541356
27
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
26
THE MUTE SYSTEM
Each GL4000 input channel, group, aux send and main output (L,R,M) is provided with
a mute switch. This turns the audio signal on or off.
The GL4000 provides a 'soft' mute system controlled by a built-in microprocessor which
gives far greater control and versatility than the conventional systems found in other
consoles. A ramped FET audio element on each channel provides silent muting under
control of the microprocessor. The red LED in the mute switch always indicates the
status of the channel (illuminated = muted, off = not muted). A green SAFE/PREVIEW
LED under each mute switch indicates which channels have been made 'safe', or which
channels are selected within a group or patch.
OPERATIONAL FEATURES
MANUAL MUTING - Press a mute switch to turn a channel on or off. The
switch cap illuminates if the channel is muted. You can also turn off (clear)
or turn on (set) all the console mutes with a single key press..
8 MUTE GROUPS - Combine selected mutes under control of a master
pushbutton. Includes a preview function to check group settings before
selection. Individual channels can be made 'safe' so that they are not
affected by the groups. If not used the group section can be disabled to
prevent accidental operation.
128 MUTE PATCHES - Store and recall the console mute settings in
numbered patches. Includes 3 digit display, preview function, channel
'safes', and disable.
MIDI INTERFACE - In, out and through sockets to interface with external
sequencers, effects and control devices. Includes MIDI dump to archive
and recall console settings.
QUICKSOLO - Check the contribution of individual signals within the
main mix 'in place' by pressing the associated mute switches. Includes a
separate 'safe' facility so that selected channels are not muted when solo
is activated. A two key 'press and hold' prevents accidental operation. The
last solo setting can be recalled for instant comparison with the mix.
QuickSolo can be disabled if required.
POWER UP AND POWER DOWN
The mute settings are remembered when power is removed
from the console. A power down circuit detects falling
voltage and writes the settings to non-volatile memory. On
power up these settings are restored. The mute group,
patch, channel safes, and mode settings are held in similar
memory.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath GL 4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath GL 4000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info