In addition to the built-in flash memory, your camera can store
data on a Secure Digital (SD) card or a MultiMedia card (MMC).
To insert a memory card, do the
followings:
(1) Open the LCD panel.
(2) Push the SD/MMC card slot, and it
will pop up.
(3) Gently push the card as indicated
until the card reaches the bottom
of the slot.
To remove the memory card, gently
push the card and it will pop up. Then
pull the card out of the slot.
Inserting a memory card (optional)
Do not remove the memory card while the camera is processing
data (when the LED is blinking).
When a memory card is inserted, the camera will use the card
as the main storage medium. Files stored in the camera’s built-in
memory will become inaccessible until the card is removed.
The SD card comes with a write-protect switch. When the write-
protect switch is set to the Lock position, the card will become
non-writable. To ensure that the camera can operate normally,
you should set the write-protect switch to the Unlock position
before inserting the SD card.
2
1
3
Label
side
