793942
8
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
en 14
15
BLUETOOTH MODE
BLUETOOTH PAIRING
Prior to using the Bluetooth function, your boombox should be paired first with your Bluetooth
device. (“Pairing” means establish connection between Bluetooth devices such as mobile phones,
tablets, pc, etc).
1. Press the /MODE button to switch to
btBluetooth mode.
(fig. 1)
2. In Bluetooth mode, a voice prompt will
announce Bluetooth pairing mode and the
bt” will flash on the display.
The BLUETOOTH MODE INDICATOR will
appear on the top middle of the display.
And the boombox will search automatically
for Bluetooth devices.
3. Turn on the Bluetooth function on your
device and make it visible (see your
device's instructions to add or setup a
Bluetooth device).
4. Search for Bluetooth devices and select
AIWA BBTC-550
Enter the code “0000” if needed.
(fig. 2)
If the devices are paired successfully, the
word “bt” will keep bright on the display,
and a prompt voice will notify that Bluetooth
device is connected.
Having paired successfully, the device will
connect automatically next time.
5. Briefly press to disconnect the paired
Bluetooth device.
(fig. 3)
PLAY FROM A BLUETOOTH DEVICE
1. Press the button to play.
2. To pause or resume play, press the
button again.
3. Turn the tuning knob to or position to
select a dierent track number.
Note:
Compatibility with all Bluetooth devices
is not guaranteed.
TIME SETTING
SETTING THE CURRENT TIME
This unit has a built in 24 hours format clock
function. Follow the below steps in order to set
the time.
1. While the boombox is in standby mode,
press and hold the PROG/TIME button for
2 seconds.
The time 00:00 will appear flashing on
the display.
2. Turn the TUNING KNOB to the or
positions to set the hour and press the
PROG/TIME button to confirm.
Then the minutes digits on the display will
start flashing.
3. Turn the TUNING KNOB to the or to
the positions to set the minutes and
press the PROG/TIME button to confirm.
Note:
If no button is pressed for 10 seconds,
the boombox will automatically cancel the
time setting operation.
AUXILIARY INPUT FUNCTION MODE
This unit can be used as an active speaker for
laptop computers, MP3 and other small audio
players following the steps below.
1. Press the /MODE button to turn on the unit.
2. Press the /MODE button repeatedly until
the “AUX” (auxiliary input) function mode
appears flashing on the display.
Once the auxiliary input mode has been
entered, the AUXILIARY INPUT MODE
INDICATOR will appear on the top right
of the display.
3. Connect an auxiliary cable ended with a
3.5mm to the desired external audio device,
and connect the other end to the AUX IN
socket on the side of the unit.
4. Start playback on the external audio device.
Adjust the volume on the external audio
device (do not set the volume to a high
level in order to avoid distortion). You may
also adjust the volume on the boombox. To
control playback function, use the controls
on the external audio device.
AUX-IN MODE
Note:
The boombox cannot access the contents
in the connected external device.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aiwa BBTC-550 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aiwa BBTC-550 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 9.63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info