541411
20
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Product Description
6
Interim Local
Management
Interface (ILMI)
There is a MIB in the User-Network Interface (UNI) specification, ILMI,
which includes sufficient “managed objects” to allow you to control and
configure ATM nodes and terminals. As you will recall, the UNI simply
consists of ATM Forum-developed specifications which define the procedures
and protocols between a user and the ATM network.
ILMI is a link-level management and configuration protocol defined across
the UNI. It plays a vital role in the autoconfiguration of many ATM
parameters including, in particular, ATM addresses. The address registration
mechanisms of the ILMI allow ATM switches to allocate address prefixes to
ATM end systems, while ATM end systems supply the ATM switch with
their unique 48-bit MAC addresses.
Address Registration Using ILMI. One of the most useful features of
ILMI is address registration. This means that your switch can automatically
re-register its ATM addresses if the link goes down — and is reinstated.
Without ILMI address registration, if a link goes down the switch will
remove the addresses from its local Address Table.
The bottom line is that, with ILMI, you do not need to manually configure
ATM end systems with ATM addresses. This is very significant, not only
because ATM addresses are a very user-unfriendly 20 bytes of hexadecimal
symbols but, just as importantly, they allow network administrators to
control the allocation of addresses.
Two Modes Of Ethernet Switching
There are two popular methods to forward information: store-and-forward
and cut-through. Although your switch employs store-and-forward as the
default, you can also choose cut-through.
Store-and-forward Store-and-forward means that your switch stores the entire packet and then
forwards it.
Store-and-forward switching, performed at the MAC layer, allows your
switch to temporarily store packets until network resources, typically a
congested port, are available. Frames which are incorrect, an invalid CRC for
example, are discarded. Store-and-forward switching, therefore, ensures data
integrity, thus preventing network error conditions from being generated
throughout the network.
Store-and-forward mode is implemented when packets are converted to cells
on each ATM transmission.
Cut-through In a cut-through system, the device starts to forward the incoming packet
while the packet is still being received on the inbound link.
Cut-through switching requires software that can both look at the start of the
packet and determine which outbound link is to be used to forward the
packet. Cut-through does not check for errors before forwarding a packet.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allied Telesis AT-S16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allied Telesis AT-S16 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info