630521
9
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
9
Legato
When the legato feature is on, playing a note while another note is being held will not retrigger the
envelope for the new note, resulting in a smooth glide from the original note to the new note.
When the legato feature is off, playing a note will always trigger the envelope, giving each note
more definition.
To turn the legato feature on or off for each voice:
1. Press and hold Shift and then press Step Switch 8 (Legato). Keep holding Shift.
2. The display will show the number of current voice (14) and a two-letter indicator that
legato is off (Of) or on (On).
To select a voice, press Step Switch 8 (Legato) to move to the next voice (14).
To activate/deactivate the legato feature, turn the Tempo knob to turn the setting off (Of)
or on (On).
To return to normal operation, release Shift.
MIDI Channel
Each of the four voices responds to messages on a MIDI channel from Timbre Wolf’s
keyboard or from an external MIDI device. The MIDI Channel setting determines the channel
for Voice 1. Voices 2–4 use the three next-highest MIDI channels in sequential order.
Example: If the MIDI Channel is set to 3, Voice 1 will respond to messages on Channel 3.
Voices 2, 3, and 4 will respond to messages on Channels 4, 5, and 6 (respectively).
When the Voice Mode Selector is set to Mono, each voice will respond independently to
MIDI messages on their respective MIDI channel. The keyboard will always send its messages
on the channel of the currently selected voice.
When the Voice Mode Selector is set to Poly or Unison, all four voices will respond to
incoming MIDI messages on Voice 1’s MIDI channel only (playing polyphonically or in unison,
respectively). The keyboard will always send its messages on Voice 1’s channel.
Important: Because all four voices use adjacent MIDI channels, as described above, the
ranges of available channels are different for each voice:
Voice 1 can use Channels 1–13
Voice 2 can use Channels 2–14
Voice 3 can use Channels 3–15
Voice 4 can use Channels 4–16
Note: While Timbre Wolf’s sequencer plays, it will send out its MIDI note messages for all four
tracks (each on its corresponding channel) through its USB port and MIDI Out, regardless of
the voice mode or any performance on Timbre Wolf’s keyboard. You can use this feature to
sequence external devices (drum machines, other synths, etc.) along with Timbre Wolf.
To set the MIDI channel:
1. Press and hold Shift and then press Step Switch 10 (MIDI Ch). Keep holding Shift.
2. Do either of the following to set the channel:
Press Step Switch 10 (MIDI Ch) to move to the next channel, which is shown in the
display.
Turn the Tempo knob to select the channel, which is shown in the display.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai Timbre Wolf bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai Timbre Wolf in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 7,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info