785798
62
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
811
2.6.3 Travelling with the e-fix wheels in motorised operation
In motorised operation of the e-fix, its wheels must be engaged.
Turn the coupling ring [5] anti-clockwise as far as it will go; the release catch [4]
must not under any circumstances be pressed in the process. A green marker is now
visible in the viewing window [3].
Switch on the system (see chapter 5.2.1). The e-fix is now ready for motorised
operation.
When going downhill, power is fed back into the battery pack from
the drive wheels to increase the range. If you are travelling downhill
with a fully charged or almost fully charged battery pack and the
battery pack cannot take up any more power, this is indicated by a
warning in the control unit display (see table in chapter 6). If power
continues to be fed into the battery pack, the electronic system
automatically reduces the speed by 60 per cent.
If power consumption increases (if, for example you are travelling
on level ground or uphill), the e-fix can accelerate to the selected
maximum speed.
As soon as the charging process has finished, you can also accelerate
for a short time when driving on level ground.
The e-fix cannot be pushed manually in motorised operation.
The e-fix must only be used at temperatures between -25°C and
+50°C. Therefore, do not expose the e-fix to any heat sources (such
as intense sunlight) as this may cause surfaces to reach high tem-
peratures.
When not in use, do not expose your e-fix to strong sunlight for long
periods of time. This could cause the motor to heat up and in an
extreme case, not be able to operate at full power. Even plastic parts
age quicker under intense sunlight.
2.6.4 Range
All e-fix users are interested in the range of the system. In general, this is about 16 km
with a standard built-in battery pack (6 Ah), about 20 km for a battery pack of 7.5 Ah.
These are ideal values and relate to flat, paved terrain. Deviations may occur based on
topographical conditions, the ambient temperature, the surface being driven on, the tyre
pressure of the front wheels, the frame geometry, the weight of the wheelchair, the user
weight, and the type of drive wheels used.
4
i
i
!
!
For reasons of safety, the drive wheels must only be disengaged from motorised mode and set to push mode
while stationary and on a flat surface. The drive wheel must be load-free when being disengaged. To do so,
switch off the e-fix on the control unit. Actuating the clutch with a load or while travelling can damage the
internal mechanics and is thus not covered by the warranty or warranty service.
Disengaging on an incline can lead to a dangerous situation as the e-fix either switches either directly or sub-
sequently to neutral and thus, in the worst case, may start moving in an uncontrolled manner, i.e. may rotate
and/or roll downhill. Disengagement must only be performed on an incline in case of emergency and only if an
accompanying person is present to secure the wheelchair manually and using the wheelchair parking brake.
!
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alber e-fix E35 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alber e-fix E35 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 8.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Alber e-fix E35

Alber e-fix E35 Gebruiksaanwijzing - Nederlands - 96 pagina's

Alber e-fix E35 Gebruiksaanwijzing - Français - 96 pagina's

Alber e-fix E35 Gebruiksaanwijzing - Espanõl - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info