630565
6
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
4
Key Delay: Since the EWI USB is electronic and responds to fingering input much faster than an acoustic instrument,
you may find it plays extra notes. This Key Delay setting determines the reaction time of the EWI USB’s note keys. A
higher setting will result in a slower key response. (For beginners, we recommend a higher setting to reduce the number
of note “glitches.” Most intermediate players can play much cleaner with a setting of 10–12.)
Performance Controls:
Reset: Restores the default EWI
Configuration.
Load: Loads only the Performance Control
data only from a previously saved SysEx
file. If the file was saved in Aria, it will
contain both Performance Control and
Controller Configuration data, but only the
Performance Control data will load here.
Save: Saves the current Performance
Control and Controller Configuration data
together as a SysEx file. This will save only
the settings in the Performance Controls
and Controller Configuration tabs. Because
Aria can save so many different SysEx files (which affect different settings), be specific when naming your saved files so
you can recognize what kinds of settings (and, therefore, where you can load it) in the future.
MIDI Channel: When an instrument’s channel is set to its own number (instead of -OMNI-), match this MIDI Channel
with that number to hear that instrument. The number of the MIDI Channel setting must match the number of the
instrument’s channel in order for you to hear it. (Any channels set to -OMNI- will be heard regardless of the MIDI
Channel setting.) See Channel under the CHANNELS OVERVIEW section (below) for more information.
Transpose: Transposes the notes played by the EWI USB, essentially changing the “concert” key. You may transpose
as much as an octave higher (+12 semitones) or an octave lower (-12 semitones). This makes it easier to play music
written for an instrument in a different key.
Fingering: Determines the fingering configuration of the EWI USB in the software. See the FINGERING CHARTS in the
EWI USB Quickstart Manual for more information.
Controller Configuration:
Reset: Restores the default EWI
Configuration.
Load: Loads only the Controller
Configuration data from a previously saved
SysEx file. If the file was saved in Aria, it will
contain both Performance Control and
Controller Configuration data, but only the
Controller Configuration data will load here.
Save: Saves the current Performance
Control and Controller Configuration data
together as a SysEx file. This will save only
the settings in the Performance Controls and
Controller Configuration tabs. Because Aria
can save so many different SysEx files (which affect different settings), be specific when naming your saved files so you
can recognize what kinds of settings (and, therefore, where you can load it) in the future.
Breath CC1: Determines what MIDI data the EWI USB’s breath sensor sends. The default is “Breath Controller
(coarse).” The software is set to have its instruments respond to this setting, so if you change this, the instruments in the
software will not respond correctly.
Breath CC2: Determines what MIDI data the EWI USB’s breath sensor sends.
The default is “Aftertouch.” Some of the instruments in the software are set to
respond to Aftertouch, so if you change this, the instruments may not respond
correctly.
Bite CC1: Determines what MIDI data the EWI USB’s bite sensor controls
(see Performance Controls above). The default is “Pitchbend Down-Up”
(vibrato).
Bite CC2: Determines what MIDI data the EWI USB’s bite sensor controls
(see Performance Controls above). The default is “OFF.”
Velocity: Specifies the velocity of notes sent from the EWI USB to the
software (that is, how hard the “attack” of a note is – not volume). The default
is “Dynamic.”
Pitchbend Up Control: Determines what MIDI data the EWI USB’s pitch bend-up plate controls. The default is
“Pitchbend Up.”
Pitchbend Down Control: Determines what MIDI data the EWI USB’s pitch bend-down plate controls. The default is
“Pitchbend Down.”
Note
:
More advanced MIDI
users might experiment with the
CC assignments while using the
EWI USB in other software. But
for beginners, we recommend
sticking to the default
configurations in Aria (especially
the default Breath CC1 and
Breath CC2 assignments) since
they are the most “intuitive” to
use with the EWI USB.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai Aria software bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai Aria software in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info