Handleiding Alcatel One Touch Pixi 3 4.0 - 4013D (pagina 16 van 22) (Engels)

601702

Verklein

Vergroot

Pagina terug

1/22

Pagina verder

31 32

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary

bins if your jurisdiction or your region has suitable recycling and

collection facilities; instead they are to be taken to collection points for

them to be recycled.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO

THE INSTRUCTIONS.

• CHARGERS

Mains powered chargers will operate within the temperature range of:

0°C to 40°C.

The chargers designed for your mobile phone meet with the standard

for safety of information technology equipment and office equipment use.

They are also compliant to the ecodesign directive 2009/125/EC. Due to

different applicable electrical specifications, a charger you purchased in

one jurisdiction may not work in another jurisdiction. They should be

used for this purpose only.

• RADIO WAVES:

Proof of compliance with international standards (ICNIRP) or with

European Directive 1999/5/EC (R&TTE) is required of all mobile phone

models before they can be put on the market. The protection of the

health and safety for the user and any other person is an essential

requirement of these standards or this directive.

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE

TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed

not to exceed the limits for exposure to radio waves (radio frequency

electromagnetic fields) recommended by international guidelines. The

guidelines were developed by an independent scientific organization

(ICNIRP) and include a substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The radio wave exposure guidelines use a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit for mobile

devices is 2 W/kg.

Tests for SAR are conducted using standard operating positions with

the device transmitting at its highest certified power level in all tested

frequency bands. The highest SAR values under the ICNIRP guidelines

for this device model are:

4013X/4013D:

Maximum SAR for this model and conditions under which

it was recorded�

Head SAR GSM 900 + Wi-Fi 1.508 W/kg

Body-worn SAR GSM 900 + Wi-Fi 1.674 W/kg

During use, the actual SAR values for this device are usually well below

the values stated above. This is because, for purposes of system efficiency

and to minimize interference on the network, the operating power of

your mobile device is automatically decreased when full power is not

needed for the call. The lower the power output of the device, the

lower its SAR value.

Body-worn SAR testing has been carried out at a separation distance of

10 mm. To meet RF exposure guidelines during body-worn operation, the

device should be positioned at least this distance away from the body.

If you are not using an approved accessory ensure that whatever product

is used is free of any metal and that it positions the phone the indicated

distance away from the body.

Organizations such as the World Health Organization and the US Food

and Drug Administration have stated that if people are concerned and

want to reduce their exposure they could use a hands-free device to

keep the phone away from the head and body during phone calls, or

reduce the amount of time spent on the phone.

For more information you can go to www.alcatelonetouch.com

Additional information about electromagnetic fields and public health are

available on the following site: http://www.who.int/peh-emf.

Your telephone is equipped with a built-in antenna. For optimal

operation, you should avoid touching it or degrading it.

As mobile devices offer a range of functions, they can be used in positions

other than against your ear. In such circumstances the device will be

compliant with the guidelines when used with headset or usb data cable.

If you are using another accessory ensure that whatever product is used

is free of any metal and that it positions the phone at least 10 mm away

from the body.

Pixi3-4_4013X_4013D GB QG_Eng_EN_07_150113.indd 31-32 2015/1/13 13:56:24

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Alcatel One Touch Pixi 3 4.0 - 4013D Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Alcatel One Touch Pixi 3 4.0 - 4013D

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info