It might happen that the camera of the smartphone or tablet is not able to read
the QR code. In this case, press ‘Cannot use QR code’ in the bottom of the
screen. In the eld UID, enter the UID code marked on the QR code sticker and
then enter the password “admin”.
The camera is registered successfully when the image appears. Now press
Camera Settings and select Change the password and assign a unique
password to the camera. This is required for secure use of your camera.
Note: Basically none of the routers in Europe support the SmartCong option (at
the time of writing this user manual), which is why this option has no function.
3. CAMERA POSITIONING.
The camera may be placed on any horizontal surface. You may also mount the
camera to a wall using the supplied wall bracket.
Attention: Make sure the camera is already registered to the Wi-Fi network.
When the camera is installed and then connected to the mains, it’ll re-establish
the connection with the network. Please rst check whether a proper connection
can be established with your Wi-Fi router.
4 RESET.
When contact with the camera is no longer possible and you can no longer
determine what the IP address or the port number no longer corresponds, you
can externally reset the camera to restore the default factory settings.
At the rear of the camera you’ll nd a small hole marked ‘reset’. Use a pointy
object such as a paperclip to press the button inside this hole.
Press this button while the camera is starting up and keep it depressed for at
least 10 seconds.
The camera can now only be reached via Wi-Fi Direct. Now follow the
registration process, see 2.3.
