785798
71
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
20
4.7 General information on charging the battery pack
Do not charge the battery pack in the presence or vicinity of flammable liquids or gases.
In the (unlikely) event of the battery pack overheating or catching on fire, you must ensure that the battery does not come into con-
tact with water or other liquids. The only suitable extinguishing agent that is recommended by the battery manufacturers is sand.
Do not carry out the charging process in rooms where moisture may affect the battery pack.
Carry out the charging process with the wheelchair in a space at least twice its volume, with sufficient ventilation that there is no haz-
ard due to build-up of flammable gas.
Explosive gases can be generated while charging. Keep away the wheelchair and battery charger from sources of ignition, such as flames
and sparks.
Never charge the battery pack at temperatures below 0°C or above 40°C. If you attempt a charging process outside of this temperature
range, the charging process will be automatically aborted.
4.8 Safety instructions for the battery charger and the charging process
Switch off the system before starting the charging process. If the battery pack is being charged directly on the wheelchair, the wheel-
chair should be secured using its parking brakes to prevent it inadvertently rolling away.
Only use the charger included by Alber to charge the battery pack. The charging process ends automatically when the battery pack is
fully charged. This avoids overcharging.
Do not use any other charger than the one supplied by Alber.
Do not charge any other batteries with the charger; only charge the e-fix battery pack.
If the e-fix is not going to be used for an extended period (more than one day), the battery pack should not be left on the e-fix. Dis-
connect the charger from the mains socket first before disconnecting it from the battery pack.
Do not expose the charger to moisture of any kind during charging (water, rain water, snow, etc.).
Be aware of condensation. If the charger is brought from a cold into a warm room, condensation may occur on and in the device. In this
case, refrain from using the charger until all condensation has dissipated. Please note that this may take several hours.
Do not carry out the charging process in rooms where moisture may affect the charger.
Never carry the charger by its power cable or the charger cables.
Never tug at the power cable to disconnect the charger from the mains socket.
Lay the mains cable and charging cable so that no-one can tread on it or trip over it. Do not expose the two cables to any other harm-
ful influences or stresses.
Do not operate the charger if the power cable, the charging cable or the plugs attached to the cables are damaged. Damaged parts must
be replaced immediately by a specialist dealer that has been authorised by Alber.
Do not use or disassemble the charger if it has received a hard blow or was dropped or damaged in some other way. Take the damaged
charger to a specialist dealer that has been authorised by Alber to perform repairs.
The charger must not be used by children.
The charger is designed to operate only with mains alternating voltage of 100 V to 240 V.
Never attempt to disassemble or modify the charger.
Do not cover the charger during the charging process or place any objects on top of the device.
Never subject cable and plug to any pressure. Overstretching or bending the cable, pinching cables between a wall and a window frame
or placing heavy objects on a cable or a plug may result in electric shock or fire.
Never connect the two terminals of the charging cable to any metal objects.
Ensure that the plug is firmly inserted in the socket.
Do not touch the mains plug or the charging cable plug with wet hands.
Do not use the plug of the charger and/or the mains plug if they are wet or dirty. Before inserting them, clean the plugs using a dry
cloth.
Once the charging process is complete, first disconnect the plug of the charger from the socket and then disconnect the charging plug
from the socket on the battery pack.
Ensure that after disconnecting the charger, no moisture can get into the battery socket [29].
Before and after charging, ensure that the charger plug [33] and the sockets [29] on the battery pack are clean
and that there are no metallic particles. If you detect such particles, use a dry and clean cloth to remove them.
The charger plug is magnetic. Therefore prevent the plugs coming into contact with medical implants, electronic
storage media, bank cards or similar items.
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alber e-fix E35 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alber e-fix E35 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 8.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Alber e-fix E35

Alber e-fix E35 Gebruiksaanwijzing - Nederlands - 96 pagina's

Alber e-fix E35 Gebruiksaanwijzing - Français - 96 pagina's

Alber e-fix E35 Gebruiksaanwijzing - Espanõl - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info