630544
7
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
7
Recording Samples
Record Sample Mode lets you record a sample to a connected SD card using the built-in
Microphone or Rec In jacks. Samples are saved as WAV files.
Important: You must have an SD card inserted into the SD Card Slot to enter Record Sample
Mode.
To enter or exit Record Sample Mode, press the Record Sample button.
This is an overview of MPX16's display on its Record Sample
screen. Use the Select +/– buttons to move the cursor between the
different fields, and use the Value Dial to change the currently
selected field's setting or value.
Monitor (Mon): Determines whether the recorded audio will
be sent to the Main Out/Headphone Out (On), or neither
(Off).
Source: Determines from where the sample is recorded. When set to Mono L, the signal
will be recorded in mono from the left Main Out jack only. When set to Mono R, the
signal will be recorded in mono from the right Main Out jack only. When set to Stereo,
the signal will be recorded in stereo from both Main Out jacks.
Threshold (Thresh): Determines how loud the signal must be before MPX16 begins
recording. The available range is -60 dB to 0 dB. Alternatively, you can disable the
threshold (Off), which lets you begin recording immediately after pressing the Value Dial.
To record a sample:
1. Press the Value Dial.
If a Threshold is set, MPX16 will begin recording when the
incoming audio signal exceeds the Threshold. Alternatively,
you can simply press the Value Dial once more to start
recording immediately.
If the Threshold is Off, press the Value Dial to star recording
immediately.
2. Stop recording by pressing the Value Dial once more.
To keep the recorded sample, press the Value Dial again. Use
the Select +/– buttons to move the cursor and use the Value
Dial to change the character.
To discard the recorded sample and try again, press
Record
Sample.
3. After naming the sample, you will be asked to assign the
sample to a pad.
To assign the sample to a pad, press the desired pad, and
then press the Value Dial. This will replace the sample on that
pad with the one you just saved.
To keep the sample but not assign it to a pad yet, press the Main button.
Record Sample
Mon:Off
Source: MONO L
Thresh: -10 dB
Press Enter> ARM

|
Armed...
Mon:Off
Source: MONO L
Thresh: -10 dB
Enter> Start!

|
Recording...
Mon:Off
Source: MONO L
Thresh: -10 dB
Enter> Stop

|
Name Sample...
SAMPLE001
Press ENTER>Keep
Press REC >Redo
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Akai-MPX16

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai MPX16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai MPX16 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info