630521
6
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
6
Rear Panel
12 13
1011
1
2
3
5
6
8
9
7777
4
1. DC In: Use the included power adapter (12V, 2A, center-positive) to connect this jack to a
power outlet.
2. Power Button: Press this button to power Timbre Wolf on or off.
Important: After powering Timbre Wolf on, let it warm up before using it. Its tuning can be
affected by the temperature.
3. Cable Restraint: You can secure a cable to this restraint to prevent it from accidentally
unplugging.
4. Kensington
®
Lock Slot: You may use this Kensington lock slot to secure the Timbre Wolf
to a table or other surface.
5. USB Port: Use a standard USB cable to connect this port to an available USB port on
your computer. This connection lets Timbre Wolf send and receive MIDI over USB to and
from your computer.
6. Main Out: Use a standard 1/4” (6.35 mm) TRS or TS cable to connect this output to the
input of an audio interface, mixer, amplifier system, etc.
7. Voice Outs 14: Use standard 1/4” (6.35 mm) TRS or TS cables to connect these outputs
to the inputs of an audio interface, mixer, amplifier system, etc. Each Timbre Wolf voice is
sent separately to each of these outputs, so you can record or mix them independently of
each other. When a cable is connected to one of these outputs, that voice will be removed
from the Main Out and Phones Out. The Howl knob does not affect these outputs.
8. Phones Out: Connect your standard 1/4” (6.35 mm) stereo headphones to this output.
9. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an
external MIDI device (e.g., another MIDI controller).
10. MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of an
external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).
11. MIDI Thru: Use a standard five-pin MIDI cable to connect this MIDI Thru to the MIDI In of
an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.). All messages
sent from this MIDI Thru are identical to the messages received by Timbre Wolf’s MIDI In.
12. Gate Trig Out: Use a standard 1/8” (3.5 mm) TS cable to connect this output to the input
of an optional external device that can receive Timbre Wolf’s Gate (trigger) messages.
13. Gate Trig In: Use a standard 1/8” (3.5 mm) TS cable to connect this input to the output of
an optional external device to send Gate (trigger) messages to Timbre Wolf.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai Timbre Wolf bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai Timbre Wolf in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 7,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info