SETTING UP THE NURSERY UNIT
1
1) Remove the battery door and insert
3 AAA Alkaline Batteries (not included).
2) Place the Nursery Unit at a minimum
of 3 ft (0.9 m) away from the crib.
3) Connect the AC Adapter to the Nursery
Unit and into an electrical outlet.
4) Direct the angle of the camera toward
the crib using the rotating dial.
NOTE:
The batteries maintain power
supply in case of power outage.
NURSERY UNIT:
Front Side Back Side
A
B
C
D
E
F
G
H
I
K
L
M N
J
A) Night Light
B) Main Button
C) POWER ON/OFF
(Left ‘Wing’)
D) Night Light ON/OFF
(Right ‘Wing’)
E) Video Camera
F) 4 Infrared LEDs
(Night Vision Camera)
G) Power Indicator (green)
Low Battery Indicator (red)
H) Microphone
I) Speaker
J) Sensor Pad Outlet
K) AC Adapter Outlet
L) Roating Dial
for Camera Angle
M) Battery Door
(not shown)
N) Tripod Outlet*
(not shown)
* Nursery Unit may be installed on a tripod (not included).
3
4
6
5
4
32 1
2
IMPORTANT
Keep at least
3 ft (0.9 m)
13
E
N
STEP 4 - TURNING ON YOUR MONITOR
OK
4
2
1) Press the Parent Unit ON/OFF button
for 2 seconds until blue screen appears.
2) The Parent Unit will display
Video mode screen.
3) Press the Menu icon to access
main menu.
4) The Parent Unit will display
Menu mode.
5) Push and hold the Nursery Unit left
‘wing’ button for 2 seconds.
Temperature icon:
Indicates room temperature
Temperature Alarm icon: Indicates
Temperature Alarm is active
Pendulum icon: Indicates the
Motion Sensor is active
Sound icon: Indicates that Sound
function is active
Alarm icon: Indicates selected
alarm mode
Sound alarm
Sound alarm
and vibration
Vibration only
INDICATION BAR IMPORTANT ICONS
Connection icon: Indicates the
connection quality between the
Parent Unit and Nursery Unit.
Good connection
Poor connection
Lost connection
Out-of-Range
Battery Level icon:
Indicates battery level
Empty
1/3 Full
2/3 Full
Full
3
1
5
When Parent Unit is turned ON and
Nursery Unit is OFF, Parent Unit will
display Disconnected Mode and will
turn itself OFF after 60 seconds.
If there is a lost connection
between the 2 units (refer to
troubleshooting):
The Out-of-Range icon will
appear on the screen.
The Lost Connection icon will
appear on the indicator bar.
14
5.1 - SENSOR PAD
1) Press Menu icon to access
main menu.
2) Press Movement icon to activate
or deactivate Movement Alarm.
3) Press OK icon to confirm.
1) Move your hand lightly on the mattress.
The Pendulum icon will appear
on Parent Unit indicator bar.
It will move as you move your
hand and trigger a ‘TIC’ sound.
2) Remove your hand from the mattress.
After 15 seconds you will hear a
TIC’ pre-alarm sound, and 5 seconds
later the Movement Alarm will trigger.
IF THE ALARM DOES NOT SOUND
Avoid contact with crib while Sensor Pad is in operation.
Place crib near a supporting wall.
Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.
Adjust Sensor Pad sensitivity level.
ON
OFF
1 2
TO ACTIVATE THE SENSOR PAD:
TO TEST THE SENSOR PAD:
MOTION ALARM
Alarm activates when no movement is detected by Sensor Pad for 20 seconds.
Both the Parent Unit and Nursery Unit speakers will emit loud warning sound.
Movement Alarm icon will show on the LCD screen.
1
OK
2
STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
IMPORTANT
When in Menu or Sub-menu modes,
sound transmission between Parent
and Nursery Units will be temporarily
deactivated. ONLY movement-
detection alarm will remain active (if
function is activated).
OK
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by pressing
the OK icon.
The Angelcare
®
monitor can be used with the pre-program factory settings or you can
also customise your settings to your preference.
15
E
N
1) Press Menu icon to access
main menu.
2) Press settings icon
to access sub-menu.
3) Press movement sensitivity icon to choose
the desired sensitivity level (1 to 5).
4) Press OK icon to confirm.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
TO ACTIVATE THE TIC FUNCTION:
Allows you to hear a TIC sound when Sensor Pad function is activated.
1
OK
1) Press Menu icon to access
the main menu.
2) Press TIC icon to activate or deactivate
the tic function.
3) Press OK icon to confirm.
2
ON OFF
TO STOP THE ALARM
Press the Parent
Unit Movement
Alarm icon
Press the Nursery
Unit’s Main button
Hold down left ‘wing’
button for two seconds
to turn OFF the Unit
Regular TIC sound will emit from Parent Unit
and a moving pendulum will appear
on Parent Unit indicator bar.
OR
1
OK
2
OK
OFF
ON
ON
3
IMPORTANT
The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
Once you are finished using the Sensor Pad, please remove it from the baby’s
crib and store it away.
NOTE:
If you are receiving false alarms,
adjust the sensitivity level.
16
1) Press Menu icon to access
main menu.
2) Press sound icon to activate
or deactivate sound.
3) Press OK icon to confirm.
5.2 - SOUND
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
ADJUST SOUND LEVEL PUT IN SILENT/MUTE MODE PUT IN DIALOGUE MODE
Raise volume (+)
Lower volume (-)
Press the (-)
button for 2
seconds to
mute sound.
Press and hold
Talk Back
button to speak
to baby.
ON OFF
TO ACTIVATE SOUND:
5.3 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the Adapters from both units.
If the green light on the Nursery Unit does not show, replace the batteries.
If the Parent Unit and its screen do not light up, recharge the batteries.
1
OK
2
IF YOU HEAR NO SOUND:
Check that both units are powered on.
Check that both units are plugged
into functioning electrical outlets.
Check the batteries in both units
(replace or recharge them if necessary).
Bring Parent Unit closer to Nursery Unit.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 10 ft. apart (3 m).
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
1/3 full 2/3 full full
PARENT UNIT BATTERY ALARM
Alarm activates when the batteries need to be recharged.
Parent Unit will emit a beep sound every 15 seconds.
Battery Alarm icon will show on LCD screen.
17
E
N
Sound Mode: ON
Speaker Volume: Level 3 (of 6)
Motion Mode: ON
Sensor Pad Sensitivity: Level 3 (of 5)
TIC: ON
Temperature Unit: Celcius Canada Fahrenheit USA
Temperature Alarm: OFF
VOX Mode: ON
VOX Level: Level 2 (of 4)
Timer: OFF
Alarm Mode: Sound alarm only
Video Camera: ON
DEFAULT SETTINGS
YOU ARE NOW READY
TO USE YOUR MONITOR
The Angelcare
®
monitor can be used with the pre-program factory settings
or you can also customise your settings to your preference.
IMPORTANT
Test your monitor before first use.
Test your monitor regularly to ensure it is functioning correctly.
Test your monitor every time you move the Sensor Pad to a different place.
18
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
6.1 - VOICE ACTIVATION (VOX) OR CONTINUOUS SOUND MODE
Allows you to select your option on how you monitor sound:
VOX (voice activation picks up sound based on the setting of the sensitivity level) or
Continuous (sound monitoring is continuously on, picking up all sounds).
TO ADJUST THE VOX SENSITIVITY:
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit.
1) Press Menu icon to access
the main menu.
2) Press settings icon
to access sub-menu.
3) Press the VOX icon to activate
or deactivate the VOX function.
NOTE:
By deactivating VOX the Continuous
setting is ON.
4) Press OK to confirm.
1) Press Menu icon to access
the main menu.
2) Press settings icon
to access sub-menu.
3) Press VOX icon sensitivity to choose
sound sensitivity level (1 to 4).
4) Press OK to confirm.
ON
OFF
VOX ON
(VOX)
VOX OFF
(Continuous)
IMPORTANT
When in the Menu or Sub-menu
modes, sound transmission between
Parent and Nursery Units will be
temporarily deactivated. ONLY the
Movement Alarm will remain active
(if function is activated).
OK
All changes and
adjustments made
in the main menu and
sub-menus will not be
activated unless you
confirm them by
pressing the OK icon.
TO ACTIVATE VOX MODE:
1
1
OK
OK
2
2
OK
OFF
ON
ON
OK
OFF
ON
ON
3
3
19
E
N
6.2 - ALARM
Allows you to select your preferred Alarm mode for the Parent Unit.
1) Press the Menu icon to access
main menu.
2) Press the Settings icon
to access sub-menu.
3) Press the Alarm icon to change
the alarm mode.
4) Press OK to confirm.
IMPORTANT
When in Setting mode no sound or alarms will transmit to the Parent Unit, except
the Movement Alarm (if this function was already activated).
Sound alarm will replace vibration
mode when the Parent Unit is
in its Charging Cradle.
Sound alarm only
Sound alarm
and vibration
Vibration only (the alarm will
not sound on Parent Unit but
it will on Nursery Unit).
1
OK
2
OK
OFF
ON
ON
3
Alarm mode icon
shows in the top bar
of the Parent Unit.
6.3 - HOLD
Allows you to put your Angelcare Monitor on HOLD.
1) Press the Menu icon to access
main menu.
2) Press the Hold icon
OR
Press and hold the Nursery Unit
Main button for at least 2 seconds.
3) Hold icon will appear on the screen.
4) Press the Hold icon or Nursery Unit
Main button again to return
to normal operation.
Nursery Unit Night Light will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on hold.
IMPORTANT
When your monitor is on HOLD, the motion-detection feature and Movement Alarm
are disabled.
1
OK
2
2
20
6.4 - THERMOMETER
TO CHANGE THE MEASUREMENT UNIT:
1
1
1
OK
OK
OK
1) Press the Menu icon to access
main menu.
2) Press the Temperature icon to access
sub-menu.
3) Press the ˚C ˚F icon to change from
Celsius to Fahrenheit.
4) Press OK to confirm.
1) Press the Menu icon to access
main menu.
2) Press the Temperature icon to access
sub-menu.
3) Press the Temperature Alarm icon
to activate or deactivate
temperature alarm.
4) Press OK icon to confirm.
2
2
2
o
C
ºC
ºF
ON
o
F
ºC
ºF
OFF
Celsius
ON
Fahrenheit
OFF
Temperature Alarm icon:
Indicates temperature alarm
is active.
TO SET THE TEMPERATURE RANGE:
TO ACTIVATE THE TEMPERATURE ALARM:
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
1) Press the Menu icon to access
main menu.
2) Press the temperature icon to access
sub-menu.
3) Press (+ or -) to set maximum
temperature range (15 to 32
˚Celsius
/59 to 90 ˚Fahrenheit).
4) Press (+ or -) to set minimum
temperature range (5 to 20 ˚Celsius
/41 to 68 ˚Fahrenheit).
5) Press OK icon to confirm.
3
3
3
4
TEMPERATURE ALARM
Alarm activates when temperature rearches maximum or minimum set temperature.
Parent Unit will emit 4 consecutive beeps, every 5 seconds.
Temperature Alarm icon will show on LCD screen.
The range between the minimum and maximum
temperature must be at least 4
˚
C/7
˚
F. An error
tone will be heard if you try to set it up below
this minimum level.
21
E
N
6.5 - VIDEO
Allows you to turn video function ON or OFF.
6.6 - SCREEN SAVER
Allows you to set the screen saver starting point.
MANUAL SETTING:
To trigger manually the screen saver mode push the Parent Unit Power button.
Do not push it for more than 2 seconds since this will shut down the Parent Unit.
1) Press the Menu icon to access
main menu.
2) Press the Video icon to activate
or deactivate the video function.
3) Press OK to confirm.
4) Press the Menu icon to return
to main menu.
1) Press the Menu icon to access
main menu.
2) Press Settings icon
to access sub-menu.
3) Press the Screen Saver icon to select
the delay before video mode turn
into screen saver mode.
4) Press OK to confirm.
NOTE:
Screen Saver icon will appear
when video is in Screen Saver mode.
ON OFF
1
OK
2
OFF
4
3
1
OK
2
OK
OFF
ON
ON
3
OFF/5/10/15/20 sec
TO REVERT BACK TO CAMERA CAPTION
Press Talk Back
button
Push the ON/OFF
(but do not hold down for more
than 2 seconds or unit will shut
OFF)
OROR
Press the screen
22
6.7 - INFRARED NIGHT VISION
Allows you to capture image when lighting is unsufficient.
6.9 - PAGER
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press Nursery Unit main button for less
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
AUTO: The infrared LEDS will turn ON automatically
when the lighting is not sufficient. The image
transition takes 20 seconds
ON: The infrared LEDS are ON at all times.
OFF: The infrared LEDS are OFF at all times.
The Moon icon will appear
when the infrared LEDS are ON.
There are 4 built-in infrared LEDs
on the Nursery Unit to enable clear
black and white image. The image
transition takes 20 seconds.
TO ACTIVATE NIGHT VISION:
Press the Night Vision icon to chose available modes:
TO STOP THE PAGING SOUND:
Press the Parent
Unit screen
Press the Nursery Unit’s
main button
OR
6.8 - NIGHT LIGHT
Allows you to use your monitor as a Night Light.
TO ACTIVATE THE LIGHT:
Push right ‘wing of Nursery Unit to the Night Light
ON or OFF.
23
E
N
6.10 - ZOOM MODE
Allows you to zoom in to twice the normal view.
1
2
1) Press the Zoom icon.
2) Press the directional arrows to zoom in
on what you want to see more closely.
3) Press the Zoom icon again to return
to normal view.
6.12 - KEY TONE
Allows you to activated or deactivate key tone sound.
1) Press the Menu icon to access
main menu.
2) Press the Settings icon
to access sub-menu.
3) Press icon to activate or deactivate
key tone sound.
4) Press OK icon to confirm.
ON
OFF
ON OFF
3
1
OK
2
OK
OFF
ON
ON
3
6.13 - TIMER
Allows you to time certain activities.
1) Press Menu icon to access
main menu.
2) Press Timer icon
to start or stop the timer.
3) View Timer in video mode.
(shows in minutes only).
Stops automatically after 5 hrs 59 min.
Stops automatically if the Parent Unit
is turned OFF.
ON OFF
1
OK
2
0:00
3
6.11 - MUTE
Allows you to put your monitor in Silent/Mute mode.
TO PUT ON MUTE:
Press the (-) button and hold
for 2 seconds to mute sound.
TO UNMUTE:
Press the (-) button again and hold
for 2 seconds to unmute sound.
NOTE:
On the Parent Unit,
the Mute icon will blink.
24
TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERIES
Ensure that you fully charge your batteries for 10 hours before their first use.
To maintain maximum battery life it is recommended that you fully discharge your
batteries periodically. Battery performance can be diminished by leaving the batteries
constantly charging on the charging cradle. If your Parent Unit is no in use, please turn
it OFF.
Inadequate battery power can impair the performance of your monitor. If you are
not happy with the performance of your Parent Unit/Monitor, please replace the
rechargeable batteries (3 x NIMH Rechargeable batteries).
It is advisable to change the batteries every 6 months.
FALSE ALARMS
Turn OFF the Nursery Unit.
Verify the connection between the Sensor Pad and the Nursery Unit. Unplug and
reconnect the cord.
Make sure there is no bedding between mattress and the Sensor Pad.
If the crib has a spring or slat base, place a hardboard between the crib base and the
Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4 inch (6 mm) thick.
Make sure Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to Step 5.1.
ALARM WILL NOT SOUND
Avoid contact with the crib when the monitor is ON.
Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement
from outside the crib.
You may need to decrease the sensitivity, refer to Step 5.1.
NO SOUND IS BEING TRANSMITTED
Bring the Parent Unit closer to the Nursery Unit.
Check/replace batteries or recharge Parent Unit.
Check connections or change to another electrical outlet.
Ensure both units are ON.
Ensure mains supply units are activated.
Check on the top bar of the Parent Unit to see if the Monitor is on “MUTE” instead
of “ON”. Refer to Step 5.2.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
Check connections or change to another electrical outlet.
Push and hold the left ‘wing’ for 2 seconds to turn the Nursery Unit ON.
WEAK RECEPTION
Bring units closer together.
Change the position of one or both units.
Place units on a flat surface away from baby’s reach.
Replace the batteries or recharge Parent Unit.
25
E
N
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
Move units farther apart (at least 3 meters/10 feet apart).
Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
Turn the Parent Unit back ON by pushing and holding the power button (left ‘wing’)
for 2 seconds.
Replace the batteries or recharge Parent Unit.
If you experience a problem that is not noted in this manual,
please do not return the product to the store. If you are not completely
satisfied or have any questions:
United States and Canada: please contact us at: angelcare@cdecinc.ca
Other countries: please contact your local distributor.
We may have a simple solution to your problem.
26
LIMITED WARRANTY
Angelcare
®
warrants to the original owner of this product that Angelcare
®
video, movement
and sound monitor (model AC1100-A) is free from any material and workmanship defects,
for a period of one (1) year from the date of the original purchase. If this monitoring system
fails to function properly when used as directed under normal conditions within the one
year period, Angelcare
®
will either repair or replace the product, at our discretion, free of
charge. Please contact your distributor.
The product must be accompanied by a proof of purchase, either a bill of sale or other
proof that the monitoring system is within the warranty period. Angelcare
®
will bear the
cost of repairing or replacing the product and shipping it back to you.
This warranty does not apply to a product which has been damaged as a result of
improper maintenance, an accident, improper voltage supply or any other form of
misuse. The warranty is also void if the owner repairs or modifies the product in any
way. Angelcare
®
is not liable for any incidental or consequential damages with regard
to this product. The warranty also excludes any liability other than what is stated above.
No other warranty is given.
This warranty does not cover products and accessories which are not Angelcare-branded,
or any problems that result from usage that is not in accordance with product instructions,
failure to follow the product instructions, or problems caused by using accessories, parts or
components not supplied by Angelcare.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM
THE USE OF THIS PRODUCT.
IMPORTANT!
This Angelcare
®
monitor is a personal care product. Please do not return this product
to the store. If you have questions or need help, please call your distributor before
returning this product.
REGISTER ANGELCARE PRODUCTS
Register your Angelcare
®
monitor and other
Angelcare
®
products on our website:
www.angelcarebaby.com
ANGELCARE MONITORS INC.
9975, avenue. De Catania, Local B
Brossard, Québec, J4Z 3V6
Canada
27
E
N
TECHNICAL SPECIFICATIONS
Range:
Open field (Open area without
obstructions): up to 655 feet (200 meters).
Number of Channels:
USA/Canada: 19 channels.
Europe: 64 Channels.
Power Supply:
3 AAA alkaline batteries (not included) or
7.5V DC Adapter for Nursery Unit.
3 AAA rechargeable batteries and 7.5V DC
adapter for Charging Base for the Parent
Unit.
Caution: To reduce the risk of electric
shock, do not expose this product to rain
or moisture.
Danger of explosion if batteries are
incorrectly replaced. The included Batteries
are 3 AAA NIMH rechargeable batteries,
manufactured by GPI INTERNATIONAL
LIMITED (GN60AAAHC, 1.2V 600mAh) or
by HIGHPOWER TECHNOLOGY CO., LTD
(HFR-44AAAJ600, 1.2V 600mAh).
PROTECT THE ENVIRONMENT
This electronic equipment contains reusable material and must not be disposed
with domestic waste. Please take it to a collecting point for electric and electronic
equipment (ask your local authorities for details).
They may only be replaced by
3 AAA NIMH rechargeable batteries.
Batteries:
DO NOT mix old and new batteries.
DO NOT mix alkaline standard
(carbon-zinc), or rechargeable
(NI-CD, NIMH, etc) batteries.
Transmission:
Data transmission between the Parent
Unit and Nursery Unit is made on the
2.4GHz frequency.
Hereby, Angelcare Monitors Inc, declares
this baby monitor is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.
The EU declaration of conformity can be
obtained through your local distributor.
Please refer to address in the manual.
ErP COMPLIANCE
SOUTH AFRICA-BRAZIL-ECUADOR-EUROPEAN UNION
Use only Angelcare
®
Brand power supply-model number T07505V001
GERMANY
Use only Angelcare
®
Brand power supply-model number T07505F002
AUSTRALIA
Use only Angelcare
®
brand power supply-model number T07505S002
NORTH AMERICA
Use only Angelcare
®
brand power supply-model number T07505U002
28
IM1100NA-040815
www.angelcarebaby.com
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Angelcare AC1100-A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Angelcare AC1100-A in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 9,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info