The firebricks fitted to the Rayburn 212SFW are of first
quality manufacture, and providing the cooker has been
installed and used correctly will have a reasonable life.
They are, however, expendable items and in time will
require renewal.
Replacement bricks either in sets or singly can be
obtained from your Rayburn distributor. Always quote the
manufacturing number.
The manufacturing number, which will be found on a data
plaque fixed to the appliance, should be quoted if any
questions arise in connection with this Rayburn Cooker.
Rayburn 212SFW
The cooker has been designed to provide a satisfactory
supply of domestic hot water with a normal day’s cooking,
providing the cooker is kept alight overnight and the
system, complete with lagged cylinder, conforms to the
installation instructions.
In some circumstances it may be possible to overheat the
appliance and the water inside will boil. This will be
evident by the sound of a knocking noise coming from the
appliance and pipes around the house. If this occurs close
off all air controls and manually start the central heating
pump if fitted. Opening the oven doors and hotplate
covers will help to release heat from the appliance. Be
aware that steam and boiling water will be expended from
any open vent from the heating system probably in the
roof space at the expansion tank.
In the unlikely event that the appliance is not operating in
freezing conditions the water must be drained from the
boiler to prevent frost damage.
Always use a qualified service/heating engineer when
servicing or maintenance is required. Use only authorised
replacement parts. Do not make unauthorised
modifications.
Properly installed and operated, this cooker will not emit
fumes.
Occasional fumes from de-ashing and re-fuelling may
occur but persistent fume emission must not be tolerated.
If fume emission does persist, then the following
immediate action should be taken:
1. Open doors and windows to ventilate room.
2. Let the fire out or remove lit fuel from cooker.
3. Check for flue or chimney blockage, and clean if
required.
4. Do not attempt to re-light the fire until cause of fumes
has been identified, and if necessary, seek
professional advice.
Spares List No
Part Number Description Required
Required
RS4F 3-51-2A L.H. Side Firebrick 1
RS4F52-7A Middle L.H. Side Firebrick 1
RS4F3-54-8B Top L.H. Side Firebrick 1
RS4F 3-48-4A Bottom R.H. Side Firebrick 1
RS4F 50-5A Top R.H. Side Firebrick 1
RS4F 3-47-3A Bottom Front Firebrick 1
RS1M 90040 Ashpan 1
RSFM 61 Operating Tool 1
Replacement parts if required are available from your
local stockists.
8
FIREBRICK REPLACEMENT
HOT WATER SERVICE
SERVICING
FUME EMISSION WARNING
SPARE PARTS
