548851
10
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
2
LCD Language:
Depending on the purchased version, the LCD language might not be
English on start-up. Please see chapter 4.3 on page 8 how to change the
language of your DBX-88 eco.
1 ECO MODE
This Alecto DBX-88 ECO babyphone is equipped with an unique ECO
mode. Already in normal operation mode, the baby-unit stops transmis-
sion when the baby is not crying. In Full Eco mode it even suppresses
the controlling signals between the baby-unit and the parent unit, so no
transmitting at all.
Next to the Full eco mode, you can set the output power. In case you are
at home with your baby not far away, you can set the babyphone in half
range mode, with low transmitting power and reduced power consump-
tion. In case the baby is not close to you, you may switch to full range.
Attention: once the baby produces noise, the baby-unit is activated and
contacts the parent unit. This causes a small delay which means that
short sounds from the baby may not be heard by you. In case you really
want to hear all sounds from the baby room, you must set the sensitivity
to maximum (see chapter 4.6); with this setting the baby-unit is constantly
active.
3
2 OVERVIEW
2.1 OVERVIEW PARENT UNIT:
1. sound indication LED’s
2. volume up; up button when
programming
3. volume down; down button when
programming
4. button MENU/OK
5. link-check (
), see below
6. loudspeaker
7. charge contacts
8. battery compartment
9. microphone
10. start/stop lullaby
11. display (see paragraph 2.3)
12. power on/off
13. talk back
1
5
4
3
2
10
12
11
8
7
13
6
9
Link check :
ashes when there is no link between baby unit and parent unit or
parent unit is out of range with the baby unit.
on steadily when linked to the baby unit
in the full eco mode this lamp only lights when the parent unit actual
receives noise from the baby unit; in idle state this lamp is OFF
during FULL ECO mode
5
2.3 OVERVIEW DISPLAY:
on when night light is enabled
off when night light is disabled
on when lullaby is playing
on when the speaker volume is turned
off; off when the speaker volume is
turned on
on when sound alert is enabled
flashes when sound alert is triggered
indication temperature reading in Celsius or in
Fahrenheit
on when temperature alert is enabled, flashes when
temperature alert is triggered
on when the alarm time/count down timer is set, flashes
when the alarm time/count down timer is arrived
on when the FULL ECO MODUS is enabled
battery indication:
full battery level
2/3 battery level
1/3 battery level
battery empty
parent unit: this indication animates in cycle while charging. baby-unit: this indication does not light
when the power adapter is connected
displaying of the
several functions
and warnings
during use
displaying of the
several settings
during program-
ming
display parent unit
display baby-unit
7
ATTENTION:
NEVER install normal batteries in the baby unit. Normal batteries
cannot be charged. Risc of explosion if battery is replaced by an
incorrect type.
1. Remove the battery compartment cover.
2. Insert 4 x AA rechargeable batteries, observing their
polarities, into the battery compartment on the parent Unit. Only use
the supplied batteries with the following specifications:
voltage / capacity: 1.2V / 1300mAh or more
material / size: NiMH, AA, HR6, penlite
3. Reattach the battery compartment cover.
4. Connect the output plug of the mains adapter to the DC
socket on the side of the baby unit and the mains adap-
ter to the wall mains supply.
5. The battery indication
comes on and charging begins (this LED
remains lit, even when the batteries are fully charged)
Depending on the capacity of the batteries, It will take about 24 hours to
fully charge the batteries.
The power adapter for the baby-unit is inclusive. Rechargeable batteries
for the baby-unit are exclusive.
3.3 RECOMMENDATIONS:
Never place the baby unit inside your baby’s cot, bed or playpen.
MAKE SURE THE BABY UNIT AND MAINS ADAPTOR CABLE ARE
ALWAYS OUT OF REACH OF THE BABY.
Avoid exposure of the units to moisture or liquid.
Clean the units with a damp cloth.
Do not expose the units to extreme heat or direct sunlight.
8
4 USING YOUR BABY MONITOR
Please read these instructions carefully, and be reminded that this baby
monitor is just intended as an aid. It is not a substitute for responsible,
correct parental supervision.
4.1
POWER ON/OFF:
provided the parent unit is off, press and hold
<POWER> for about 2 seconds to switch-ON
the unit
provided the parent unit is on, press and hold
<POWER> for about 2 seconds to switch-OFF
the unit
4.2
LINK CHECK:
As soon as the parent unit is turned on, it starts looking for the baby unit.
1. The link-led blinks and the text [SEARCHING] comes on the
display
2. As soon as the parent unit finds the baby unit, the link-LED lights
steadily
3. In case the parent unit cannot find the baby unit within a period of 30
seconds (because it is not yet switched on, the batteries of the baby-
unit are empty
or the distance is too large), the text [ NOT LINKED]
comes on the display and attention tones sound every 10 seconds.
See also paragraph 4.15.
4.3 LANGUAGE:
It is recommended to fi rst set the language so that all text comes on the
LCD in your favorite language. By default the Dutch language is program-
med.
You only have to set the language onto the parent unit, the baby unit will
be synchronized automatically.
press the MENU button 2x
2 sec.
2 sec.
Menu
2x
9
nd the required language
press the MENU button to confi rm and to store
the setting
briefl y press the POWER button to end the pro-
gramming mode
4.4 MONITORING:
As soon as the baby unit detects a sound, it will send it to the parent unit.
receiving volume:
press the - button to decrease the volume or
the + button to increase the volume (5 levels +
volume-OFF)
• the icon
lights when the volume is set to off
(no sound)
You will hear an extra beep when the lowest or
the highest level is reached and when you press
the - or + button.
.
Optical indication:
the sound is also displayed visually by LED’s;
monitoring can therefore be carried out even
when the volume has been reduced or switched
off altogether
4.5 TALK BACK:
press and hold TALK on the Parent unit to speak
to the baby
control the volume on the Baby unit:
press the - button to decrease the volume or the
+ button to increase the volume
- +
Menu
- +
Talk
- +
10
control the volume on the Parent unit:
press the MENU button
nd the option [ BABY VOLUME ]
press the MENU button
Set the required volume (attention: the actual
volume does not change yet)
press the MENU button to confi rm and to store
the setting (only now the new volume setting will
be effective)
briefl y press the POWER button to end the pro-
gramming mode
4.6 SENSITIVITY:
You can adjust the sensitivity on the Parent Unit to monitor the sound
from Baby Unit:
press the MENU button
nd the option [ SENSITIVITY ]
press the MENU button
select the required level
There are fi ve levels of sensitivity which are
indicated by lighted blocks:
level 1 represents lowest sensitivity
level 4 represents a high sensitivity
level 5 represents the highest sensitivity (the
microphone is activated all the time)
You will hear an extra beep when the lowest or the
highest level is reached and when you press the - or
+ button.
Menu
- +
Menu
- +
Menu
Menu
- +
Menu
- +
11
press the MENU button to confi rm and to store
the setting
briefl y press the POWER button to end the pro-
gramming mode
4.7 SOUND ALERT:
With the volume set to off, the babyphone can still warn you with beep-
tones that the baby is crying loud.
enable/disable sound alert:
press the MENU button
nd the option [ SOUND ALERT ]
press the menu button 2x:
if the alert is currently off, it will now be set to on;
if the alert is currently on, it will now be set to off
briefl y press the POWER button to end the pro-
gramming mode
sound alert indication:
the icon
is on when sound alert is enabled
and it flashes when the sound alert is triggered
4.8 LULLABIES:
5 Different lullabies are programmed into this babyphone
start/stop:
press button
(baby-unit) or button
(parents unit) to start or to stop the playing of the
lullabies
(you can also press button
on the baby unit to
start playing the lullabies)
Menu
- +
Menu
2x
Menu
12
lullaby indication:
the icon
is on when the baby unit is playing
lullabies
select lullabies from the Parent unit:
press the MENU button
nd the option [ LULLABY ]
press the MENU button
look for the desired lullaby
( [ PLAY ALL ] = play all songs)
press the MENU button to confi rm and to store
the setting
briefl y press the POWER button to end the pro-
gramming mode
select lullabies from the Baby unit:
press button to select another lullaby
( [ PLAY ALL ] = play all songs)
control the volume on the Baby unit:
Press the - button to decrease the volume or the
+ button to increase the volume
control the volume on the Parent unit:
press the MENU button
nd the option [BABY VOLUME]
press the MENU button
Menu
- +
Menu
- +
Menu
Menu
- +
Menu
- +
13
set the required volume (attention: the actual
volume does not change yet)
press the MENU button to confi rm and to store
the setting (only now the new volume setting will
be effective)
briefl y press the POWER button to end the pro-
gramming mode
Play time:
the maximum play time for one or for all lullabies
is 15 minutes
4.9 NIGHTLIGHT:
You can control the nightlight directly on the baby unit or remotely by the
parent unit.
control the nightlight on the Baby unit:
press the
button to switch-on/off the nightlight
control the nightlight on the Parent unit:
press the MENU button
nd the option [ NIGHTLIGHT ]
press the menu button 2x:
if the nightlight is currently off, it will now be set to
on; if the nightlight is currently on, it will now be
set to off
briefl y press the POWER button to end the pro-
gramming mode
night light indication:
the icon
is on when the night light is switched
on
- +
Menu
15min.
Menu
- +
Menu
2x
15
temperature alert indication:
the icon
is on when the temperature alert is
enabled
working temperature alert:
If the temperature goes beyond the minimum or
maximum level, “COLD” or “HOT” indication dis-
plays and the current temperature flashes in the
displays of both Units.
If the Temperature alert is set to On, an alert will be sound at the Parent
Unit.
4.11 ALARM:
Alarm feature is useful for you to remind yourself for some special arran-
gements, like feeding time, etc.
press the MENU button
nd the option [ ALARM ]
press the MENU button
use the buttons -/+ to select between: [ OFF? ]
and [ SET TIMER ]
press the MENU button to disable the alarm
(to disable, now press MENU)
press the MENU button to set the alarm feature
1. pres the MENU button and use -/+ to set the
hours
2. pres the MENU button and use -/+ to set the
minutes
Menu
- +
Menu
- +
[ OFF? ]
[ SET TIMER ]
17
4.13 RANGE:
In case you are close to you baby, you might decide to reduce the trans-
mitting power
press the MENU button
nd the option [ ECO RANGE ]
press the MENU button
depending on the present setting, when pressing
the button MENU you now set the babyphone
into [ HALF RANGE? ] or [ FULL RANGE? ] (*)
press the MENU button to confi rm and to store
the setting
briefl y press the POWER button to end the pro-
gramming mode
* The power setting only takes effect 30 seconds after the baby unit is
idle (no transmitting). The effective ranges depend on your local circum-
stances and should be found out empirically.
4.14 FULL ECO:
When FULL ECO is activated, there is no transmitting at all when the
baby is not crying.
press the MENU button
nd the option [ FULL ECO ]
press the menu button 2x: if the Full Eco Mode is
currently off, it
will now be set to on; if the Full Eco
Mode
is currently on, it will now be set to off
Menu
- +
Menu
Menu
[ HALF RANGE ? ]
[ FULL RANGE? ]
Menu
- +
Menu
18
FULL ECO indication:
turns on when the FULL ECO mode is
enabled
Remarks regarding FULL ECO
Lullaby playback and a maximum sensitivity (level 5, see chapter 4.6) will
temporarily disable the Full ECO feature if Full ECO setting is set to ON.
The icon
however will still be on
.
Attention: The link check is not active in Full Eco mode; see the next
chapter.
4.15 LINK CHECK:
Automatic:
When the FULL ECO is disabled, the babyphone constantly checks the
link between the baby-unit and the parents-unit:
As soon and as long the parent unit is in contact with the baby unit,
the link-LED
on the parent unit lights steadily.
When the baby unit gets out of range (or is powered off), the link-LED
on the parent unit starts blinking and the text [ SEARCHING ]
comes on the display.
In case the link is not restored within 30 seconds, a beeptoon sounds
every 10 seconds and the text [ NOT LINKED ] comes on the display.
Once the link between the parent unit and the baby unit is restored,
the link-LED will light steadily and the text [ NOT LINKED ] will disap-
pear from the display.
19
Manual:
The link check does not function when the FULL ECO MODE is set. The
-LED is off and you will not be warned when you are out of range of
the baby-unit or when the baby unit is switched-off.
As follow you can however check the link manually
1. Press button TALK for about 0.5 seconds (*):
2. Link OK:
turns on and for a
couple of seconds you will
hear all sounds from the
baby-room
3. After some seconds the
FULL ECO MODE is
activated again and
turns off
*: if you press button TALK for a longer period, the feature TALK BACK
is activated and you might wake up the baby.
4.16 BATTERY INDICATION:
Both the parent unit and the baby unit are equipped with a battery level
indicator in the display:
: full battery level
: 2/3 battery level
: 1/3 battery level
: battery empty
Baby-unit:
the battery indicator is off when the baby unit is powered by the
power adapter
the battery indicator is on and indicates the capacity when the baby
unit is powered by batteries
2. No link:
turns on but starts fl ashing; you
will not hear any sound from the
baby-room and after 30 seconds you
will hear beeps as an indication that
there is no link
3. As soon as you have found the
cause of the no-link warning and
solved it, the FULL ECO MODE will
be activated again and
will turn
off
21
4.18 RESTORE TO DEFAULT:
As follow the settings of the babyphone can be restored to the default
values:
Parent unit:
press the MENU button
nd the option [ RESET ]
press the MENU button 2x
The parent unit switches off and on again and the settings are restored
to their default values:
Sensitivity: level 3
Night light: on
Language: Dutch
Lullaby: lullaby 1
Sound alert: off
Volume baby-unit: level 3
Alarm: off
Temperature format: Celsius
Temperature alert: off
Lower limit: 14
Upper limit: 39°C
Volume parents-unit: level 1
Full Eco Mode: off
Range:
maximum
Menu
- +
Menu
2x
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DBX-88eco bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DBX-88eco in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Alecto DBX-88eco

Alecto DBX-88eco Gebruiksaanwijzing - Nederlands - 28 pagina's

Alecto DBX-88eco Gebruiksaanwijzing - Deutsch - 28 pagina's

Alecto DBX-88eco Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info