731527
78
Verklein
Vergroot
Pagina terug
1/251
Pagina verder
7
Operation






Oil level check (par. 5.1.1) - - -
Oil change
1
(par. 6.3) - -
Cleaning the silencer
and the engine (par. 7)
- - -
Checking and cleaning
the air lter
2
(par. 8)
- - -
Changing the air lter (par. 8) - - -
Spark plug check (par. 9) - - -
Changing spark
plugs (par. 9)
- - -
Fuel lter check
3
- - -
1
Change the oil every 25 hours if the engine is
operating under heavy load or in hot weather.
2
Clean the air lter more frequently if the
machine is operating in dusty areas.
3
To be carried out by a Specialised Centre.
6.3 OIL CHANGE
For the required type of oil, observe the
indications provided in the technical data table.
Drain the oil out while the engine
is warm, being careful not to touch
the hot engine nor the drained oil.
Unless otherwise stated in this
machine Instruction Manual, to
change the oil it is necessary to:
1. Place the machine on a at surface.
2. Clean around the ller cap and unscrew
the cap with dipstick (g. 6.A).
3. Provide a suitable container for collecting
the oil and unscrew the drain plug (g. 6.G).
4. Ret the drain plug (g. 6.G) and tighten it.
5. Top up with new oil (par. 5.1.1).
6. Check that the oil level has reached the
«MAX» notch on the dipstick (g. 6.B).
7. Close the cap (g. 6.A) again and clean up
any traces of oil that was possibly spilt.
6.4 CLEANING THE SILENCER
AND THE ENGINE
The silencer must be cleaned
when the engine is cold.
Use a jet of compressed air (g. 7.A) to remove
any debris and dirt that could cause a re
from the silencer and its protective cover.
Ensure that the cooling air intakes
are not obstructed (g. 7.A).
Clean the plastic parts with a sponge
(g. 7.B) soaked in water and detergent.
6.5 AIR FILTER MAINTENANCE
1. Clean around the lter cover (g. 8.A).
2. Take the cover o (g. 8.A) by
unscrewing the two knobs.
3. Remove the ltering element (g. 8.B + 8.C).
4. Take the pre-lter (g. 8.C) out
of the cartridge (g. 8.B).
5. Tap the cartridge (g. 8.B) on a solid
surface and blow it from the inside with
compressed air to remove dust and debris.
6. Wash the pre-lter sponge(g. 8.C) with
water and detergent and leave it to air dry.
IMPORTANT Do not use water,
petrol, detergents or any other
products to clean the cartridge.
IMPORTANT The pre-lter sponge
(g. 8.C) must NOT be oiled.
1. Clean out any dust and debris from inside
the lter housing (g. 8.D) being careful to
close the extraction duct with a cloth (g. 8.E)
to stop them from getting into the engine.
2. Remove the cloth (g. 8.E) , place the ltering
element (g. 8.C + 8.B) in its housing and
put the cover back in place (g. 8.A).
6.6 SPARK PLUG CHECKS
AND MAINTENANCE
1. Take the spark plug down (g. 9.A)
using a socket wrench (g. 9.B).
2. Clean the electrodes (g. 9.C) with a metal
brush, removing any carbonaceous build-up.
3. Using a thickness gauge (g. 9.D)
ensure the gap between electrodes is
correct (0.6 - 0.8 mm).
4. Put the spark plug back in (g. 9.A) and
tighten rmly using a socket wrench (g. 9.B).
Replace the spark plug if the electrodes are
burnt or if the porcelain is broken or damaged.
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alpina AT2 72 HA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alpina AT2 72 HA in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info