Handleiding Alpina ABR 26 J (pagina 18 van 122) (Alle talen)

731916

Verklein

Vergroot

Pagina terug

1/122

Pagina verder

 16

A) TRAINING

1) Read the instructions carefully. Become ac-

quain ted with the controls and the proper use of

the machine. Learn how to stop the engine quickly.

2) Only use the machine for the purpose for which

it was designed, that is “-

mensions suitable for the length of the bar”

or wooden objects with the same characteristics.

Any other use may be dangerous and damage

the machine.3) Never allow children or persons

unfamiliar with these instructions to use the ma-

chine. Local regulations may restrict the age of

the operator.

4) The machine must never be used by more than

one person.

5) Never use the machine :

– when people, especially children or pets are in

the vicinity;

– if the user is tired or unwell, or has taken medi-

cine, drugs, alcohol or any substances which

may slow his reexes and compromise his

judgement;

– if the user is not capable of holding the ma chi ne

rmly with two hands and/or of remaining stan-

ding on the ground whilst working.

6) Remember that the operator or user is respon-

sible for accidents or hazards occurring to other

people or their property.

B) PREPARATION

1) Before using the machine, check its general

condition.

2) Always wear adequate clothing when using the

machine which do not hamper movements in any

manner.

– Always wear slim-tting protective clothing, t-

ted with shear-proof protection devices.

– Always wear protective gloves and eye-goggles

and safety anti-shear boots with non-slip soles.

– Always wear ear and hearing protection de-

vices.

– Never wear scarves, shirts, necklaces, or any

hanging or apping accessory that could catch

in the machine or in any objects or materials in

the work area.

– Tie your hair back if it is long.

3) Before starting your work, make sure that all the

protection devices are correctly tted.

C) OPERATION

1) Do not operate the engine in a conned space

where dangerous carbon monoxide fumes can col-

lect.

2) Work only in daylight or good articial light.

3) Take on a rm and well-balanced position:

– where possible avoid working on wet slippy

ground or in any case on uneven or ripid ground

which does not guarantee stability for the oper-

ator;

– avoid using unstable ladders or platforms;

– never run, but walk carefully paying attention to

the lay of the land and any eventual obstacles.

4) Check that when the machine is running idle,

there is no movement of the chain and, after pres-

s ing the throttle trigger, the engine quickly returns

to minimum speed.

5) Take care not to hit the bar hard against foreign

objects or ying debris caused by the movement

of the chain.

 

1) Keep all nuts, bolts and screws tightly fastened

to be sure the equipment is in safe working con-

dition. Routine maintenance is essential for safety

and for maintaining a high performance level.

2) Always wear protective gloves when handling

the cutting device.

3) Make sure the chain is well sharpened. Any

work on the chain and bar require specic experi-

ence and special tools. For safety purposes, we

recommend you contact your dealer to ensure

work is done correctly.

4) For safety reasons, never use the machine with

worn or damaged parts. Damaged parts are to be

replaced and never repaired. Only use original

spare parts. Parts that are not of the same quality

can seriously damage the equipment and com-

promise safety.

5) Store the machine out of the reach of children!

E) TRANSPORTATION AND HANDLING

  

operator’s hearing. If the operator is working in an

area where there is a risk of falling objects, a safety

helmet must also be worn.

4) Wear protective footwear and gloves!

5) Danger: objects thrown up by machine! Keep

people or animals at least 15 m away from the

machine during operation!

•) Work in an obstacle-free area, choosing the

most suitable tilt of the cutting unit in relation

to the ground. Make sure it is correctly tted on

the brush cutter.

•) Always work in stable, safe positions. Do not

work on stairs, steps and, in general, on surfa-

ces that are not perfectly stable.

•) The user must comply with any National Regu-

lations which can limit machine use.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Alpina ABR 26 J Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info