792126
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
”Satellite Guide” is use for user to enter local longitude; local lat-
itude and satellite longitude. By the evaluation from the receiver
evaluate the antenna azimuth and antenna elevation; user can
follow this guidance to adjust antenna.
1. You can use number keys to input parameters in ”Local
Longitude”, ”Local Latitude” and ”Satellite Longitude”.
2. You can use [Left/Right] key to select east or west in ”Local
Longitude” and ”Satellite Longitude”, select north and south
in ”Local Latitude”.
3. Moving highlight to ”Start” item and press [OK] key. The lower
column on the screen will calculate the corresponding value
automatically.
4. Orientation means the angle between south and satellite.
5. Press [Exit] key to draw back to ”Main” Menu.
10.5 TERRESTRIAL INSTALLATION
Press [OK] key to enter the selected item.
1. You can select the Bandwidth according different country.
2. You can set the Tuner Power ON/OFF.
3. Press [Red] key can directly into blind scan mode to scan the
current programs.
4. Press [Green] key to enter the following menu.
Scan Mode
1. There are two modes. You can scan channel bychannel or
by frequency”.
2. When scan band is UHF and region is ”France”,the range of
Ch No. is from 21 to 69. When scan
3. band is VHF and region is ”France”, the range of Ch No. is
from 1 to 9. (it’s according to region)
4. Press [Red] key to enter blind scan menu, or press [Green]
key to enter TP scan menu.
5. Press [Exit] key to exit the scanning.
10.6 CABLE INSTALLATION
Press [OK] key to enter the selected item.
1. You can select the Scan Mode, Manual Scan or Blind Scan.
2. You can input the Frequency by use the numeric button of
the RCU.
3. You can input the Second Frequency by use the numeric but-
ton of the RCU, if you set the Scan Mode to Blind Scan.
4. You can input the Symbol Rate by use the numeric button of
the RCU.
5. You can select the QAM value among 16QAM, 32QAM,
64QAM, 128QAM and 256QAM.
6. You can turn ON or OFF the NIT Search, if you set the Scan
Mode to Manual Scan.
7. When you complete your modification, press OK button on
Search item to enter Scan menu and then.
8. press OK button, it will begin to scan.
11. SYSTEM
When you enter to ”System” menu, you will see a screen like below:
In ”System” menu:
1. Press[Left/Right]key to select menu items.
2. Press[OK]key to enter the selected item.
11.1 LANGUAGE
When you enter to ”Language” menu, you will see the screen
like below:
21
USER’S MANUAL
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Amiko T60 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Amiko T60 in de taal/talen: Engels als bijlage per email.

De handleiding is 9.4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info