806231
14
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
18
Prepare fi lm
Please note that welding seams, which are applied with the
vacuum sealer do not cross. The open sides to be sealed
must be located opposite each other and not adjacent. Do not cut
off welded seams that are already on the fi lm.
1. First, prepare the required number of bags.
For this, unroll a piece of lm from the lm roll and cut it with
appropriate scissors or cutting bar 7 to the required length.
Please note that due to the sealing, the usable length of
the bag will be slightly shorter than the piece that you
have cut off of the fi lm roll.
2. To use the cutting bar 7, fl ip it open as far as noticeable resist-
ance, see Fig. B.
If you move the cutting bar beyond the resistance, it will
be removed from the device. To reattach it to the device,
see Fig. D.
3. Position the fi lm over the vacuum sealer.
4. Snap shut the cutting bar, let it lock in on the right and slide the
blade button 1 to the left or right, if necessary, into the limit
stop.
If the blade button is not outside of the area of the lm,
no cutting will occur during the cutting process.
5. Press the blade head 1 slightly downwards onto the lm,
while sliding it onto the opposite side.
Use
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ambiano GT-VBS-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ambiano GT-VBS-01 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ambiano GT-VBS-01

Ambiano GT-VBS-01 Gebruiksaanwijzing - Deutsch - 22 pagina's

Ambiano GT-VBS-01 Gebruiksaanwijzing - Français, Italiano - 70 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info