541378
24
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
24 WZ20S User Guide
CONSOLE MONITOR SYSTEM The WZ20S provides
extensive console monitoring facilities to satisfy a wide range of
applications including broadcast and club mixing. Every signal can be
monitored individually or within any mix. Two systems are provided,
headphones and local monitor. Two sets of headphones may be
connected at the same time. The local monitor can be used to feed a
stereo booth, stage or studio speaker system. The PFL (Pre Fade
Listen) system lets you quickly check channel signals and correctly set
gain.
MONITOR / MIX2 METERS A pair of meter bars displays the level of
the selected monitor source or PFL. With all selector switches up
these default to display the post-fader left and right output levels of
stereo MIX2. When SPLIT PFL is selected the left meter displays the
active PFL signal, the right displays the switch bank source in mono.
Each meter has 12 LEDs to indicate signal levels from as low as 30dB.
Green and yellow LEDs indicate normal operating levels. The top red
LED lights at +16dB to warn that you are within 5dB of clipping. Meter
‘0’ represents +4dBu at the XLR outputs. The meters are peak
responding. This means that they have a fast attack and are able to
display fast transients accurately.
PFL A large red LED lights when a channel PFL is selected. This
indicates that the selected channel PFL signal is heard in the
headphones and displayed on the monitor meters. PFL also overrides
the local monitor if PFL ENABLE has been selected.
It is important to use PFL to set the channel gains correctly to maintain
the wide dynamic range achievable with this console. If set too high
then the signal may clip resulting in a harsh distorted sound. If set too
low then the signal-to-noise ratio is reduced and residual hiss may be
heard. You should adjust the channel gain so that the signal averages
‘0’ on the monitor meters with highest peaks no more than ‘+6’.
HEADPHONES LEVEL Adjusts the level of the signal in the stereo
headphones. This does not affect the level of the local monitor. Heed
the warning printed on the previous page regarding loud listening
levels.
MONITOR SOURCE SELECTOR A 9 way switch bank is used to
select which signal is heard in the headphones, local monitor and
displayed on the meters. This defaults to post-fader MIX2 signal with
all switches up. Press the required switch to monitor MIX1, AUX1 to 6,
or EXT IN 1(2). PFL automatically overrides the selected source.
Press a related pair of Aux switches to monitor them in stereo, for
example AUX5 on left, AUX6 on right. Press a single AUX switch to
check it in mono.
Switch priority is PFL overrides AUX1/2 overrides AUX3/4 overrides
AUX5/6 overrides EXT1 overrides EXT2 overrides MIX1 overrides
MIX2. For example you can select MIX1 as your source, then press
EXT1 to check a recording level without having to first deselect MIX1.
010
EXT1
EXT2
MIX1
ALL UP =
MIX2
AUX1
AUX3
AUX2
AUX5
AUX4
AUX6
5-6
6
4
5
2
3
3-4
1-2
1
-3
MONITOR
6
R
5
4
2
1
3
PFL
L
-12
-20
-30
-16
-9
-6
LEV
8
9
7
PRG
+3
0
+6
PFL
+9
+16
SPLIT PFL
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath MixWizard Series WZ20S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath MixWizard Series WZ20S in de taal/talen: Engels als bijlage per email.

De handleiding is 4,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info