541393
62
Verklein
Vergroot
Pagina terug
1/197
Pagina verder
Parameter Description
Unit Choose the Switch ID number of the Switch in the switch stack to be modified.
VID (VLAN ID) Allows the entry of a VLAN ID in the Add dialog box,or displays the VLAN ID of an existing VLAN in the
Modify dialog box.VLANs can be identified by either the VID or the VLAN name.
VLAN Name Allows the entry of a name for the new VLAN in the Add dialog box,or for editing the VLAN name in the
Modify dialog box.
Advertisement Enabling this function will allow the Switch to send out GVRP packets to outside sources,notifying that they
may join the existing VLAN.
Type Displays the type of protocol associated with this VLAN.
Protocol ID The following parameters allow for the creation of protocol-based VLANs.The Switch supports 15 pre-
configured protocol-based VLANs plus one user-defined protocol based VLAN where the administrator may
configure the settings for the appropriate protocol and forwarding of packets (16 total).Selecting a specific
protocol will indicate which protocol will be utilized in determining the VLAN ownership of a tagged packet.
Pre-set protocol-based VLANs on the switch include:
port – Using this parameter will allow the creation of a normal 802.1Q VLAN on the Switch.
ip – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is based on the Ethernet protocol.
rarp – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the Reverse Address
Resolution (RARP) Pr
otocol.
ipx802dot3 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by Novell NetWare
802.3 (IPX - Internet Packet Exchange).
ipx802dot2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by Novell NetWare
802.2 (IPX - Internet Packet Exchange).
ipxSnap – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by Novell and the Sub
Network Access Protocol (SNAP).
ipxEthernet2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by the Ethernet
Protocol.
AppleTalk – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by the AppleTalk
protocol.
decLAT – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the Digital Equipment
Corporation (DEC) Local Area Transport (LAT) protocol.
decOther – Using this parameter will instruct the Switch to f
orward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by the Digital
Equipment Corporation (DEC) Protocol.
sna802dot2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol.This packet header information is defined by the Systems
Netw
ork
Ar
chitecture(SNA) 802.2 Protocol.
netBios – Using this parameter will instruct the Switch to f
orward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the NetBIOS Protocol.
xns – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the Xerox Network
Systems (XNS) Protocol.
vines – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the Banyan Virtual
Integrated Network Service (VINES) Protocol.
ipV6 – Using this parameter will instruct the Switch to f
orwar
d packets to this VLAN if the tag in the packet
header is concurrent with this protocol.This packet header information is defined by the Internet Protocol
Version 6 (IPv6) Protocol.
userDefined – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol defined by the user.This packet header information is defined by
entering the f
ollo
wing inf
ormation:
61
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allied Telesis AT-9724TS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allied Telesis AT-9724TS in de taal/talen: Engels als bijlage per email.

De handleiding is 8,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info