541354
17
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
USER GUIDE
Publication AP6822
Allen & Heath 2 ZED-14, 18 & 24 User Guide
Limited One Year Warranty
This product is warranted to be free from defects in materials or
workmanship for period of one year from the date of purchase by the
original owner.
To ensure a high level of performance and reliability for which this
equipment has been designed and manufactured, read this User Guide
before operating. In the event of a failure, notify and return the
defective unit to ALLEN & HEATH Limited or its authorised agent as
soon as possible for repair under warranty subject to the following
conditions
Conditions Of Warranty
The equipment has been installed and operated in accordance with the
instructions in this User Guide.
The equipment has not been subject to misuse either intended or
accidental, neglect, or alteration other than as described in the User
Guide or Service Manual, or approved by ALLEN & HEATH.
Any necessary adjustment, alteration or repair has been carried out by
ALLEN & HEATH or its authorised agent.
This warranty does not cover fader wear and tear.
The defective unit is to be returned carriage prepaid to ALLEN &
HEATH or its authorised agent with proof of purchase.
Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN &
HEATH agent for any additional warranty which may apply.
ZED-14, 18 & 24 User Guide AP6822 Issue 5
Copyright © 2007 Allen & Heath Limited. All rights reserved
Allen & Heath Limited
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com
This product complies with the European Electro magnetic Compatibility
directive 2004/108/EC and the European Low Voltage Directive 2006/95/EC.
This product has been tested to EN55103 Parts 1 & 2 1996 for use in
Environments E1, E2, E3, and E4 to demonstrate compliance with the
protection requirements in the European EMC directive 2004/108/EC.
During some tests the specified performance figures of the product were
affected. This is considered permissible and the product has been passed as
acceptable for its intended use. Allen & Heath has a strict policy of ensuring
all products are tested to the latest safety and EMC standards. Customers
requiring more information about EMC and safety issues can contact Allen &
Heath.
NOTE: Any changes or modifications to the console not approved by Allen
& Heath could void the compliance of the console and therefore the users
authority to operate it.
Allen & Heath 4 ZED-14, 18 & 24 User Guide
SAFETY INSTRUCTIONS
WARNINGS - Read the following before proceeding :
CAUTION
ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR
Read instructions: Retain these safety and operating instructions for future reference. Adhere to all warnings printed here
and on the console. Follow the operating instructions printed in this User Guide.
Do not remove cover: Operate the console with its covers correctly fitted.
Power sources: Connect the console to a mains power unit only of the type described in this User Guide and marked
on the rear panel. Use the power cord with sealed mains plug appropriate for your local mains sup-
ply as provided with the console. If the provided plug does not fit into your outlet consult your service
agent for assistance.
Power cord routing: Route the power cord so that it is not likely to be walked on, stretched or pinched by items placed
upon or against it.
Grounding: Do not defeat the grounding and polarisation means of the power cord plug. Do not remove or tam-
per with the ground connection in the power cord.
Water and moisture:
To reduce the risk of fire or electric shock do not expose the console to rain or moisture or use it in
damp or wet conditions. Do not place containers of liquids on it which might spill into any openings.
Ventilation: Do not obstruct the ventilation slots or position the console where the air flow required for ventilation
is impeded. If the console is to be operated in a rack unit or flightcase ensure that it is constructed to
allow adequate ventilation.
Heat and vibration: Do not locate the console in a place subject to excessive heat or direct sunlight as this could be a fire
hazard. Locate the console away from any equipment which produces heat or causes excessive vi-
bration.
Servicing: Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled
liquid, objects fallen into the openings, the power cord or plug become damaged, during lightning
storms, or if smoke, odour or noise is noticed. Refer servicing to qualified technical personnel only.
Installation: Install the console in accordance with the instructions printed in this User Guide. Do not connect the
output of power amplifiers directly to the console. Use audio connectors and plugs only for their
intended purpose.
!
WARNING: This equipment must be earthed.
Allen & Heath 5 ZED-14, 18 & 24 User Guide
SAFETY INSTRUCTIONS
TERMINAL WIRE COLOUR
European USA/Canada
L
LIVE BROWN BLACK
N
NEUTRAL BLUE WHITE
E
EARTH GND GREEN & YELLOW
GREEN
Important Mains plug wiring instructions
The console is supplied with a moulded mains plug fitted to the AC
mains power lead. Follow the instructions below if the mains plug has to
be replaced. The wires in the mains lead are coloured in accordance
with the following code:
!
The wire which is coloured Green and Yellow must be connected to the
terminal in the plug which is marked with the letter E or with the Earth sym-
bol. This appliance must be earthed.
The wire which is coloured Blue must be connected to the terminal in the
plug which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the
plug which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the
plug being changed.
8
2
General Precautions:
Damage : To prevent damage to the controls and cosmetics avoid placing heavy objects
on the control surface, scratching the surface with sharp objects, or rough
handling and vibration.
Environment : Protect from excessive dirt, dust, heat and vibration when operating and stor-
ing. Avoid tobacco ash, smoke, drinks spillage, and exposure to rain and mois-
ture. If the console becomes wet, switch off and remove mains power imme-
diately. Allow to dry out thoroughly before using again.
Cleaning : Avoid the use of chemicals, abrasives or solvents. The control panel is best
cleaned with a soft brush and dry lint-free cloth. The faders, switches and po-
tentiometers are lubricated for life. The use of electrical lubricants on these
parts is not recommended. The fader and potentiometer knobs may be re-
moved for cleaning with a warm soapy solution. Rinse and allow to dry fully
before refitting them.
Transporting : The console may be transported as a free-standing unit or mounted in a rack
or flightcase. Protect the controls from damage during transit. Use adequate
packing if you need to ship the unit.
Hearing : To avoid damage to your hearing do not operate any sound system at exces-
sively high volume. This applies particularly to close-to-ear monitoring such as
headphones and in-ear systems. Continued exposure to high volume sound
can cause frequency selective or wide range hearing loss.
Allen & Heath 6 ZED-14, 18 & 24 User Guide
CONTENTS
Thank you for purchasing your Allen & Heath ZED mixer. To ensure that
you get the maximum benefit from the unit please spare a few minutes
familiarizing yourself with the controls and setup procedures outlined in
this user guide. For further information please refer to the additional
information available on our web site, or contact our technical support
team.
http://www.allen-heath.com
http://www.allen-heath.com/zed
http://www.myspace.com/thezedspace
Warranty.............................................. 2
Packed Items ....................................... 3
Safety Instructions.............................. 4
Contents .............................................. 6
Panel Drawings ................................... 7
Introduction to ZED-14, 18 & 24... 10
Specifications....................................... 11
Dimensions.......................................... 12
Block Diagram .................................... 13
Mono Input Channel ......................... 14
Stereo Input Channel ST1................ 17
Stereo Input Channel ST2, 3 & 4.... 19
Master Section.................................... 20
USB Connection................................. 22
SONAR LE software introduction. 23
Configuring SONAR LE with ZED. 24
Configuration with PT9 on a Mac.. 25
Application Information—Live........ 26
Application Information—Studio ... 27
Using USB for effects ........................ 28
Wiring Notes...................................... 29
Product Support................................. 30
Allen & Heath 7 ZED-14, 18 & 24 User Guide
PANEL DRAWINGS
AC MAINS IN ~
100 - 240V~ 47-63Hz 40W MAX
T630mA L 250V 20mm
FUSE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REPLACE FUSE WITH SAME TYPE AND RATING.CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTION: REMPLACER PAR UN FUSIBLE STRICTEMENT IDENTIQUE EN VALEURS.
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
ALLEN&HEATH
OFF
0 I
ON
WARNING: THIS APPARATUS MUST BE EARTHED
Serial No.
ENGINEERED IN ENGLAND BY ALLEN & HEATH LIMITED. MADE IN CHINA.
(2) this device must accept any interference received,
This device complies with Part 15 of the FCC Rules.
(1) this device may not cause harmful interference, and
Operation is subject to the following two conditions:
including interference that may cause undesired operation.
OO
30
OO 10
-30
-20
-5
0
5
-10
ST
RTN
To LR
To 7-8
OO 10
-30
-20
-5
0
5
-10
2TRK
RTN
OO 10
-30
-20
-5
0
5
-10
USB
RTN
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
MUTE
PK !
PFL
L
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
R
PFL ACTIVE
MIN MAX
PHONES
AUX1
AUX2
2TRK RTN
USB RTN
STEREO
OO +6
ALT
OUT
MONITOR
LR
OO +6
AUX1
MASTER
OO +6
AUX2
MASTER
5
20
10
5
0
10
ON
To LR
To 9-10
ON
To LR
To 11-12
ON
ST3
USB
AUX1-2
AUX 3-4
LR PRE
UP=LR post
SENDRETURN
LR
BAL
=
MUTE
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST2
MUTE
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST1
MUTE
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
POST
PRE
LR
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
STEREO
ST4
ST2 IN
L/M
R
ST3 IN
L/M
R
L/M
R
L
R
POWER
48V
INSERT R
AUX1 OUT
PHONES
MAIN OUT
INSERT
6
ST RTN
L
R
2TRK RTN
L
R
REC OUT
L
R
ALT OUT
L
R
INSERT
5
INSERT
4
INSERT
3
INSERT
2
INSERT
1
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
1234567-89-1011-1213-14 RL
0
0
0
PHANTOM POWER
ALLEN HEATH
LINE LINE LINE LINE LINE LINE
MIC MIC MIC MIC MIC MIC
ST4 IN
ST1 IN
L/M
R
AUX2 OUT
AUX3 OUT
AUX4 OUT
INSERT L
MONO OUT
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
POST POST POST POST POST POST POST POST POST POST
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
&
Allen & Heath 8 ZED-14, 18 & 24 User Guide
PANEL DRAWINGS
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
1
1
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
2
2
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
3
3
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
4
4
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
5
5
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
6
6
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
7
7
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
8
8
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
INSERT
9
9
LINE
MIC
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
MF
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
10
10
LINE
MIC
500
1k
3k
POST
10
-30
-20
-5
0
5
-10
ST
RTN
To LR
To CH
ON
-30
-20
-5
5
0
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST1
MUTE
ST RTN
L
R
11-12
ST1 IN
L/M
R
POST
OO
30
5
10
20
5
0
10
O
10
-30
-20
-5
0
5
-10
2 TRK
RTN
To LR
To CH
ON
-30
-20
-5
5
0
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST2
MUTE
13-14
POST
OO
30
5
10
20
5
0
10
10
-30
-20
-5
0
5
-10
USB
RTN
To LR
To CH
ON
-30
-20
-5
5
0
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST3
MUTE
15-16
POST
OO
30
5
10
20
5
0
10
OO
30
MUTE
PK !
PFL
L
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
R
PFL ACTIVE
MIN MAX
PHONES
AUX1
AUX2
2TRK RTN
USB RTN
STEREO
+6
ALT
OUT
MONITOR
LR
+6
AUX1
MASTER
+6
AUX2
MASTER
5
20
10
5
0
10
USB
AUX1-2
AUX 3-4
LR PRE
UP=LR post
SENDRETURN
LR
BAL
=
POST
PRE
LR
-30
-20
-5
5
0
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
+6
AUX1
PRE
+6
AUX2
PRE
+6
AUX3
+6
AUX4
POST
STEREO
ST4
L/M
R
L
R
POWER
48V
INSERT R
AUX1 OUT
PHONES
MAIN OUT
ALT OUT
L
R
17-18 RL
0
0
0
PHANTOM POWER
ALLEN HEATH
ST4 IN
AUX2 OUT
AUX3 OUT
AUX4 OUT
INSERT L
MONO OUT
POST
OO
30
5
10
20
5
0
10
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
2TRK RTN
L
R
ST 2 IN
L/M
R
REC OUT
L
R
ST 3 IN
L/M
R
INSERT
&
AC MAINS IN ~
100 - 240V~ 47-63Hz 26W
T1A L 250V 20mm
FUSE
ALLEN&HEATH
OFF
0
I
ON
Serial No.
ENGINEERED IN ENGLAND BY ALLEN & HEATH LIMITED. MADE IN CHINA
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REPLACE FUSE WITH SAME TYPE AND RATING.CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTION: REMPLACER PAR UN FUSIBLE STRICTEMENT IDENTIQUE EN VALEURS.
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WARNING: THIS APPARATUS MUST BE EARTHED
(2) this device must accept any interference received,
This device complies with Part 15 of the FCC Rules.
(1) this device may not cause harmful interference, and
Operation is subject to the following two conditions:
including interference that may cause undesired operation.
Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan
Apparatet må tilkoples jordet stikkontakt
Apparaten skall anslutas till jordat uttag
CET APPAREIL DOIT ETRE MIS A LA TERRE
Conforms to ANSI/UL Std. 60065-2003
Cert to CAN/CSA Std. C22.2 No 60065-03
ZED1802
Allen & Heath 9 ZED-14, 18 & 24 User Guide
PANEL DRAWINGS
OO
30
OO 10
-30
-20
-5
0
5
-10
ST
RTN
To LR
To CH
OO 10
-30
-20
-5
0
5
-10
2TRK
RTN
OO 10
-30
-20
-5
0
5
-10
USB
RTN
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
MUTE
PK !
PFL
L
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
R
PFL ACTIVE
MIN MAX
PHONES
AUX1
AUX2
2TRK RTN
USB RTN
STEREO
OO +6
ALT
OUT
MONITOR
LR
OO +6
AUX1
MASTER
OO +6
AUX2
MASTER
5
20
10
5
0
10
ON
To LR
To CH
ON
To LR
To CH
ON
ST3
USB
AUX1-2
AUX 3-4
LR PRE
UP=LR post
SENDRETURN
LR
BAL
=
MUTE
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST2
MUTE
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
BAL
=
PK !
PFL
STEREO
ST1
MUTE
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
POST
PRE
LR
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
STEREO
ST4
ST2 IN
L/M
R
ST3 IN
L/M
R
L/M
R
L
R
POWER
48V
INSERT R
AUX1 OUT
PHONES
MAIN OUT
INSERT
16
ST RTN
L
R
2TRK RTN
L
R
REC OUT
L
R
ALT OUT
L
R
INSERT
15
INSERT
14
INSERT
13
INSERT
12
INSERT
11
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
100Hz
12kHz
-15
+15
HF
-15
HM
+15
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
11 12 13 14 15 16 17-18 19-20 21-22 23-24 RL
0
0
0
PHANTOM POWER
ALLEN HEATH
LINE LINE LINE LINE LINE LINE
ST4 IN
ST1 IN
L/M
R
AUX2 OUT
AUX3 OUT
AUX4 OUT
INSERT L
MONO OUT
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
-15 +15
80Hz
LF
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
120Hz 4k
200
2k
650
500
1k
3k
POST POST POST POST POST POST P OST POST POST POST
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
OO
30
5
10
20
5
0
10
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
10
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +1 5
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
9
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
8
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
7
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
6
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
5
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
4
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
3
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
2
500
1k
3k
POST
OO
30
-6-10 63 26
GAIN
MIC
0
LINE
10
0
10
20
30
40
50
100Hz
12kHz
-15
+15
HF
120Hz 4k
200
2k
650
-15
HM
+15
-15 +15
80Hz
LF
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
MUTE
1
500
1k
3k
POST
INSERT
10
LINE
INSERT
9
LINE
INSERT
8
LINE
INSERT
7
LINE
INSERT
6
LINE
INSERT
5
LINE
INSERT
4
LINE
INSERT
3
LINE
INSERT
2
LINE
INSERT
1
LINE
MIC
PFLPFLPFLPFLPFLPFLPFLPFLPFLPFLPFL
&
MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC
AC MAINS IN ~
100 - 240V~ 47-63Hz 40W MAX
T630mA L 250V 20mm
FUSE
REFER SE RVICING TO QU ALIFIED SERVICE PER SONNEL.
REPLACE FU SE WITH SAM E TYPE AND RATING.CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTIO N: REMPLACER PAR UN FUS IBLE STRICTEMENT IDENTIQ UE EN VALEURS.
DO NOT OPEN
CAUTION
RISK OF EL ECTRIC SHOCK
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WARNING: TO REDUCE THE RI SK OF ELECTRIC SHOCK DO NOT EXPOSE THI S APPARATUS TO RAIN OR MOISTURE.
ALLEN&HEATH
OFF
0
I
ON
WARNING: THIS APPARATUS MUST BE EARTHED
Serial No.
ENGINEER ED IN ENGLAND BY ALLEN & HEATH LIMITED.
(2) this dev ice must accept an y interference received,
This device complies with Part 15 of the FCC Rules.
(1) this device may not c ause harmful interference, and
Operation is subjec t to the following two conditions:
including inter ference that may cause undesired operation.
Allen & Heath 10 ZED-14, 18 & 24 User Guide
INTRODUCTION TO THE ZED-14 & 24
The following is a technical overview of ZED, if you want to, please skip to the next section.
The Allen & Heath ZED series mixers have been carefully and lovingly designed in the beautiful county of Cornwall in the UK
and is manufactured alongside a wide range of professional audio mixing consoles. Many of the components used in ZED are
exactly the same as in the larger Allen & Heath products and the construction methods are also very similar — utilising individ-
ual vertically mounted channel circuit boards with each rotary control fixed with a metal nut to the front panel. This provides a
very robust product that will resist damage and give years of reliable use. It also makes servicing much easier should it be re-
quired, with the ability to remove one particular channel from the mixer at a time, or easily change a fader.
The audio circuitry is based on years of continual development and refinement , the performance of all the elements within the
mixer scrutinised and perfected to ensure the very best sound quality possible.
Multi-application:
ZED’s are great for live mixing! Their layout makes them very easy to use and the 100mm faders give much better control of
the mix compared to most products at a similar price.
They are also great for recording, either a live show or an audio project at home can be built up track by track and studio
monitor speakers can be fed from the Alt Outputs.
ZED mixers are also ideal for teaching establishments, houses of worship, hotels and conference centres where their ease of
use and robust qualities make them a top choice.
Mic/Line Pre-amps:
Based on the pre-amps from the PA series, the ZED-14, 18 & 24 pre-amps use a two stage design, with carefully controlled
amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge — 69dB of range to be
exact — and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes
from the first stage, so unwanted noise is kept to a minimum. There is no “pad” switch, or pad circuit — line level signals are
simply plugged into the second stage of the pre-amp by using the line input jack socket. This has the great advantage of lower
noise when using the line input. (It is common to attenuate line level signals, the amplify them back up again which can give
more noise or hiss).
EQ:
The ZED series mixers are equipped with a 3-band equaliser circuit on each mono input and a 2-band EQ on the stereo chan-
nels. The frequency and response of each has been carefully chosen to give the maximum performance when using the EQ on a
variety of sources.
AUX system:
Four auxiliary buses are provided, two pre-fade and two post fader. Auxes 1 & 2 have master level controls. The auxes can be
sent to the USB output for either recording or effects purposes and Auxes 1 & 2 can be configured as a stereo pair, with sends
on the stereo channels switched either mono or stereo.
Mono and Stereo Channels:
One of the great things about the ZED series is the number and variety of things you can plug in. In addition to the mono
channels there are four stereo channels, each with a main stereo input on jack sockets, three of them have the ability to take
additional stereo inputs from phono sockets or from the USB audio input, flexibility gives you control.
USB:
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way we
have implemented this on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your com-
puter to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED,
select the USB routing on the mixer and the device on your computer and that’s it! Quality audio to and from your PC or
MAC.
As you can tell, we’re very proud of this product we hope you like it too.
Allen & Heath 17 ZED-14, 18 & 24 User Guide
STEREO INPUT CHANNEL ST1
Stereo Return ON switch
This switches the signal on when pressed in. Leaving the switch in
the up position is recommended when the stereo return input is
not in use to minimise unwanted noise being passed through.
Stereo Return Phono sockets
This is an additional stereo input to the main stereo channel input
(below). The gain is varied by the ST RTN control and this input can
be sent to either the stereo channel or straight to the L R main bus,
depending on the setting of the under-panel switch. These inputs
are unbalanced.
Stereo Return Level control
Adjusts the level of the stereo return input from off (fully attenu-
ated) to maximum where it has 10dB of gain.
Stereo Routing selector switch
This switch selects whether the Stereo Return signal is sent to the L
R bus directly, or the stereo channel 1. When it is pressed in, the
Stereo Return signal sums together with the main stereo input.
Stereo 1 input jack sockets
Standard 1/4” jack sockets for line level stereo signals. Can be used
with a mono input where the L/M input will also connect to the R
input if nothing is plugged in to R.
The Stereo 1 inputs accept unbalanced or balanced signals.
Stereo 1 Level control
Adjusts the level of the ST1 input. The range is from off to +10dB.
Stereo Channel EQ
The Stereo Channel EQ is 2 band with corner frequencies of 12kHz
for the HF and 80Hz for the LF.
10.00 Hz 100.00 1000.00 10000.00 30000.00
-20.00
-15.00
-10.00
-5.00
0.00
5.00
10.00
15.00
20.00
dBr
OO 10
-30
-20
-5
0
5
-10
ST
RTN
To LR
To 7-8
ON
-30
-20
-5
5
0
OO
-10
10
IN
-15 +15
12kHz
HF
-15 +15
80Hz
LF
ST1
R
T
ST RTN
L
R
ST1 IN
L/M
R
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath ZED18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath ZED18 in de taal/talen: Engels als bijlage per email.

De handleiding is 16,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info