594023
31
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
29
Protect the machine from frost and rain. With temperatures below zero, the valves
can freeze to the pump which may cause damage to both motor and pump.
Notice: insufficient air supply, too high temperature and fouling of the air
filter reduce the efficiency of the compressor considerably.
3.1 ELECTRIC CONNECTION L/LM/KM/BLM
At the factory the machine is already fully equipped with cables. The machine now
has to be connected to your own electricity supply. Beware that voltage and
amperage of your electric circuit meet the needs of the motor. For that check
technical details. Use only cables with the right diameter. The factory advises to
use cables of at least 2,5 qmm.
Before first use first read chapters 3.2 and 4.0.
3.2 AIR CONNECTION
The compressor is equiped with an air reduction/filter combination with two
closable air connectors (except type L 5-90).
Best use for connection of the compressor to an air circuit a flexible hose, to
isolate fibrations from the machine. The diameter of the hose must meet the
diameter of the air connection on the compressor. For quickly attaching and
unattaching of hoses and pneumatic tools it is well advised to use quick-couplings.
4.0 FIRST USE
1 Check if the instructions mentioned above have been executed.
2 Check the oil level of the compressor. Possibly oil has been lost during
transport. The oil level has to be between the upper side of the oil level glass
(12) and the red dot. If necessary, fill with AIRPRESS compressor oil.
3 V-belt models: check the tension on the V-belt. At the right tension the V-belt
can easily be turned by hand approximately 45 degrees. If necessary improve
tension (see chapter 6.0 point 5).
5.0 L, LM AND KM COMPRESSORS
5.1 FUNCTIONING
When the pressure switch (2) is turned on at an air pressure of 0 bar/psi, the motor
(8) will start. The motor is directly connected to an one, two or three cylinder pump
(11).
When a specific pressure has been achieved, the pressure switch automatically
stops the motor and relieves the internal air circuit from pressure. When air is
being used, pressure will drop. When low enough, the pressure switch will start the
compressor again automatically.
With the reduction valve (5) you can reduce a too high air tank pressure to a
desired working pressure. The step less adjustable pressure can be read from a
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Airpress 36522 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Airpress 36522 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info