541369
12
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
Allen & Heath 12 XONE:DB4 User Guide
FILTERS
2
3
1
The XONE:DB4 is equipped with a dual, swept filter system, that emulates the analogue filters that
have been a key feature on most XONE products. The filters can be used as a mix tool, or to create
dynamic effects. Each music channel has a 3-position toggle switch allowing the channel to be routed
to either one of the two filter systems, or directly to the mix.
On power up the filters always default to Low-Pass, but any combination of the three filters types can
be achieved by simultaneously pressing the filter type buttons. The frequency sweep control sets the
cut-off point of the filter, and the resonance alters the Q. A flat frequency response is achieved when
the Frequency Sweep control is fully clockwise (LPF) or fully anticlockwise (HPF), with the Resonance
control set to its midpoint.
4
5
6
Resonance Control
This produces the classic analogue VCF sound by feeding some of
the filter output back to its input. The control ranges from ‘mild’
producing a very subtle effect, to ‘wild’ producing a dramatic phase
effect.
1
HPF Button
Turns on the high pass (bass cut) filter slope. The button will
illuminate when selected.
2
BPF Button
Turns on the band pass (bell shaped) filter slope. The button will
illuminate when selected.
3
LPF Button
Turns on the low pass (treble cut) filter slope. The button will
illuminate when selected.
4
Frequency Sweep Control
This control sets the cut-off frequency of the filter. It ranges from
very low frequency (20Hz) to very high (20kHz).
5
Filter On Switch
Switches the filter on and off. The button will illuminate when selected.
6
ADVANCED BUTTON MODES
Any frequency band select button ([2], [3] and [4]) can be momentarily selected along with the currently
active band. To do this, hold down the button of the band that is currently active and then press the but-
ton of the band to be momentarily selected. Multiple filter bands may be selected by pressing the band
buttons simultaneously. Releasing the band buttons simultaneously will store the selection.
To turn on the filter, press the relevant FILTER ON switch
[6].
This switch has two modes of
operation, latching and momentary. To latch the switch ON, tap once. To briefly switch ON a
filter, press and hold the button; the filter will turn off on release. This function also works the
other way, so if a filter is ON, pressing and holding the button will turn the filter off until the but-
ton is released.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath Xone DB4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath Xone DB4 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info