541346
11
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
WZ16:2DX
AND
WZ12:2DX U
SER
G
UIDE
11
NO USER SERVICEABLE PARTS INSIDE.
SUPPLY VOLTAGE RANGE:
100 - 240V
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
47-63Hz ~ 30W MAX
WARNING - THIS APPARATUS MUST BE EARTHED.
REFER TO USER GUIDE BEFORE CONNECTING SUPPLY
TO REDUCE THE RI SK OF FI RE OR ELECTRI C SHOCK
DO NOT EXPOSE THI S APPARATUS TO RAIN OR MOISTURE.
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
REPLACE FUSE WITH SAME TYPE AND RATING
WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
100 - 240V~ T500mA 250V 20mm
CAUTION
FUSE
OF F
AC MAINS IN ~
ON
~
Connecting Mains Power
Refer to the
SAFETY WARNING
on page 5 of this Guide.
Check that the correct mains lead with moulded plug has been
supplied with your console. Read and understand the warnings
and instructions printed on the rear panel and reproduced here.
The power supply accommodates mains voltages within the
range 100-240V without changing any fuses or settings.
It is standard practice to turn connected power amplifiers down
or off before switching the console on or off. Ensure that the
IEC mains plug is pressed fully into the rear panel socket before
switching on.
E
ARTHING
The connection to earth (ground) in an audio system is important for two reasons:
1.
SAFETY
- To protect the operator from high voltage shock associated with the AC mains supply
feeding the system, and
2.
AUDIO PERFORMANCE QUALITY
- To minimise the effect of earth (ground) loops which result
in audible hum and buzz, and to shield the audio signals from interference.
For safety it is important that all equipment earths are connected to mains earth so that exposed
metal parts are prevented from carrying high voltage which can injure or even kill the operator. It is
recommended that the sound engineer check the continuity of the safety earth from all points in the
system including microphone bodies, guitar strings, multicore cases, equipment panels ...
The same earth is also used to shield audio cables from external interference such as the hum
fields associated with power transformers, lighting dimmer buzz, and computer radiation. Problems
arise when the signal sees more than one path to mains earth. An ‘earth loop’ (ground loop)
results causing current to flow between the different earth paths. This condition is usually detected
as a mains frequency audible hum or buzz.
To ensure safe and trouble-free operation please observe the following:
x
Do not remove the earth connection from the console mains plug.
The console chassis is
connected to mains earth through the power cable to ensure your safety. Audio 0V is connected to
the console chassis internally. If problems are encountered with earth loops operate the audio
‘ground lift’ switches on connected equipment accordingly, or disconnect the cable screens at one
end, usually at the destination. It is useful to carry ground lift cable adapters such as short XLR
male to female leads with pin 1 disconnected.
x
Avoid running audio cables next to mains, computer or lighting cables,
or near thyristor
dimmer and power supply units. If unavoidable, cross these at right angles.
x
Use low impedance sources
such as microphones rated at 200 ohms or less to reduce
susceptibility to interference. The console outputs are designed to operate at very low impedance
to minimise interference problems.
x
Use balanced connections where possible
as these provide further immunity by cancelling
out interference that may be picked up on long cable runs. To connect an unbalanced source to a
balanced console input, link the cold input (XLR pin 3 or jack ring) to 0V earth (XLR pin 1 or jack
sleeve) at the console. To connect a balanced console output to an unbalanced destination, link
the cold output to 0V earth at the console.
x
Use professional quality cables and connectors
and check for correct wiring and reliable
solder joints.
x
If you are not sure ...
Have your system checked by a competent engineer, or contact your
local Allen & Heath agent for advice.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath WZ16 mixwizard bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath WZ16 mixwizard in de taal/talen: Engels als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Allen-Heath WZ16 mixwizard

Allen-Heath WZ16 mixwizard Gebruiksaanwijzing - Deutsch - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info