10
Included With Your Scanner
・ Owners Manual
・ Scanner with Antenna
・ Belt Clip
Note: If any of these items are missing or damaged,
contact your place of purchase.
Setting Up Your Scanner
These guidelines will help you install and use your new
scanner:
• If your scanner receives interference or electrical noise,
move the scanner or its antenna away from the source.
• To improve the scanner’s reception, use an optional
external antenna designed for multi-band coverage.
(You can purchase this type of antenna at a local
electronics store). If the optional antenna has no cable,
use 50-70 ohm coaxial cable for lead-in. A mating plug
might be necessary for the optional antennas.
• Use an optional mono earphone or mono headset with
proper impedance for private listening. Read the
precautions on the inside front cover of this Owners
Manual.
• Do not use the scanner in high-moisture environments
such as the kitchen or bathroom.
• Avoid placing the scanner in direct sunlight or
near heating elements or vents.
Installing and Replacing Batteries
You can power your scanner using three AA alkaline
batteries.
• Make sure the power is turned off.
• If the belt clip is attached, remove it (See page 13).
• Slide the battery compartment cover.
• Install three batteries in the compartment as indicated
by the polarity symbols (+ and -) marked inside.
