803216
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
INSTALLATION
Power supply:
The baby unit (camera) is powered by the
included 5V power adaptor with the straight
(micro USB) plug.
Make sure that the baby can’t touch the wire of the baby unit
or the adaptor cord. Place the
baby unit at least 1-1.5 meters
away from the baby and bundle
excess cable lengths using tape or

this purpose.
The parent unit (monitor) is powered by the
permanently installed and non-exchangeable
battery. This battery is recharged by connect-
ing the supplied 5V power adaptor with the
perpendicular (micro USB) plug to the rear of
the parent unit.
Insert the power adaptors into a 230V wall outlet.
Only use the supplied power adaptors with the




The specications of both adaptors are identical. That’s
why it won’t cause any problems when accidentally
interchanging the adaptors.
SCREEN SYMBOLS


Signal strength:

strong reception
good reception
average reception
poor reception
no reception
Sound:
sound is enabled
Attention, this doesn’t indicate the set volume
X sound is disabled (volume set to 0)
Attention, when disabling the sound while the VOX
function is active (for this, see ‘menu operated
functions’), the speaker symbol will keep indicating that
the sound is enabled
Lullabies


Feeding timer:

in the lower right corner of the screen
Temperature alert:
the temperature alert is enabled
Temperature:
(‘22’ is an example)
Indicates the temperature in the room where the baby unit
is situated; take into account a possible tolerance of ± 1.5
degrees
23:07:25 (‘23:07:25’ is an example)
The time is displayed in the upper right corner of the screen.

Battery:

battery full



󰀨

alert tones will sound for approximately 20 to 30 minutes.

󰀨
Zoom function:

USE
BABY UNIT:
Switching on/o󰀨:
 button at the front of the baby unit to
switch on the baby unit. The indicator directly underneath the
 button again to
󰀨󰀨
The baby unit switches on automatically when connecting the
power adaptor.


then completely to the right and then fully down and up. Final-

The arrow buttons on the parent unit allow you to aim the
camera at the desired spot.
Automatic night vision:


dark and will switch of again when it becomes light.
The LEDs can illuminate objects up to a distance of
approximately 3-5 meters.
When it’s dark, that is when the night vision LEDs are
switched on, the images on the parent unit will be
displayed in black and white.
Attention: infra-red light cannot be perceived by the
human eye; that means you cannot tell whether the
infra-red LEDs are switched on with the naked eye.
PARENT UNIT:
Switching on/o󰀨:
Press and hold button for 3 seconds to switch the parent
󰀨
Volume:
  
volume.

󰀨
 X symbol appears when the
sound is disabled.
Sound indicators:

whether the baby is crying. In this way you can also monitor
󰀨
baby monitor is located a bit further away in the room.
To talk back:
Press the button to talk back to your baby. Keep the button
depressed for as long as you’re speaking and release the
button to listen.


While using the talk-back function, the icon appears
in the screen.
Display o󰀨 (parent sleep mode):
If the display brightness of the parent unit on your bedside
󰀨
by pressing the button. The sound remains enabled.

See the section ‘VOX’ to automatically switch o the
screen + sound when the baby is sleeping and to
switch them on again as soon as the baby starts crying
Pan/tilt:
Press and hold the   or button to aim the camera to

The sound is disabled while orienting the camera of the
baby unit.
ZOOM: (enlarging)
 
button again to restore the normal view.

screen when this function is enabled.
MENU OPERATED FUNCTIONS
 button.
Use the navigation button   or to select the desired
option. Press the OK button to open the selected option.
Lullabies:
    or to select the
‘Lullabies’ option and press the OK button
   or button to select the desired lullaby or
OK
button
3. Press 2x the button to leave the menu and to return to
the normal screen or wait for 10 seconds until this happens
automatically
Playback of the lullabies is stopped automatically after
approximately 20 minutes. You may also open the
menu and select STOP to stop playing the songs earlier.
At the bottom of the menu you also have the option to
adjust the playback volume of the lullabies at the baby
unit.
Keep in mind that the sound of the lullaby is returned to
the parent unit via the microphone of the baby unit. In
this case, you may want to set the sound of the parent unit to
level 0 (= sound o).
As soon as and for as long the lullabies are being
played, the symbol appears at the top in the display.
View:

you may use this menu to select which view must be dis-
played in the screen.
    or to select the
‘View’ option and press the OK button
 or button to select which camera you’d like to

5 seconds one after the other and press the OK button
Attention: The unit does NOT automatically switch to a
camera where sounds are being detected.
Temperature:
This menu allows you to input a minimum and maximum value
󰀨

    or to select the
‘Temperature’ option and press the OK button
  
‘Low Temperature’ for the minimum temperature

set these options with the or button


‘OFF’ to disable the temperature alert

press the OK button to select this setting
3. Press 2x the button to leave the menu and to return to
the normal screen or wait for 10 seconds until this happens
automatically.
DVM-275
USER’S MANUAL
INTRODUCTION



have the baby monitor switch on.

foil from the parent and baby unit.
About this users manual:

always adhere to the instructions described in this
documentation.
This symbol is followed by a user’s tip.

this user’s manual.
DECLARATION OF CONFORMITY


-




Press and hold for 3 seconds to switch the parent unit on
󰀨
󰀨
again to switch the display back on.


press  and repeatedly to increase or decrease the
volume
press and hold to move the camera up or down (tilt
function)

press  and repeatedly to select the desired setting

press and hold to move the camera left or right (pan
function)

press  and repeatedly to select the desired setting
BABY UNIT:

󰀨

register the baby unit on the
parent unit. See the related
instructions further on in this
manual.
Parent unit table stand:

the stand at the rear of the device.
Baby unit wall mount:
” tripod nail

bracket to place the baby unit in a higher position or to mount

FUNCTION OVERVIEW
PARENT UNIT:


step.

press again to restore the normal view.

selected setting.

12 5
3
109
8
OK
OK
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DVM-275 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DVM-275 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1.45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info