Page ii
WARNING
WARNING
The DR16pro is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that your
DR16pro meets the power requirements in your area. If in doubt, consult a qualified electrician or
AKAI professional dealer.
120VAC @ 60Hz for USA and Canada
220-230/240VAC @ 50Hz for Europe
240VAC @ 50Hz for Australia
PROTECTING YOURSELF AND THE DR16pro
•
Never touch the AC plug with wet hands.
•
Always disconnect the DR16pro from the power supply by pulling on the plug, not the cord.
•
Allow only an AKAI professional dealer or qualified professional engineer to repair or reas-
semble the DR16pro. Apart from voiding the warranty, unauthorized engineers might touch live
internal parts and receive a serious electric shock.
•
Do not put, or allow anyone to put any object, especially metal objects, into the DR16pro.
•
Use only a household AC power supply. Never use a DC power supply.
•
If water or any other liquid is spilled into or onto the DR16pro, disconnect the power, and call
your dealer.
•
Make sure that the unit is well-ventilated, and away from direct sunlight.
•
To avoid damage to internal circuitry, as well as the external finish, keep the DR16pro away
from sources of direct heat (stoves, radiators, etc.).
•
Avoid using aerosol insecticides, etc. near the DR16pro. They may damage the surface, and
may ignite.
•
Do not use denaturated alcohol, thinner or similar chemicals to clean the DR16pro. They will
damage the finish.
•
Modification of this equipment is dangerous, and can result in the functions of the DR16pro
being impaired. Never attempt to modify the equipment in any way.
•
In order to assure optimum performance of your DR16pro, select the setup location carefully,
and make sure the equipment is used properly. Avoid setting up the DR16pro in the following
locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
