693657
47
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
8 Getting In Deeper: Recording
45
Watch Your Levels While Recording
A basic principle in digital recording is that you want to capture the
loudest signal you can, but at the same time you never, ever want
to exceed the maximum digital threshold. If you do, you’ll
introduce the nasty distortion known as “digital clipping” into your
recording.
Your Alesis IO provides a number of methods to help you avoid
digital clipping:
1. 24-bit recording - Operating at 24 bits, the IO offers 256
times more resolution than that of 16-bit compact disks.
One result of that increased resolution is that you have far
more headroom to work within. You can easily record such
that your loudest peaks for an unpredictable player are no
greater than -12dBfs to -18dBfs. (“dBfs” stands for “decibels
at full scale”. In digital, once you reach full scale, you’re using
all of the available resolution. Attempting to record at
greater than 0dBfs results in digital clipping.)
2. Dedicated hardware metering of digital signal - The
meters on the front panel of the IO show your audio signal
as it is seen by the digital converters. In other words, they’re
totally accurate, unlike analog meters which only approximate
the digital signal strength.
3. Dedicated input monitoring panel - In the HDM
application, there is a special tab for Input Monitoring. This
tab provides an uncluttered view of the strength of your
incoming signals. (Note that the tab is always in “narrow”
view to provide a quick overview of all the channels.)
4. Pre-fader level monitoring - Again in the HDM application,
all metering is always “pre-fader.” That means that the
metering shown to you is independent of how you set the
volume sliders. This allows you to see your actual signal
strength even as you’re creating various custom mixes for the
people you are recording.
If you haven’t experienced
digital clipping before, spend
a moment to learn what it
sounds like. Plug a
microphone or line level
source into your IO. In the
HDM panel, turn up the fader
for that channel in an
appropriate output tab. Be
sure that the “Direct Mon”
slider towards the right is
turned up as well. You want
to hear your audio.
Watch the HDM panel
metering, and turn up the
IO’s preamp until you’re
registering signals near the
top of the scale. Then, go just
a bit further. Notice the
harsh, buzzing kind of
distortion that appears. This
distortion is digital clipping.
It can ruin your recordings
and should be avoided at all
costs (unless you want it as a
special, unmusical effect).
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alesis IO14 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alesis IO14 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Alesis IO14

Alesis IO14 Snelstart handleiding - Deutsch, English, Français, Italiano - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info